Reviews
Gcraft
There are only 2 sizes available for this sticker. Bought this for 2nd time. My bike already full of stickers so I stick it on my car windscreen. Looks unique. View detail
Mini stickers
Quality of the stickers are good and just nice for the size. As usual, such small items can be shipped by small packaging to save costs instead of the standard box unless you buy few items together. View detail
just to be sure
I tried driving with it installed but did not feel it that much.
I feel that the Brushbo effect has changed things a little bit so that I can get a little bit of Kachica.
I think the rest will be good for the protection of Engine in the long run.
View detail
Shift feeling is better.
It was easy to install and the shift feeling was not bad before installation, but after installation, it is tightly increased and I can shift quite comfortably. View detail
Improved Impact around Rear
I replaced the cheapo OEMSprocket with a replacement made by GCraft.
Installation was a little tricky. After removing the Wheel, I tried to loosen the Bolt to remove the Sprocket.
The Bush in the Wheel pops out, so the Breaker bar on top of the Tire
I removed it in
As usual, it is tightened with a ridiculous Torque, so be careful.
After installation, the gold color looks great.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY R, Others Regular head of each company, Others for Horizontal Type Engine, HONDA DAX, HONDA DAX
G Craft makes good oil coolers.
The G Craft billet oil cooler fit my 1969 z50a Monkey perfectly. The spark plug boot is a close fit but it does go on. The bike looks good with it and i dont need a cooler hanging off the frame somewhere. I have stroker flywheels and a big bore kit with a race head. View detail
Convenient for relocation of Horn.
I bought a Horn Bracket because I could not attach the Other Brand Product's Horn to the Other Brand Product's Stem without interference.
It provides freedom and a clean look.
View detail
Fits: HONDA XR50 MOTARD, HONDA XR100MOTARD, HONDA NSR50, HONDA NSR100, HONDA NSF100
Aluminum Billet master end
I have a collection of G−CRAFT around the Rear master. View detail
G-Craft Shift Guide Type 2.
Beautifully made would look nice on my mantlepiece actually, although the fitting instructions were in Japanese the illustrations were easy to follow,from start to finish the fitting took 15 minutes.There was an immediate difference felt from the start the shift into first was positive and smooth unlike the original slightly vague and notchy feel in all gears a definite improvement so all in all well recommended and 5 stars. View detail
G-Craft Reserve Tank-Less Kit Type 3
About quality and texture Good design and quality About the feeling of use The components were chosen to fit the ape 100 really well Products to buy together 45518-GM9-711 45520-GM9-711 Difficulty of installation easy Cost performance and comparison with other products be better than the standard About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing When thinking about the rear brake oil reservoir holder in the process of converting to an ape100 disk, this product can be used better and the design is cool View detail
Perfect
I ordered it to change from an unnamed Chinese product to this product. It will be installed on the Monkey 125. It will be easy to mount. I checked that the Monkey cable can be installed up to 30mm up size and changed it from the existing 20mm up. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY
Recommended products
It was used during Conversion to 12v.
Material:Aluminum and lightweight w
I bought it because I wanted to be concerned about what I couldn't see.
I like it, although I am disappointed that it is not engraved with GCraft.
The particularity is that you can see a little when you look into it.
The glimpse is intriguing.
View detail
Quite a bit, it changes!
This product has changed my Shift feel quite a bit!
In addition, the difficulty of entering N (Neutral), which is peculiar to groms, has been considerably improved.
Thanks to this product, daily driving has become easier, and I think it is a very good product.
View detail
It improved gear changing of the bike!
About quality and texture: The product is made of aluminium allow, and is beautifully made. Didnt expect it too have that level of quality for a (relatively) simple part. The brand is also etched on the body and is visible from the side, even after instalation. About the feeling of use: It improved the snappiness of gear changing. Products to buy together: There is no need to buy any other product as it comes with all neccesary nuts and bolts. Difficulty of installation: Very easy, even for me, a diy home mechanic. Cost performance and comparison with other products: It is relatively expensive when considering the simplicity of the design, but the level of build quality is apparent. So I guess you get what you pay for. About shipping and packaging: As usual from Webike and Japan, packaging was top notch and delivery was quick. Any concerns, cautions, or advice when purchasing: None. View detail
A Great Way to Dress Up the Rearsets on the Monkey
About quality and texture: I am happy with the quality of heel plates from G-Craft. Made from aluminium with a polished finish. About the feeling of use: The polished finish looks great alongside the Honda chrome parts and aftermarket polished parts I have added to the Monkey. Products to buy together: The machined aluminium rear brake reservoir cap from G-Craft would also be desirable to purchase alongside the heel plates for a high quality look. Difficulty of installation: The process to install takes about 20 minutes, wipe down the rearsets at the heel area with rubbing alcohol and secure the heel plates with double sided tape. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting a product made from a quality aluminium material wth a finish that has to be the most suited to the retro styling of the Monkey as compared to the cheaper silver and black finishes from the Kitaco heel plate set. About shipping and packaging: Sea freight was my preferred method of shipping due to the lower cost but currently unavailable due to Japan Post. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: These heel plate options from both G-Craft and Kitaco are a great and affordable way to dress up your rearsets with worn black paint. View detail
Great Way to Dress Up the Rearsets on the Monkey
About quality and texture: I am happy with the quality of heel plates from G-Craft. Made from aluminium with a polished finish. About the feeling of use: The polished finish looks great alongside the Honda chrome parts and aftermarket polished parts I have added to the Monkey. Products to buy together: The machined aluminium rear brake reservoir cap from G-Craft would also be desirable to purchase alongside the heel plates for a high quality look. Difficulty of installation: The process to install takes about 20 minutes, wipe down the rearsets at the heel area with rubbing alcohol and secure the heel plates with double sided tape. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting a product made from a quality aluminium material wth a finish that has to be the most suited to the retro styling of the Monkey as compared to the cheaper silver and black finishes from the Kitaco heel plate set. About shipping and packaging: Sea freight was my preferred method of shipping due to the lower cost but currently unavailable due to Japan Post. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: These heel plate options from both G-Craft and Kitaco are a great and affordable way to dress up your rearsets with worn black paint. View detail
It can give you a classic feeling
It can give the impression of a subtle classic engine head that does not stand out. There are many covers of colorful cnc, but if you want a subtle feeling, this is the best. View detail
Classic Simple
It doesn't fit JB03. It was marked as suitable for all monkeys, so I ordered it and got a refund You must purchase a round-shaped JB03 exclusive Tappet Fin Cover. View detail
Smoother shift
At first I'm not really sure how this thing works. Before installing, I noticed there're some free play on the shift shaft. After installing it there's no more free play and gear shifting is much smoother. View detail
Design is good and fits the 92 Grom well
I've been curious about this for a while at last week's WeBigSale.
Gcraft's Rear carrier was very cheap.
Purchased
Installation is easy and takes only 10 minutes with a single Hexagonal Wrench.
I believe it will be completed.
It's a low-capacity Grom, but now the Seat bag can be used.
It looks like it can be installed.
View detail