Reviews
Cannot be installed with this product alone.
It is very light in weight. However, it requires nsr50 Late OEM Color for installation (Discontinued 52141-GT4-970) (e.g. "I'll be back") View detail
I feel like it's a lot sturdier.
This time I purchased GCraft's Shift guideTYPE 3 for CT125. This product is said to reduce the flexing of the GEARShaft and make the shift change quicker. It is true that the HUNTER sometimes has a problem with up-down when shifting, so it would be very nice if this problem could be solved.
Also, they say that the Shaft is longer, so the torsion and distortion will be worse.
We immediately started the installation process of the products we received:??
If you remove the Engine Guard, footpeg, and Shift Pedal? Oh, ??Shaft is shorter than JA55, in fact, there is only enough clearance for the thickness of the shaft....
Is there not much Merit in this? I thought so, but I recovered and completed the work. The work took approximately 45 minutes.
I was a little anxious, but when I tried it out, I found that ?? the shift change from 1st, 2nd, 3rd gear and N was very smooth. In addition, the transmission of power is simple and no unnecessary force is required.
The impresario of the same Parts on the Net is No change. Ya It's gotten heavier." I think that this is a significant improvement in operability. I drove about 45-50 km and had no problems at all.
View detail
Ideal for fall prevention
The product is good, but WeBig's shipping is good and very good.
Companies A and R are slow to purchase from inventory and are not counted on.
View detail
I am more then satisfied with the positive and direct feel now felt when changing through the gears
About quality and texture - The shift guide from G-Craft uses a sealed bearing unit and is made from billet aluminum with detailed machining and a silver anodized surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - I was unimpressed with the overall feel of the original setup for the gear shifting as it felt vague. The transformation with the simple addition of this shift guide is amazing and I am more then satisfied with the positive and direct feel now felt when changing through the gears. Products to buy together - A product to purchase that will also ad in improved gear shifting is an adjustable shift rod that will allow you to perfectly position the gear lever to your desired position using the rest of the original rearsets. Difficulty of installation - The installation of the shift guide is a intermediate task that took 1 hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to secure the shift guide over the shifter shaft to the engine case. Cost performance and comparison with other products - I find the cost of all the products G-Craft sell to be on par when compared to what most other companies sell their products for but this is not the case with the shift guide as there are quite a few cheaper options available here on Webike. About shipping and packaging - With there being no cost difference between sea freight and EMS for the shift guide, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
To CHALY's Custom!
CHALY This is the Rear Sets of the "Rear Sets"! The price is a little high, but the look and performance are perfect! View detail
shift guide
It is also installed on the ct125A (Korean model) model without any problems. Before installation, the connection felt slightly distant when shifting gears, but after installation, the feeling of direct connection has improved. You can experience a luxurious experience at a relatively reasonable price. As for the installation difficulty... It's not difficult to remove the engine guard, remove the four bolts at the bottom, and create space. If you refer to YouTube, it's not difficult. View detail
Certainly tightly
The one I bought before didn't fit jc92 and I used to change only the LINK.
I bought this for my jc92 and was able to install it with no problems.
I feel like Motorcycle on a top ranking.
Can be changed with Snap
I just wish the price was a little nicer.
View detail
Certainly chunky.
Replaced with KITACO Shift link.
Shift's difficulty in getting in has been reduced and it is now firmly in place.
Installation is less difficult, but the location is a bit of a hassle.
