Reviews
GCraft Caliper support
Purchase to install Brembo caliper. Selected domestic GCraft which can be trusted because it is a suspension part. Construction is also beautiful and can be installed securely. View detail
Convenient.
When you arrive at Rear Sets on GROM OEMReserve tank and Master cylinder will be apart and Hose will be longer and it looks like it is not too big, but looking after installing this Reserve tank is also a Good Parenthesis Recommendation. View detail
GCraft Rear Sets
Position is too early in OEMfootpeg so purchase GCraft's Rear Setsfootpeg. Rear Sets But it is easy to get on because it does not become cramped. Easy to install because it can be installed with no processing. View detail
Fits: HONDA NSR50, HONDA NSR80
angle
For this product, Rear master for NSR 50, Master cylinder mount kit for 32048 APE, Tank and the ground will be horizontal. There may be individual differences. But since G-Kuran-san has issued various angle reserve tank-less kit, it is better to purchase after checking compatibility.
View detail
GCraft Aluminum Stand
It is for APE but installed in GROM. It is convenient because you can adjust Length. Just because GROM is heavier than other 4 mini, the tip is small, so it is a little unstable so I think I need attention when I can stop. View detail
If we can compromise even the price.
In addition to this Kit, Steering damper Clamp is necessary.
I purchased Hyper pro as Manufacturer recommended but total is over 50000 yen.
This Bracket itself comes with very accurate tightly.
Neck is still a price.
View detail
Spring is hard to apply
Although it is meant for Grom, the position to put Spring is about 1 cm longer than the STAND of NORMAL, and I had a hard time putting on Spring.
If you sing it as a special item you want to match the position of Spring hook to NORMAL or include a corresponding Spring.
The price is also high.
View detail
As expected
I think it is as expected.
Originally it was Bore up using OEMHead, so the heat became easier to stay, but it felt like something if I got a break even if the temperature rose. It's air-cooled and CUB's Leg shield is listening or running No problem. I thought about purchasing this item whether it can not prevent the heat source of Head. Oil temperature drops even if Oil pump is replaced and cooler is attached, but Head temperature does not change so much. If you think about winding up Crankshaft, how about Orifice Expansion Large. Even if you enlarge Large and take countermeasures to prevent galling of Cam, it will cost you more to Crank.
Since this item is directly attached to Head, it feels like heat conduction and radioactivity are good. The drop in oil temperature is about 5 ℃, but the MJ has fallen. It is speculated that Gasoline to be cooled will have decreased by the reduced amount. I felt it was amazing to know the change. I requested the resurrection of the Billet cam cover.
View detail
I got a Steering damper
Even if you ride a Motorcycle with Steering damper at least once
It is people's feeling that I want to attach it in original Chari, too,
But in the case of Grom, every Manufacturer also has Bracket
I do not have anything to put out, I made it my own universal product
I installed it with Bracket. (Photo)
Exclusive Bracket will be released from Mr. GCraft this time
As soon I tried to punch it.
Damper diverted from being at home
When I install it, it is cute, is not it
Are you!
As expected, Guran san will do it.
I forced it so far, so Handlebar Lock
I could not do it, but I can do it properly
I am happy that it came to be.
Also, in addition to Damper, Active Clamp
Because it becomes necessary, it is painful to spend expenses.
View detail
Standard Side Cover Right Side Mounting Bracket
I purchased Cover for MONKEYRight Side in order to install it. There is nothing to say if it is a bit cheaper.
When it rained, the surface became textured as if the powder blew. If you scrub it with Compound, it will become beautiful as it is, but it seems better not to get it wet too much.
View detail
Be attacked, Tandem can do it, cheaply Rear Sets!
I want to attack at the pass, I want to Tandem, I want to Rear Sets cheaply, so I made this item. Installation is a way to remove Swingarm, so it will be a hard time.. GROM will do so even if you can add any Rear Sets. Height is 165 cm. One position, but Position is satisfied.
NORMAL was too low, it was frustrating, so you can earn a little more bank angle. The drawback is that since Plate is inserted in Normal step, Quantity of footpeg : Pair (for Left and Right) It widens to. Although there is no problem, I think that it can be convinced by ___ _.
View detail
Finally I could see it.
MONKEYRear sticking to Normal step with disk formation.
If it is Rear Sets, you can choose from a lot of items, but in Normal step, there are various restrictions, there was no item of your choice in there.
This product can be installed if it is Normal frame regardless of the shape of Clutch cover.
As expected the Drum brake and the different disc brake work well.
It's comfortable without being tired at Normal position to PetitTouring with friends.
View detail
I Bought the G-CRAFT master cylinder mount kit 2 for my brake disc conversion. The quality was great and was fitted perfectly. Since i use Yoshimura cyclone (sidewinder) exuast, the normal rear master cylinder won't fit. G-CRAFT is an highly recommended b
I Bought the G-CRAFT master cylinder mount kit 2 for my brake disc conversion. The quality was great and was fitted perfectly. Since i use Yoshimura cyclone (sidewinder) exuast, the normal rear master cylinder won't fit. G-CRAFT is an highly recommended brand well crafted and design was superb. View detail
Fits: Others Rear master made by Nisshin
Welcome to RearWheel
I purchased it at the same time as Futonto, I think that there is no way to have one side well (; ^ Ω ^)
It is recommended for RearWheel, Rear has Chain and Rear caliper, so if you exchange for it you can work Smooth.
View detail
Fits: Others Rear master made by Nisshin
Friction alleviation and color fall prevention
Wheel When desorbing Color is not frustrating and it is irritated, those who are already out of Seal and those of the future too will be released from such frustration, installation removed Wheel Dust Seal with Slotted screwdriver Just replacing it, I think that the price is a bit expensive, but Repair Parts also comes out so there is safe in the Manufacturer that was cool and cool.
View detail
Fits: HONDA APE 50, HONDA XR100MOTARD, HONDA APE 100, HONDA XR50 MOTARD
Black Material : Exchange from Plastic Cover
I did not like too much cheapness of OEM Parts Number and exchanged. I got lost as other Manufacturer, but as expected, GCraft, Design is well made well to the details. View detail
Diversion to other cars
The accuracy and shape of the product is good and looks good.
It is a convincing item for price.
This time, I diverted it to GTX 125 of CPI company and installed it, but it was not attached easily even if the installation pitch was 45 mm and same. Because considerable processing was necessary, diverting to GTX 125 is not recommended for other people.
However, compared with NORMAL, the effectiveness of Crab caliper and Touch became able to run wonderfully and reliably. I am satisfied myself.
View detail
Mounting on Grom
I arrived, I installed it immediately
What is it? - - - Rumor is going to be Cha Chi Chi
It is rather good to say that Kore is OEM
Is not it the thing that should be attached at the very beginning in Grom?
I did not think that it was good so far.
View detail
To you who wants to change the Riding position
We also combined Rear Sets as Ronzui is made by G-Craft.
Although it looks nice, it was easy to install with precision as well. The Master cylinder needs to be devised for handling, such as rotating by 180 ° from OEM orientation.
Also, if you do not adjust BrakeLightSW, it will also be lit or unlit.
Although I tried on test after installation, Position got used soon without being bitter.
I think whether I will lose it by buying it.
View detail
Effective when attached at the same time as back step - - -
Simultaneous purchase in accordance with G-Craft's Rear Sets installation.
Easy installation!
Compared to NORMAL, Shift feel improved and it became easier to place it in the Neutral position, but I do not know whether this part is good or not.
I am satisfied because the appearance has also improved.
View detail