Reviews
Just like the name of the product.
The feeling of Shift change after the oil change continues.
I'm glad I put it on.
I wish the price was a little lower.
But if you're a Grom rider, I highly recommend you get one.
View detail
Expensive but good construction
The price is very expensive because of Mr. gCraft's product, but it's very well made. I think the yd24 made its presence felt when I put up the STAND by making the
Pricey, but good product! No regrets!
View detail
A little bit of Shift action with Snap.
I'm using it for my wife GROM.
Looking at other people's reviews, is it a preexisting condition of GROM that makes it difficult to get into Neutral? I bought it because I thought it would work for
The accuracy and appearance of the parts is perfect.
As far as installation is concerned, it is challenging.
First of all, you need to remove the OEM Shift lever, and to do so, you need to remove the footpegs (= pivot shaft).
Removing this will make the installation process easier, but after this process, the Swing Armetc. will be installed in a Large size.
I loosened the Screw until before the pivot shaft slipped out and made the space where I can work on the removal of the Shift lever by rotating the footpeg around the shaft.
This method requires some work to install the Shift guide and Shift lever, but if you think about the removal of the work around the rear, you can reduce the work time to a large width.
Try it at your own risk.
After installing it, the feeling changes from a squishy feeling to a little snappy fee ring.
It's not a race that uses a lot of high rpm range, but in daily use, shift mistakes, etc. rarely happen, so it may be just a pleasant feeling of Parts.
There was little change in the difficulty of getting into Neutral.
I would have been happy to see a few more changes for the price.
View detail
Parenthesis is good
It is lighter than OEM parts. The shape of this part is good for parenthesis, and the red metal lick gives it a flickering effect and makes it more stylish.
It's said that dressing up starts at your feet.
View detail
How to remove the lock from the existing location The bolt is unable to turn View detail
Fits: Others Regular head of each company, HONDA MONKEY, HONDA DAX, Others for Horizontal Type Engine, HONDA MONKEY, HONDA MONKEY R, HONDA DAX
The looks have improved.
It became cooler as there was no hose, but it was not easy to remove and install the Spark plug. There is nothing more to say except that the T-type plug wrench does not fit anymore. View detail
I wish I'd bought it sooner
I used to use the OEM STAND, but the height of the car changed slightly by extending the swing arm and replacing the Rear Suspension and replacing the tires, and the body of the car was collapsing and waking up too much. Once I put a STAND that was a little shorter than OEM, but the body collapsed too much and I had to return to OEM after all. But when the car was too much, it was difficult to get it to fall down with the slightest tilt of the ground.
I've always wanted this product, but I was hesitant to buy it because of the delivery time and the high price. However, when I inquired, I found that the delivery time seemed to come in sooner than advertised and I thought it would be more expensive after it collapsed, so I took the plunge and bought it.
The result of the purchase is Large satisfaction. The length can be finely adjusted, so I don't have to worry about customizing it in the future. I should have bought it earlier.
STAND is Material:Because it is aluminum, the powder of aluminum falls on the place where it is placed, but I don't care about it.
View detail
Fits: HONDA MONKEY, HONDA GORILLA
The mounting holes were severe.
I changed to 5cm Long Swing Arm and I needed to relocate the Fender as well, so I bought this one.
Although the part itself is a simple form, the mounting hole Pitch of Frame is too Exactly and Bolt does not fit, so I widened the hole and installed it. It would have been better if one of the holes could be used for adjustment.
Also, you can't use the tools on the Bolt to mount the Bracket with the Tire, so it's faster to remove the Tire from the beginning to make room for the tools.
Considering the color of the surrounding parts, I applied Black paint, Gold paint and Carbon Seat.
View detail
I'm glad I bought it
It is solid for the price and I thought about making my own, but I'm glad I bought it.
The Fender's deviation from the Swing Arm is 10? Balance is better (the second photo is after installation).
View detail
Only for people who don't run in the rain.
It's smaller than I imagined. It is thought that the role of the Fender is hardly fulfilled. I think that the appearance is good in Down fender installation. It is regrettable that the price is high for FRP. View detail
It is good
If the inner diameter is 12mm, the outer diameter is 12mm I'm grateful for this 25mm outer diameter product as I can only choose up to 22mm However, since the thickness is only 0.5?mm, it would be nice if you could set the thickness to 0.2?mm The ticks are too coarse for adjustment View detail
Making is very good
I bought them when I redesigned the suspension, and I used G-Craft 3.5J front wheels So I went with the same Manufacturer
The construction is very good It has thickness and the pattern of Carbon is beautiful and I can feel a sense of luxury though it is a small part It's very well made and as expected of G-Craft I didn't think it was important, but when you actually run it, the dirt will hit the Engine and The puddle jumps up the water, so it's not much different than what you'd expect, or not wearing it I prioritized looks, but I wouldn't recommend it for those who also want function
The other thing is that the price is a bit high, I think it's Carbon so it's inevitable, but it's a bit less expensive I'd be happy with the setting of
View detail
Fatty acids are replaced by MOTO!
Front offset sprocket device for the rear hub 5mm spacers Installed A reliable manufacturer's product I can use it for a while View detail
I'm satisfied!
offsetting from the Shift shaft after installing the rear sets made over I was not satisfied with the Shift feeling, so I bought and installed it, but Shift I feel better
I'm happy to be tightly more than a NORMAL state!
View detail
Firmly, you're still Firmly?
Did you install this in conjunction with the introduction of Rear Sets? Clearly, the Shift setting goes in tightly? Does the neutral also come out soon? There's nothing but good things about it (* 'Ω `*) Is the texture satisfactory? The downside is that it's a bit expensive (´・ω・`) For those who have Rear Sets, do you often recommend them? View detail
Neutral Radical Change
Neutral comes out almost 100% at the time of Up and Down It is a perfect score except that the price is a little bit high because GEAR is entered with a good, tight small feeling View detail
If only it were less expensive
It's not noticeable once you put it on, but it's nice to know that you won't get frustrated with the Wheel on and off W
I just wish the price was a little lower
View detail
Snap in
Z125pro's GEARPedal, which allows you to enter the car when it's stopped with a ka-chica chica
When you start driving, it feels like a worn-out learner, and you can get into the car with a good feeling (after the -te form of a verb) not ..
But now that they've reinforced it with these, Pushing Yah, Pushing Yah! And he's now comfortable with the idea of coming in
However, the cost of the main components is fundamentally different, so the cost is not as high as that of the Large models, so it is not excessive Don't expect anything less
It's just a matter of how you like or dislike the feel of it, and it's not something that will particularly increase your power or speed, so it's suitable for everyone It's hard to say
Try this on if you don't like it The degree of recommendation is about
View detail
I guess it's worth the price
The one I used to use broke off over time, so I chose the one made by GCraft, which is supposed to be better made
I thought it was cheap, but that's about it, it was cheap, so I had no choice
View detail
Too bad about the packaging!
The moment I got it in my hand and opened it Hmm? It was
The packing material is just wrapped around the Frame It was out of Frame
The Bolt part of the Frame to receive rear shock? The ball is designed to ground directly to the bottom of the ball, and if you want, you can turn the ball into a Penetrating
When the box was placed on the floor, the impact and load seemed to be thumping against the Frame and Bolt parts
Is this the kind of packaging on the Manufacturer's side, or are the packers terrible?
When I traded second-hand goods between individuals in certain auction sites, I didn't see many items that came with such terrible packaging It is not
It's not a cheap purchase, and it's a quality control thing, so you want to make sure it's done right It is
View detail