Reviews
It was installed.
There is for MONKEY, but buy futures on suspicion that it will attach to the cheap Swingarm bought with APO at O ??O O
Did. result - - It was OK.. I can not see it combined with another later, I am satisfied.
When tightening Axle, turn around Large by Spanner and scrape the Bolt implanted part gently..
View detail
It's great! I like so much. strong and power for long distance in hometown. Which bike did you attached products to ? Only images customers themselves took can be uploaded. Please be advised not to extract the images from other websites or infringe copyr
It's great! I like so much. strong and power for long distance in hometown. Which bike did you attached products to ? Only images customers themselves took can be uploaded. Please be advised not to extract the images from other websites or infringe copyrights. View detail
If you attach brembo.
I definitely want to add Brembo caliper.
The installation precision was truly GCraft! It was perfectly patchy Pet Tan co with no insanity!
But if you complain about one thing, is the price a little expensive?
There are no complaints if it is about 2000 yen, but is it just as precise as this?
View detail
There are no complaints except price.
I really do not like the iron corner Pipe's design, but the price is somewhat expensive but I bought it! Even if an amateur did it by myself I could do it.
I feel that the movement of Rear is somewhat lighter after installation.
View detail
Parenthesis OK
There is nothing special except Parenthesis.
Since contents can not be confirmed, I do not know the dirt and the amount.
Parenthesis better than practicality Large satisfaction.
Structure is also beautiful.
And I feel a bit expensive.
View detail
It is cheaper than building
Dress-up is the main, but I also expected rigidity Up and bought it.
As a result rigidity Up could not be experienced ^ ^;
Very good construction and tightening appearance.
White Anodized is also good, almost 2 years, almost Blue is almost empty storage, but almost
It is not rusted.
It is somewhat expensive and if you replace only this, it becomes strangely good looking just there,
I think that it is a difficult point to become unbalanced with others.
I want to get other hands and get stuck in a bog in a good way.
View detail
Quality is truly.
I use it for Tank reply Rear master made by Nisshin.
Accuracy, quality is one word of Mr. G Kuru, but the price is - - -. (Bitter smile)
G Kuran We think that you can sell more if you lower the price a little more.
View detail
I broke up and replaced it..
Brake side footpeg breaks ahead when standing up
Because it got it, polish the broken part flat and 6 mm
I installed a hole. Rubber was attached in the past.
However, even with footpeg of Gold genus, it has a slip prevention
The feel was nice..
View detail
Easy Rear Sets
Running Course with Gromm with Number.
If I do not do Race in earnest, I think that this is enough. Easy to earn bank angle.
For those who want more bank angle, we recommend other Rear Sets.
View detail
4MINI
MONKEY Swingarm 16 centimeters wide and changed to 4j foil Tire 130-70-10 so I will issue a Chain line Sprocket spacer 8m I bought it. The Stud Bolt of Normal hub could not be easily removed and it was Large strange. In the manual, it was supposed to be 28 mm, but I was 23 mm and the Sprocket was painful.
View detail
Fits: HONDA NSR50, HONDA NSR80
I like appearance
I decided to attach a Reserve tank-less kit to the Master cylinder of NSR 50.
It looked good, I cut Screw neatly and making it was very good.
It is regrettable to add Fluid.
In the Instruction Manual, it is stated that putting 20 mm Scale and inserting it to the extent that 10 mm Fluid will adhere.
In other words, it will say that you put Fluid up to the part of 10 mm from the upper end face of Body.
If possible, you can easily understand if you can put a line inside with Laser etc. I would like it to do so.
Is only me thinking that it is usually high - - - ?
View detail
The first Rear Sets
I installed it on MONKEY 8 Inch.
Because it was the first Rear Sets I was worried about installation but somehow installed successfully.
I think that it is beautifully made as a thing of making things.
3-position Yes Since angles can also be changed, there is also a sense of virtue.
What I'm interested in is footpeg's Length, which is about Length, but it's normal KICKBracket to definitely interfere with footpeg when kicking it off.
