Reviews
StylingUp and Improved usability
Styling couldn't be better.
However, the difference is Large because the OEMSeat is too comfortable, but the Cornering by the appearance and the load from the buttocks is much improved.
View detail
good-looking
Replaced with Swing Arm replacement.
Better looking than OEM
View detail
Has the Shift's entry been further improved?
I purchased this product for the purpose of further improving the shifting of my MONKEY125 (JB02). First of all, I would like to conclude that I am honestly not sure about it? I originally installed KITACO's Shift link, so I thought it would improve the shift entry compared to NORMAL, but it didn't.
I had a short test drive, and I was pleasantly surprised by the improvement? I am planning to go on a long touring trip. I am planning to do long touring from now on, so I expect that my impression will be different. If I can confirm the improvement, I will give my impression again.
View detail
Cannot be installed with this product alone.
It is very light in weight. However, it requires nsr50 Late OEM Color for installation (Discontinued 52141-GT4-970) (e.g. "I'll be back") View detail
Genuine G-Craft Suspension Hools (stand bobbins) for Honda Monkey 125
Whilst I was ordering the clutch cover for the Monkey 125, the customer asked to order a set of these stand bobbins too so it would be easier to work on the bike. Not a problem and super easy to find. The cost is ridiculously low and for what you get for your money a cool. Witht he other parts in my order, I got them all shipped together to save some funds and were all delivered in 5 days. The stand bobbins came in the shrink wrapped packet and were well presented. These do come in 2 parts so are pretty straight forward to fit together, then it is just a case of bolting to the bike. The quality of these look awesome and do look like they will last a fair while. I did have my doubts with the small bolts but they do seem to hold up well. No issues there. Very pleased with how they fit sand how easy they are to install. Thanks Webike View detail
I've lost track of a lot of things ….
I chose Large after much deliberation among the many manufacturers, and it was the right choice.
The engraving is cool, the aluminum is shiny, and there is nothing to complain about. I can't complain about it.
View detail
Refreshing.
It is the QUALITY I expected. No doubt. It's quintessential Gee Craft. View detail
Genuine G-Craft Clutch Cover for Honda Monkey 125
A customer wanted a new clutch cover as theirs was a little scratched up with general wear and tear. I have not purchased G-Craft items before but have read a lot of great reviews so why not. This is what they wanted. Finding the right clutch clover for this bike was super easy. Using the search function for this model of bike and there are lots of options but only the one G-Craft. The price was really good for such a nice part. With a few other parts, my order was shipped using EMS and arrived in 5 days. The clutch cover came in a shrink wrapped packet and was well protected during transit. In the packet, there are a few bolts which you do need as the old ones were not going to work with the extra depth. Along with a few spacers for the cover to utilise. The cover itself is a nicely cnc'd part and looks really neat. It is super easy to install, just remove the old bolts, add this cover and use the new bolts and spacers provided and re-torque and that's it. Very well presented part and looks really cool once fitted. Great work guys. View detail
I feel like it's a lot sturdier.
This time I purchased GCraft's Shift guideTYPE 3 for CT125. This product is said to reduce the flexing of the GEARShaft and make the shift change quicker. It is true that the HUNTER sometimes has a problem with up-down when shifting, so it would be very nice if this problem could be solved.
Also, they say that the Shaft is longer, so the torsion and distortion will be worse.
We immediately started the installation process of the products we received:??
If you remove the Engine Guard, footpeg, and Shift Pedal? Oh, ??Shaft is shorter than JA55, in fact, there is only enough clearance for the thickness of the shaft....
Is there not much Merit in this? I thought so, but I recovered and completed the work. The work took approximately 45 minutes.
I was a little anxious, but when I tried it out, I found that ?? the shift change from 1st, 2nd, 3rd gear and N was very smooth. In addition, the transmission of power is simple and no unnecessary force is required.
The impresario of the same Parts on the Net is No change. Ya It's gotten heavier." I think that this is a significant improvement in operability. I drove about 45-50 km and had no problems at all.
View detail
StyleUp is a sure thing, but the rider's body shape will affect the Riding.
The GCraft seat is a good choice for me because of the balance between the tank and the seat. The ground contact area of the seat is limited, so in a positive sense, the position is fixed and the stability is increased. If you are heavy or taller than 170cm, you may feel cramped. View detail
Ideal for fall prevention
The product is good, but WeBig's shipping is good and very good.
Companies A and R are slow to purchase from inventory and are not counted on.
