Reviews
Beautiful Processing Technology
Quintessential gCraft's Parts
Anyway, it is well made.
There are many manufacturers of MONKEY parts, but gCraft's parts are beautifully made.
(Just my personal opinion.)
View detail
Light weight and accuracy is not bad.
Although it is obviously lighter than Steel, its strength is not a problem. When adjusting the split wheel, the Quantity:Pair (for Left and Right) If you set the center of the wheel of the "1" firmly, there will be almost no blurring. It's a pity that the Black color variation is no longer available, but I hope you will re-release it. View detail
Fits: HONDA CHALY series 10InchWide wheel (2.75J), HONDA CHALY series 10InchWide wheel (3.5J), HONDA CHALY series 10InchWide wheel (4.0D), HONDA CHALY series 10InchWide wheel (5.5J), HONDA DAX
Functionality is fine.
Purchased for use with Split Wheel. If you are not adventurous, you can use GCraft to put together the hub, Wheel, and Spacer. It says "Spacer" but it is not to be inserted in the Wheel. View detail
Fits: HONDA GORILLA, HONDA MONKEY, HONDA R&P, HONDA MOTRA
For Custom
Purchased for a custom order. The OEM was rusting and the steel was thinning, so I feel more secure in the strength of the product. View detail
Fits: HONDA GORILLA, HONDA MONKEY
GCraft8InchWide wheel Introduction Kit
I had a lot of worries, but I decided to go with GCraft because of their brand power.
B77 is the most Fashionable Tire for MONKEY.
We will now assemble and install it.
View detail
Fits: HONDA GORILLA, HONDA MONKEY
Essential Items of Thickening
Quantity of G-Craft pre-3.5J post-4.0J initially:I used Set, but it became insufficient with 3.5J of Front, and I changed to 4.0J of the most LargeSize which can be used for OEMFront fork.
The gap between the wheel and the front fork becomes severe because the tire is pulled a little though the gap can be taken enough.
Tire outer diameter is 380mm for 3.5J and 375mm for 4.0J by actual measurement, and the outer diameter becomes small for a little bit of tension, but because it is 2.5mm difference in ride height, there is almost no difference in ride height.
I use a 1mm Spacer to see the gap and Quantity:Pair (for Left and Right) I adjust the gap between the Boots at about 2mm (so that the Mustache of the Tire touches a little).
The front fork spring has been strengthened with Moldy's Reinforcement Spring 15mmDown, so there is no interference in that gap.
The photo shows 15mm down, please note that the gap will change if you change the OEM length or further lower.
However, the gap is very small, so it may interfere with the Tire, Fork Spring, and individual differences, so you need to be careful.
The quality is as expected from G-Craft. Accuracy and quality are perfect.
However, there was a design change, or the logo of G-Craft was changed to White color, and because it stands out with Black wheel, it was good to keep it from the previous design.
I also have a Rear 4.0J, but it's the old Design Black color Logo, so it looks a little different before and after.
If you are planning to buy one, please refer to this page.
The Black Anodized Specification is going to be discontinued soon, so if you are interested in it, please place your order as soon as possible.
View detail
In the meantime, I'll replace it.
You should replace it when you think about the OEM Colors that fall out of polo.
Because the painting of the color was shaved off, I bought it again because the squeak sound occurred because I inserted it into the Dust Seal at an angle just a little bit, and the paint of the color was shaved off.
View detail
Parenthesis is good
It is lighter than OEM parts. The shape of this part is good for parenthesis, and the red metal lick gives it a flickering effect and makes it more stylish.
It's said that dressing up starts at your feet.
View detail
If only it were less expensive
It's not noticeable once you put it on, but it's nice to know that you won't get frustrated with the Wheel on and off W
I just wish the price was a little lower
View detail
Frustrating assembly is improved
Speaking of OEMAxle Color, I've experienced many frustrating moments during the assembly process
hang on and fall down, or tilt it at an angle and fall down...such an Axle! No matter how the Color shakes, it will not fall off, even if it is bumped a little
There's a little ear where it hangs on the Dust Boots side that catches on the Boots and holds it in place It is
I'm happy with the color and texture of the cut-out, but the price is a bit high
It's made of aluminum, so it's lighter under spring than OEM
It can be recommended for dress-up on your feet
View detail
Fits: HONDA CHALY series 10InchWide wheel (5.5J), HONDA DAX, HONDA CHALY series 10InchWide wheel (4.0D), HONDA CHALY series 10InchWide wheel (3.5J), HONDA CHALY series 10InchWide wheel (2.75J)
To the MONKEY!