Therefore, KITACO's KICK is also recommended for Manufacturer's explanation.
That will cost extra Gold - - -.
3-position, but in my case I installed the Up type muffler, and if I set it to the highest position, that head of the Master cylinder Banjo bolt will interfere with the Exhaust System so I can not use that position - - - -.
Another disappointing thing is that handling Instruction Manual is hard to see.
I think that you will come up with an interesting part, so let's ask Manufacturer. I think that you are being questioned every time because I was able to understand just by talking a little.
The foot comfort is quite good, I still can not find the best position but I will try various things.
View detail
3. Required for 5J
This bub is mandatory if you are going to consolidate with GCraft.
Usually with Size's Swingarm 3. Enable 5J.
Making is also firmer than I thought, there are also not bad.
The only complaint is that the instruction manual is unkind.
There is not a detailed explanation to some extent after writing the assembly drawing.
There was also a part that I added by handwriting etc,
I thought that I used the drawing of the internal document as it was for explanation.
There is nothing particularly difficult as there are not any difficulties though.
At the very least you should tighten Torque etc. I would like to mention that part.
View detail
Very good!
It is installed at the same time as 32076 5 Lfor MONKEYGrab Bar, it is easy to install and it is a level that you can understand without the Instruction Manual.
As expected it is well made of GCraft distortion firmly!
Personally discontented is that the Coupler of the Tail lamp did not go straight to the hole to be wired under Bracket.
View detail
Fits: HONDA etc, HONDA GORILLA, HONDA MONKEY
Main key relocation
As a result of Headlight exchange, Main key was relocated. Large I am very satisfied with the stamp of gCraft with beautiful goods! For mounting holes m6
The installation position will be limited.
View detail
It is high quality.
It is Parts irrespective of the speed and operability of Motorcycle.
◎ Merit
Hose sorts are omitted and it becomes Simple,
It will be very cool.
Access for Brake fluid replacement and replenishment
It will be easy. (NORMAL is Seat lower part)
◎ Demerit
I can not see the amount of Brake fluid. But,
I can not see even NORMAL items at the bottom of Seat
It may be the same thing.
It is a high Parts to buy though it's not a breakdown.
Is it Aluminum Cut-out?, Actually wear it
I was surprised by the high precision.
Turning around Cap will move comfortably with the thrill.
When inserting into the Master cylinder, the dimensions are tight
It was hard to fit because it was too much troublesome.
When exchanging, Footpeg Holder's 12 mmBolt
Quantity : Remove 2 pc and float with Holder.
Just so that the Sub tank mounting section is right above
If you remove the Master cylinder by tilting it, air
I almost did not bite it.
Because it is an important security part, of course air bleeding is carried out
Did.
Since the Sub tank is in front of you even when removing air
Workability was wonderful.
It is expensive, but I think it was a very good part.
However, we need OEMParts separately prepared to be included in the product
I think that it was okay not to take trouble if you could do it.
View detail
Exactly to fix Reserve tank
I was worrying about installing OHLINS's Reserve tank, and found this product and purchased it immediately.
Because it is made firmly, Cushion's Rubber is also attached, so the Reserve tank is not scratched.
In FJ, since there was no Screw hole in Resolution Tank Bracket attached to Frame, I created and installed Bracket by myself.
View detail
It is quite Parenthesis nice.
Instruction Manual is easy to understand, intensity seems to be problematic.
Because Tail light faces upwards, I recommend it because it can be a Fender Eliminator at a low price for those who can tolerate that point.
View detail
Fits: HONDA NSR50, HONDA NSR80
angle
For this product, Rear master for NSR 50, Master cylinder mount kit for 32048 APE, Tank and the ground will be horizontal. There may be individual differences. But since G-Kuran-san has issued various angle reserve tank-less kit, it is better to purchase after checking compatibility.
View detail
GCraft Aluminum Stand
It is for APE but installed in GROM. It is convenient because you can adjust Length. Just because GROM is heavier than other 4 mini, the tip is small, so it is a little unstable so I think I need attention when I can stop. View detail