Reviews
Does not fit 2022 monkey
should have asked before but this will not fit on a 2022 Honda Monkey Quality item tho. its built solid and is very good craftsmanship. I will have to build some brackets for it. View detail
It would be better if the load capacity was a little higher.
The Endurance Rear Carrier was sold out, so I bought this one.
Installation was very easy.
The load capacity of this product is 3kg, but I usually use it with a 3.8kg top case on it.
So far I haven't had any problems with it being overloaded, but it does make me a little nervous when I'm on a long distance tour…
By the way, when you install the UniversalBase of GIVI's Top case, you can install it in the Center part of the carrier.
Note that when you try to remove the Seat from the car body, it will interfere with the Base and you will not be able to remove it.
We recommend that you install it as far back in the carrier as possible. (However, the center of gravity will be more rearward, so the load on the carrier will be higher, but…)
View detail
G-Craft axle collar black
Since the shaft seals started to whistle on my motorcycle from approx. 85 km / h I had to remove the brow, which was supposed to simplify the assembly, on the lathe. I had the problem on the front axle of a Honda Monkey and a Honda MSX / Grom. View detail
G-Craft axle adapter for GROM
Since the shaft seals started to whistle on my motorcycle from approx. 85 km / h I had to remove the brow, which was supposed to simplify the assembly, on the lathe. I had the problem on the front axle of a Honda Monkey and a Honda MSX / Grom. View detail
Change the appearance of Stop-lamp
Stop-lamp Design.
I bought it to change it.
I'm happy with the way it looks, but...
I have a Carrier installed.
The more you can hide with the cover, the more you can get from Truck.
Is the view to the rear Large sturdy?
I'm a little nervous.
View detail
Quality is good
I've heard a lot of rave reviews from other people, but I'm a slow learner and I couldn't feel any of the effects.
However, considering the strain on the Shaft of the Shift Pedal and the structure beyond, there is a Merit that allows you to kick the Shift Pedal off comfortably.
You will of course need to remove the Shift Pedal to install, but it is part of the Review You don't have to remove the footpeg. It was not.
Minus1 of the texture is that there is no Shield on the Engine side of the Bearing.
I applied Grease and then installed it.
View detail
I installed it because I didn't like the flat look of it, but...
I was concerned about the OEM flat design so I went with this product with fins.
I'm satisfied with the shape of the Large, but the color is quite different from the Engine, so the appearance is floating.
I don't know about the effects lol.
I think it has some cooling effect because it has fins.
View detail
It was a Type with a linear shape.
In the product photo, there are two types of fins, one is straight and a little bit rugged shape, and the other is fashion one which has R on the whole.
The CAD-like diagram has an R on it, so it's probably a product improvement or something, and the current lot has a Type with an R.
I was vaguely wondering if it would come, but the product with the straighter shape came. In the instruction manual attached to the product, it is shown that it has R
I don't know what it is, it's got a picture of a shape on it. (Purchased on Webike in June 2021)
I don't know if the product photos are wrong or if it's a dark pot as to which lot is coming, but the curve FashionType.
If you're expecting to get one, be careful. It's basically Dress-up parts and I'm not sure about this…
The finish of the object itself is beautiful.
The OEM Cover is painted silver gray, so the color is slightly different, but it has a custom look.
There is no rib or anything in the oil pool behind the cover, so it's a comforting measure against oil temperature.
View detail
Fits: HONDA GORILLA, HONDA MONKEY
It'll look better.
For the makeover of 5LMONKEY, I installed Boots along with Front fork spring replacement.
It was easy to install because it was a part of the Spring replacement, but if you want to Rose the Front fork for this part only, it is Large strange, so if you want to Rose it anyway, I recommend you to strengthen the Spring and Overhaul at the same time.
I used OEM Product for Boots, but since I made it 15mmLowdown, Bellows becomes a little painful, but it is acceptable.
The Boots color is G-Craft, the precision and quality is perfect and it fits the 5LOEMFork perfectly.
The Screw juts out less than 1mm when tightened, so I sought a position that would make it less noticeable, about 45 degrees from facing inward to the second half of the vehicle.
However, I had a hard time with this Screw.
I fix it with screw of M3×3mm, but when it becomes overtorque, I blame the thread, and when I tighten it a little weakly, it comes off while running, and I don't want to use screw lock because the diameter is small, and the tightening condition is difficult.
I am Quantity:Pair (for Left and Right) I had to buy it again at Home center. The screw is protruding, so it becomes a wrinkle by all means, but I made this measure because it is a place that cannot be seen without looking into.
If the Screw comes off, the parts won't fall off, but the collar can damage the paint on the Fork, so it's best to do something about it from the start.