This is a change from the previous General Aluminum Wheel
I'm happy with the way it turned out
Installation was no problem as per the Instruction Manual
I just wish the price was a little cheaper in its own right
View detail
3. Required for 5J
This bub is mandatory if you are going to consolidate with GCraft.
Usually with Size's Swingarm 3. Enable 5J.
Making is also firmer than I thought, there are also not bad.
The only complaint is that the instruction manual is unkind.
There is not a detailed explanation to some extent after writing the assembly drawing.
There was also a part that I added by handwriting etc,
I thought that I used the drawing of the internal document as it was for explanation.
There is nothing particularly difficult as there are not any difficulties though.
At the very least you should tighten Torque etc. I would like to mention that part.
View detail
It purchased to Front-tire exchange of WAVE125. It loosens during a run, since it is dangerous, he would like to exchange each time in the case of Tire desorption, if re-use is repeated, but since the Flange Lock nut of this Size is seldom sold, it i
It purchased to Front-tire exchange of WAVE125.
It loosens during a run, since it is dangerous, he would like to exchange each time in the case of Tire desorption, if
re-use is repeated, but since the Flange Lock nut of this Size is seldom sold, it is difficult to receive.
Obtaining by
webike is saved dramatically.
The
price is also cheap and satisfactory.
View detail
Structure is beautiful, and since it is made with sufficient accuracy, it can use in comfort. Since all things required for attachment had also gathered, there was no necessity for an additional purchase and it was good. I think that it will be po
Structure is beautiful, and since it is made with sufficient accuracy, it can use in comfort.
Since all things required for attachment had also gathered, there was no necessity for an additional purchase and it was good.
I think that it will be possible if attachment has a tool since it is fairly easy.
View detail
Fits: HONDA MONKEY, HONDA GORILLA
it used for a tire to carry out center appearance. without distortion coming out, since it was made with sufficient accuracy, center appearance was carried out exactly and it was able to do.
it used for a tire to carry out center appearance.
without distortion coming out, since it was made with sufficient accuracy, center appearance was carried out exactly and it was able to do.
View detail
Although attachment is simple, there are many processes troublesome in it being various. Since it was made with sufficient accuracy, even if not adjusted, it was able to run only by carrying out bolt-on.
Although attachment is simple, there are many processes troublesome in it being various.
Since it was made with sufficient accuracy, even if not adjusted, it was able to run only by carrying out bolt-on.
View detail
When it was going to attach the aluminum swing arm made from a thailand to KSR110, there is no rear axle shaft and it used the general-purpose axle shaft here. When seen from the pure axle shaft, the same product made from steel of riding of grease wa
When it was going to attach the aluminum swing arm made from a thailand to KSR110, there is no rear axle shaft and it used the general-purpose axle shaft here.
When seen from the pure axle shaft, the same product made from steel of riding of grease was also good at satin, and received the strong impression.
Since it is important components, it is recommended at those who want to be scrupulous.
View detail
The packing which occurs between a meter gear, a meter gear, and a hub bearing from a pure hub is transplanted. If this packing is not more shallowly inserted in a hub, garbage is likely to go into the direction of a gear. He put in quite more sha
The packing which occurs between a meter gear, a meter gear, and a hub bearing from a pure hub is transplanted.
If this packing is not more shallowly inserted in a hub, garbage is likely to go into the direction of a gear.
He put in quite more shallowly.
The accuracy has improved.
All screws are attached.
In the case of the Faulk appropriation of NSR, he does not forget preparation of the axle shaft of NSR in the case of the Faulk appropriation of NSR.
View detail
being aluminum shaving and coming out -- structure -- firmly -- it is carrying out. Since all bolts follow, it is not necessary to purchase it later. In order to use a pure speedometer, a meter gear is transplanted, but a crevice is made for a whi
being aluminum shaving and coming out -- structure -- firmly -- it is carrying out.
Since all bolts follow, it is not necessary to purchase it later.
In order to use a pure speedometer, a meter gear is transplanted, but a crevice is made for a while between a dust seal and a hub.
It may be necessary to put in Sim etc.
It can be used without for the moment dust entering.
View detail
Fits: HONDA MONKEY, HONDA GORILLA
although like [ foil carries out center appearance and ], a chain line can be taken out finely and found useful. It uses and is [ direction ] various, and it comes and is convenient.
although like [ foil carries out center appearance and ], a chain line can be taken out finely and found useful.
It uses and is [ direction ] various, and it comes and is convenient.
View detail