View detail
I am more then satisfied with the positive and direct feel now felt when changing through the gears
About quality and texture - The shift guide from G-Craft uses a sealed bearing unit and is made from billet aluminum with detailed machining and a silver anodized surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - I was unimpressed with the overall feel of the original setup for the gear shifting as it felt vague. The transformation with the simple addition of this shift guide is amazing and I am more then satisfied with the positive and direct feel now felt when changing through the gears. Products to buy together - A product to purchase that will also ad in improved gear shifting is an adjustable shift rod that will allow you to perfectly position the gear lever to your desired position using the rest of the original rearsets. Difficulty of installation - The installation of the shift guide is a intermediate task that took 1 hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to secure the shift guide over the shifter shaft to the engine case. Cost performance and comparison with other products - I find the cost of all the products G-Craft sell to be on par when compared to what most other companies sell their products for but this is not the case with the shift guide as there are quite a few cheaper options available here on Webike. About shipping and packaging - With there being no cost difference between sea freight and EMS for the shift guide, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
Fender Eliminator
The installation was not difficult, and I like the fact that the OEM license plate light is used! View detail
The transformation with the simple addition this rear master cap is amazing
About quality and texture - The rear master cap from G-Craft is made from billet aluminum with detailed machining and a silver anodized surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - I was unimpressed with the over look of the original rear brake master cylinder reservior tank with all it's plastic finishes. The transformation with the simple addition this rear master cap is amazing and I am more then satisfied with the new look. Products to buy together - A product to purchase to add a more attractive appearance to the Monkey 125 cockpit area would have to be a master cap for the front but sadly G-Craft do not have a matching product available but luckly Webike have other silver anodized options to choose from. Difficulty of installation - The installation of the rear master cap is a simple task that took 0.1 an hour to complete. Common sense and the use of your hands is all that is required to screw the cap onto the reservior tank. Cost performance and comparison with other products - I find the cost of all the products G-Craft sell to be on par when compared to what most other companies sell their products for and the rear master cap is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the engine cap, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
The service hole cap offers an attractive yet practical design
About quality and texture - The service hole cap from G-Craft is made from billet aluminum with detailed machining and a silver anodized surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - The service hole cap offers an attractive yet practical design and a simple solution when you are looking for a higher quality part when compared to the original that comes with the Monkey 125. Products to buy together - A key product to purchase to add a more attractive appearance to the Monkey 125 engine is the finned camshaft cover from G-Craft tht adds something real special where needed. Difficulty of installation - The installation of the service hole cap is a simple task that took 0.1 an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to service hole cap to the left crankcase cover. Cost performance and comparison with other products - I find the cost of all the products G-Craft sell to be on par when compared to what most other companies sell their products for and the service hole cap is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the engine cap, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
The engine cap offers an attractive appearance
About quality and texture - The engine cap from G-Craft is made from billet aluminum with detailed machining and a silver anodized surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - The engine cap offers an attractive appearance and a simple solution when you are looking for a higher quality part when compared to the original that comes with the Monkey 125. Products to buy together - A key product to purchase to add a more attractive appearance to the Monkey 125 engine is the clutch cover plate from G-Craft tht adds something real special where needed. Difficulty of installation - The installation of the engine cap is a simple task that took 0.1 an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to engine cap to the left crankcase cover. Cost performance and comparison with other products - I find the cost of all the products G-Craft sell to be on par when compared to what most other companies sell their products for and the engine cap is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the engine cap, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
My friend said I should change it because Parenthesis is bad, so I changed it ?????
I was not so interested in the dress-up because I thought that motorcycles are wonderful vehicles that stimulate our five senses, but my friend said that it would definitely be better for parenthesis if I changed the dress-up. I didn't feel much when I looked at it from the side, but when I looked at it from behind, "Whoa, Parenthesis is good." The slightly thicker MONKEY Rear tire looks good and pretty. View detail
Great item!! Highly recommend
This item is durable and well worth it. The carpet is thick and heavy duty. Perfect to use to display the bike at shows. Really vibrant colors that pop View detail
To CHALY's Custom!
CHALY This is the Rear Sets of the "Rear Sets"! The price is a little high, but the look and performance are perfect! View detail
I made a mistake.
The product is fine. I thought it was well made.
However, I think there is a difficulty in the way the Site is listed.
It will not be attached to the 2023 current MONKEY. I made a mistake.
However, I think it should be clearly indicated that it is not attached to the current MONKEY.
Scroll down and just a little bit at the bottom.
If you write "MONKEY" or "GORILLA", it should be old type MONKEY or MONKEY50 (125cc is not compatible), etc....
If you wanted to write in a clear manner, you could.
Well, I made a mistake and since I opened the package, I can't return it.
Please note that it is not attached to MONKEY125.
View detail