View detail
Feel a little bad
Before purchasing this triangle assembly kit, I looked for a large number of products of the same type, but unfortunately the products of other brands have been discontinued, and the products of other brands are not beautiful. In the end, I can only choose the products of the G craft brand. In terms of the first disadvantage, there is no color to choose from, the second is a bit monotonous, and the rest is only hoped for its durability. View detail
A pity
Basically, many players who play 4 mini bike on G craft’s products are familiar with them, but they are more expensive than the products of this brand. They are based on the products in the picture, except that there is no color to choose from and no screws are included. , It's a pity for me View detail
Feel normal
Because many of the related parts of xr motard have been discontinued, so there are not many related products to choose from, but relatively speaking, I think it is relatively expensive View detail
The letters GCraft give it a custom feel
I installed a 20mm Spacer to make the position easier to ride without destroying the style.
It's a perfect position, and it's easy to drive and doesn't hurt your hands.
View detail
Recommendation
I don't plan to put any packages or boxes on it, but it looks cool, so I installed it
If you do a cover on the reverse side, it will be a simple Fender and a mud splash measure.
View detail
I installed a Gcraft Fender Eliminator Kit.
Compared to other Manufacturer's products, the price is higher, but the product is better made for it.
I think it will be finished in a very slim and integrated rear view because it has Bracket of the reverse side part with a high-class feeling and LED License Plate Lamp and Reflector attached exclusively.
View detail
Pricey, but well made.
You have to put your fingers in a very narrow space to install it, which is not a smooth job, but it was not so difficult.
I was very particular about not wanting to put a carrier on my rear and was looking for a carrier that would allow me to carry my Rain Coat and tools when touring and I found this product.
The product is well made and satisfactory.
But the price is high, as is the case with Motorcycle Parts in general. That's the only disadvantage.
View detail
After some DIY, I managed to get a piece of the action, but
Previously on & omega;
It's too good to throw away, so do-it-yourself measures
The rattling thing is a recessed OEMSTAND 12.4mm wide. This one is 12.5mm wide.
So we ordered Stainless Shim inner diameter 12mm, outer diameter 22mm, and thickness 0.1mm.
Bite into this stuff and it's perfect.
I ordered 0.05mm, 0.02mm and 0.01mm just to be sure, but they're out of stock & omega;
Also, you should definitely have a spring hook.
Even a cheap one is enough for me, so I'll keep it & omega;
It's a full-powered tool and I'm afraid of substitutions.
STANDBolt/Nut is 14mm/14mm
Side stands sensor fixed bolt is 8mm
Too short All Screw, Order M12/P1.75 inch cut Stainless bolt 110mm for extension
The Uniqlo length NutM12/L60 on this one.
I couldn't find a good one around L60 in Stainless Steel length Nut, so I used Uniqlo ω
Also, the M12Stainless Nut 3 different thin 1Pack
The rest of it will be on the rubber board for about 1,000 years. It's a useless cost, but it's unavoidable.
I decided to temporarily connect them with a long nut for 30mm each, and then fill up the all screw of the body with 30-35mm
I used a disk grinder to cut it down to 32mm.
It's adjustable, so just use About.
Then, put two nuts in the bolt for the double nut, put the body cut with a long nut and tighten it up.
Also, the angle of the STAND toe is poor, and it's only grounded on the inside of the STAND only.
So I put it on the Rubber Board Teketo and it's done
Well, I've managed the Large goal of somehow improving my over-sleeping OEMSide Stand.
I'm not happy with some of the details, but it's good because we achieved the minimum objective.
Just not for people who can't do DIY;
View detail
subtle
When I started riding the MONKEY125, I found it particularly difficult to get into Neutral.
I bought it to see if I could get rid of the problem a little, but the neutral is not needed from the 1st gear and the entry from the 2nd gear is better.
Don't expect too much from this product.
View detail
Shift feel is certainly an improvement!
Shift feel is certainly improved and crisper
But it doesn't change the ease of getting into Neutral, which I was expecting
It's a slight improvement … that's about it
Perhaps there are some individual differences, but in our case, we started out riding with ScauperScauperN It does go in, but after 30 minutes of riding, it's hard to get in That situation may have improved slightly … that's about it
Well, it's a symptom that seems to work better with Oil replacement or something like that …
If you put too much Oil in, the entire Shift will be a mess from the start, so Oil heats up Does it get a bit chunky when you start going around? If that's the case, it may be an improvement depending on the type of Oil …
View detail
Shift change doesn't feel as good as I thought it would
Shift change from Low to Second and Neutral just before stopping is nowhere near enough
I thought it would feel a little more like ScauperScauper, but I hoped it would feel better but
It seems to have been Large
View detail