Reviews
SHOEIHelmet changed from X14 to X15
I purchased a new bracket for my helmet because I changed my SHOEIHelmet from X14 to X15 (see photo). This manufacturer has a reliable supply support system, even down to the smallest parts. View detail
Excellent "point to take with "Motorcycle
[How is it used?
...from approximately December 17, 2022 to September 21, 2023, inclusive.
Base is attached to the helmet using the included double-sided tape mount.
Was the one you received as per Image?
As shown in the image, as shown in the Image.
The previous generation:Bs-8a (https://www.webike.net/sd/23562886/) looks almost the same, for better or worse.
How was your experience with it?
The signal is almost always visible while it is on the screen with no problems at all, giving a sense of security. Also, the image quality is clear enough to be recognized.
The battery can also be recorded at all times while running from morning to night, except during breaks. However, if you run until nighttime, it is safer to charge the battery somewhere during breaks.
USB TypeCCable is used for charging, but it is not recognized if both ends are CCable, and USB-A is required for the One Side. In short, a cable that can charge B+COM SB6X is acceptable.
The Magnet base is a Strap that prevents falling off, but falling while driving has not occurred since the previous generation.
Because it is mounted on a helmet, it has the advantage of being able to take pictures in the direction it is facing, unlike vehicle-mounted systems.
To mount on Helmet, if the driving posture changes between motivated and unmotivated, the angle must be readjusted or only the sky will fit in the angle of view.
Because it is mounted on a helmet, the Image is easy to record against a four-wheeled vehicle that will bury the Motorcycle in a single blow.
The file is recorded on a microSDCard, but the internal file can be viewed on a Smartphone (Google Pixel 7 Pro) by using a type-CAdapter from USB-A while the SDCard is inserted in the body.
The sound and vibration notifies the user when the device is activated and when it is closed, so the user does not have to worry even if the Body is not visible from the mounting position.
I felt evolution from the previous generation because various settings can be made only with Body by long-press activation.
Mysterious blinking function added to Light, but not yet used.
Body weight is not light, but I don't think I feel a tilt in the center of gravity or directly related to fatigue when running around with it on Helmet.
[Points to note]
Although the body has evolved, with settings now possible only on the body and the charging terminal changed to type-C, the parts described in the previous generation's Impreza (https://imp.webike.net/article/414070/) remain unchanged.
The round part connecting the rubber cover on the back to the body is still too thin, and even though I had recognized it, I tore it off the first time. However, the rubber cover itself is too tight and does not come off unexpectedly.
The screws on the mounting base were re-tightened and hardened with Aron Alpha. The tightness of the screws determines the fixation of the body, so if the screws are tightened too much, it will be impossible to change the angle of the body.
How did it compare to other products?
Despite the weight of the Body, we felt that in many cases this product was superior in terms of continuous shooting time.
The image quality is beautiful, but if you want to keep a record of your touring and conversations at Income, I thought it would be easier to use SENA, which is integrated with CameraIncome.
In exchange for its weight, this product boasts a long recording time. Although we have not been able to evaluate the durability of the product, we believe that it is highly durable, as Base is used in Japan where the equipment is running around and waiting for prey without regard to the season or weather.
On the other hand, except for the Body, all the shortcomings of the previous generation have been carried over, including the giving up of the possibility of seeing no evolution except for the Body.
View detail
I would have liked to have continued to sell BS−10
I replaced my BS−10 that I had been using for less than 4 years when it failed.
I considered the successor model, but it had improved functionality or was considerably more expensive, so I had to settle for the BS−8c.
This is the popular version that omits Wi-Fi, GPS, and Others.
Well, that being said, the minimum requirements for a driverless camera are met, so I think this is a good thing if the price is acceptable. However, what I would like to see improved is the reliability of the Adapter−? I would like to improve it, but what I would like to see improved is the unreliability of the Adapter & minus;? The most important thing to remember is that the camera is not a "real" camera, it's a "real" camera, and it's not a "real" camera. I don't use it in Helmet, I fix it in Handlebar with Option Parts.