View detail
Fits: HONDA CHALY series 10InchWide wheel (5.5J), HONDA DAX, HONDA CHALY series 10InchWide wheel (4.0D), HONDA CHALY series 10InchWide wheel (3.5J), HONDA CHALY series 10InchWide wheel (2.75J)
G-Craft Wheel Spacer
This item is amazing, the pictures online at purchase doesn't do it justice. The color of the spacer is nice and bright. It is show quality ready. Great fitment. View detail
Beautiful product
Flawless, not cheap but boy you can see the craftsmanship and the value. Nice to have the bearings in the swingarm pivot and good chain adjusters. A good bit lighter than the stock swingarm too. IMO this is the best stock length swingarm for the Monkey. View detail
A wonderful design that perfectly attaches to the engine casing and aligns with the shift spindle
About quality and texture, I can confirm the quality great and the material used is aluminum that is CNC machined to shape and finished with an all silver anodized coating.About the feeling of use, Aids in a smoother gear change for the Monkey. A wonderful design that perfectly attaches to the engine casing and aligns with the shift spindle. Products to buy together, To complete the operation of the gear changes it would be ideal to also add an adjustable shift link to your cart to replace the original Honda fixed shift bar.Difficulty of installation, I can say the fitment of the shift guide for my installation was average due to the removal of the gear shifter to allow for removal of the original Honda parts to be discarded and engine casing bolts that require removal to add the longer mounting bolts .Cost performance and comparison with other products, The pricing of this product is good, you receive a very high quality part that also works extremely well, there are cheaper options available but their styling is bulky and less attractive.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Soft
It changed from a 300 won lighter to the feeling of using a zipper lighter. However, after installation, there was an issue where the 2nd gear -> 1st gear did not work. I am not sure if the center installed it incorrectly, but after fixing it, it is still good. Other than this problem, I am very satisfied with the product. My Monkey gear stand felt a little low to begin with, so I looked for a product that could raise the height. It raised the height and the gears went in smoothly, so I think it was a good purchase. View detail
guide point~!!
I only did Kitako's shift link, so it worked well. But there were some regrets I bought a shift guide for ZCraft. It complements Kitako's product more. Further upgrade of gear clearance and shift. The exterior is also upgraded to silver metal. When I drove the car, it was different from when I installed the Kitako shift link. I recommend it. Thank you. View detail
Top quality piece!
Great fitment, great quality, overall stunning product! Lovely swingarm that makes driving way more stable in the corners! View detail
Worth it
The texture of aluminum is luxurious. A shift link is also included, so there is also a change in the sense of shift. It looks great like a genuine product. View detail
Even JA65 is effective.
I once placed an order directly with the manufacturer, but the delivery date was more than a month later, so I had removed it from my priority list, but I happened to find it in stock at Webig while looking for other parts and purchased it immediately. The instruction manual is simple, but I think that people who install this kind of parts can install it without relying on the manual. Although it is not used very often, it also makes it easier to operate the half-clutch. View detail
The highest quality brake pedal available for the Monkey
About quality and texture, I can confirm the quality great and the material used is aluminum that is CNC machined to shape and finished with an all silver anodized coating.About the feeling of use, The highest quality brake pedal available for the Monkey. Not only does this pedal look superb when compared to the original Honda part but it also operates flawlessly improving the braking ability.Products to buy together, To complete the look the G-Craft shift pedal is a must to also add to your cart.Difficulty of installation, I can say the fitment of the rear brake pedal for my installation was easy due to the simple nature of exchanging the original Honda part with an aftermarket part that bolts into the same places without modification.Cost performance and comparison with other products, The pricing of this product is good, you receive a very high quality part that also works extremely well, no other brands offer an upgraded options for the Honda rearsets.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
The highest quality gear shift pedal available for the Monkey
About quality and texture, I can confirm the quality great and the material used is aluminum that is CNC machined to shape and finished with an all silver anodized coating.About the feeling of use, The highest quality gear shift pedal available for the Monkey. Not only does this shifter look superb when compared to the original Honda part but it also operates flawlessly improving the ability to shift gears.Products to buy together, To complete the look the G-Craft brake pedal is a must to also add to your cart.Difficulty of installation, I can say the fitment of the gear shift pedal for my installation was easy due to the simple nature of exchanging the original Honda part with an aftermarket part that bolts into the same places without modification.Cost performance and comparison with other products, The pricing of this product is good, you receive a very high quality part that also works extremely well, other brands offer cheaper priced options but not to this standard.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
G-Craft 38501
For the first time I purchased a product of this brand. I was very pleased. Very good overall detail design. I was pleasantly surprised by the functional elaboration, namely, I liked the selection for the hexagon at the end of the stud to be able to tighten the nuts and not damage the connection of the two metals. We kindly ask you to add in the description that two parts are included. I recommend... View detail
Cost performance is the best as Universal!
If you purchase the end rubber at the same time, you can use it with most of the M6 Bolt Rear Sets' Change Pedal and Brake pedal. View detail