I have to use BS−9b to mount it on my Helmet, because the Helmet mounted Adapter− moves easily and I have to adjust the angle of view with my phone using Wi-Fi every time I use it. For now, I'm using it as a connection until I install the M company's body-mounted DVR.
View detail
Impressions after using it for commuting.
I am currently using it for commuting on my Motorcycle in case of an accident.
The image is not as clear as I would have liked for using image stabilization, but I think that's about it.
One complaint is that the battery does not last as long as expected, so we would like to see improvements here.
Also, when I removed the waterproof and dustproof rubber part of the back part of the body to charge the battery, the thin rubber part that connects it to the body broke off (I contacted the manufacturer and they sent me the part because it was an initial defect). (I contacted the manufacturer and they sent me a part.
We trusted JAPAN and were reassured that After Service would be done properly.
View detail
Defective in protective rubber
When I tried to charge the battery, I removed the BlackRubber that is attached to protect the important parts of the Power Supply Cable etc. and bent it slightly, and the part connected to the Body was cut off. Since the body and the rubber part for protection are now separated, I have to be careful not to lose it when I charge the battery. I was disappointed with the quality of the product and was dissatisfied with the defects that occurred immediately after opening the package. Is it really JAPAN? View detail
For fixing the Handlebar
I had been using a DriveMan with a helmet, but the weight of the camera began to strain my neck, so I bought this Adapter for use with a Handlebar.
It has a wide range of pipe diameters, so you can install it not only around the handlebar, but also on the bumper, side case bracket, and many other places.
I am using it attached to Handlebar for now.
The mounting surface on the pipe is covered with rubber to improve adhesion, but I also wrapped a rubber plate around the handlebar to improve adhesion and prevent vibration and wounding.
However, to attach the DriveMan Body, you will need an additional optional Adapter.
View detail
Adapter required to install DriveMan
Adapter required to install the DriveMan Body.
Camera Mounting AdapterThe Helmet Adapter is fixed with 3M's cooperative adhesive seal, but the Bracket for fixing the Handlebar needs this Adapter with screw holes (essential for fixing the Camera), so I bought it at the same time.
There was some information that the screw holes were causing cracks, so I contacted webike, and they said that the ones currently in circulation were improved, so I bought them.
The price is the same as the Bracket for fixing the Handlebar (2500 yen without tax), which is rather expensive.
5,000 yen is expensive for simultaneous purchase.
View detail
Improved Tripod Adapter
I inquired about the crack around the embedded nut before ordering, and confirmed that it has been improved.
I haven't used it yet so I don't know, but it seems to be more durable than the old model.
View detail
Purchased as a spare
The other day, I wanted to see if I could change the mounting position of the DriveMan, and when I purchased the DriveMan, it was included as a spare I bought it from Webike because I ended up using one that had been done, and I bought it from Webike
The double-sided tape that I purchased was used to make the large format Double-Sided Tape of Emon i'm going to mold it into sided tape to create it
Instead of using the spare Double-sided tape that came with your DriveMan purchase, the I regret a little bit that I should have made it on Large size double-sided tape I am...
View detail
Easy to use, but the quality is not so good
Crack enters immediately around the Fixing Screw area
Even if it's lightly tightened up, it still vibrates after a day of running? When I got home to check on the Crack at
I bought it again 3 times and it cracked again, so I gave up and Repaired it and am using it
Material or shape should be improved
View detail
Purchased as a spare
I bought it as a spare because I am not sure about the durability of the ball joint and the tightening part ...
I didn't buy it from Webike, but the price is the same on all shopping sites
View detail
Easy to use.
Originally it was a Type attaching Camera to Helmet, but I bought this because there is something to get in the way or getting in the way because of weight.
Actually wearing Motorcycle's Handlebar makes it possible to shoot the direction of travel reliably, and I like the angle at the time of bending, and I like it..
Because it can not be used in Korea Single Body, as for anyway Tripod Adapter and Quantity : I wanted you to sell it with Set.
I was bad that I did not read the contents of the product well ... (Lol)
View detail