Reviews
Change rod for Rear SetsRepair Parts
[How is it used?
Repair for Shift rod of Rear Sets of other Brands that has been bent due to a fall.
Was the one you received as per Image?
Yes
Was the installation difficult?
It's easy, just remove the footpeg and replace it with a Shift rod.
How was your experience with it?
The 110mm Shift rod was bent, so I was a little concerned that it was a little long, but this was the only Size that came close and it was cheap, so I bought it.
As a result, I am satisfied that I can adjust the position to my liking with Limit.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I think there will be a demand for Repair if you can offer it in 10mm increments.
View detail
If you remove the Rear tire on the Grom frequently!
[How is it used?
When changing tires or sprockets by removing the rear tire
Was the one you received as per Image?
Yes
Was the installation difficult?
It was very easy to replace the OEM collar.
How was your experience with it?
When I put it in, I was worried that it was too hard, but it was firmly fixed in place, so the Stress that used to fall out was gone.
It is especially useful when threading Axle Shafts. Recommendation for those who often work alone.
[Included Parts:were they on?
Instruction Manual was available.
[Was there anything that disappointed you?
It would be nice if it were a little cheaper.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA GORILLA, HONDA MONKEY
Recommended!
Purchased for Spec. change.
4J used for Front and Rear
Reinforced Plate and Logo overlap…
View detail
Fits: Others , HONDA MONKEY R, HONDA MONKEY, HONDA DAX, HONDA CHALY, HONDA BENLY , HONDA APE
No problem with the product.
Since it is difficult to install, it may be a good idea to spray Silicon grease to install. View detail
สวิงอาร์มตัวนี้ชอบมาจากที่เคยลองใส่ของ takegawa เปลี่ยนใจมาลอง g craft สวยชอบมากเลยครับ กล่องใหญ่ เป็นลูกปืนด้วยตัวใส่แกนสวิงอาร์ม โอเคเลย View detail
Fits: HONDA GORILLA, HONDA MONKEY, HONDA R&P, HONDA MOTRA
For Custom
Purchased for a custom order. The OEM was rusting and the steel was thinning, so I feel more secure in the strength of the product. View detail
Shift is now in and comfortable!
Installed on AA04SUPER CUB 50.
Before installation, there was a high probability that Shift wouldn't go in.
After installing the shift guide, I was able to get in crisply and Stress was gone.
Installation is not difficult if you have tools, as it can be done by removing the four Footpeg Mounting Bolts under the Engine and the Shift Pedal. The work took about 30 minutes.
The price is high, but the product is highly satisfactory.
View detail
a delicate finish
I bought it after seeing a review that it fits neatly. Of course, I bought it because it is black. The front and rear look different and must be installed with care. View detail
G-Craft 400x8 rim no holes
A very good fit on my 1969 z50 k1 monkey. Looks excellent and spreads the 350 tire out nicely. The chain does not interfere but if you use a 400 tire it may be a problem. I only build old hardtail Hondas but on a swingarm bike you would have room for a 400 tire. View detail
Fits: HONDA CUB SeriesHorizontal TypeEngine 12V
Installed on a 2007 HA02
The jittery feeling during downshift is reduced and comfortable shift change is now possible.
I am glad I installed it.
Installation was very easy.
View detail
Nice wide G Craft 8" rim, monkey bike stuff.
Just recieved my 400-8 G Craft solid rim. It looks great and spreads the tire out really well. The fit and finish is perfect as you would expect from this company. And this proves that a 4 inch wide rim does fit on a rigid frame z50a. View detail
Gear changing is now lighter.
It was installed at the same time as Over's Rear Sets were installed.
I used to install KITACO's Shift link for about 6 months.
The GEAR can be raised and lowered more smoothly than in the previous model.
The sound is light, and there is no snagging when putting it in the N.
Well, even when assembling Rear Sets, the LINKs are carefully lubricated.
It may also have something to do with the fact that the Over Rear Sets and the compatibility of the
Looks good.
If you are purchasing the product, make sure to adjust the position of the Shift Pedal and the LINKs.
Lubricate them.
View detail
Prevention of warpage and aging deterioration
Since it was introduced with a new motorcycle, there is no large rattle in the shift rod and the shift feeling is tight with the Rear Sets, so it is hard to feel the change of fee ring-up improvement by adding the shift guide. I hope it will lead to the prevention of rattling of the mission and the prevention of deterioration of the internal shift drum, so it is a good investment in the long run;
I'm looking forward to the suppression effect of entering the MiracleZone-like GEAR…
Neutral is now tightly recognizable by its toes, and as the name of the product suggests, it is tightly firm reinforcing parts around the Shift;
I think you will see its true value in the early spring touring;
+The +M6 bolt has been replaced by a Stainless cap bolt, and the product has also been changed to Material:The bearing that comes with the Aluminum product has no rattling and comes with a rubber seal to prevent dust from entering the product as seen on the Radio controlBuggy, so I think it is a good product in Large size.
Other products are just press-fitted bearings or dry bushings without rubber seals, so I think PlusPoint has thoughtfully produced this product;
View detail
G craft swingarm, 2023 grom
I was very pleased with the items and service from webike. The swingarm was perfect and exactly what I was expecting, fits perfectly and looks great. The shipping was fast to USA and customer service was excellent. Will definitely be ordering from these guys again very soon. View detail
Fits: HONDA CUB SeriesHorizontal TypeEngine 12V
Countermeasures against Shift Loss
Shift loss is drastically reduced!
It is highly recommended when Rear Sets are installed.
And neutrals are easy to get into!
View detail
Ponting on OEMSwing Arm
CHALY, to DAX!
Can be pontooned onto OEMSwing Arm.
OffsetSprocket is also not required.
The maximum number of 4Js that can be entered without modification is 4Js!
View detail
Ratings are divided.
Impression ratings are divided into effectiveness and non-effectiveness.
I am glad that I have installed it.
In particular, the hard entry of Second has been smoothed out, and the jerkiness of the Shift change has been reduced.
I think the quality of the product is also high.
It would be better if the price were a little lower.
I gave it 4 stars for satisfaction and Cost performance in that area.
View detail
You should have this when you replace the rear tire.
When replacing a tire, the Axle Shaft Color falls off if it is OEM. This product is designed to catch on the Seal, so it doesn't fall off. Good! View detail
just to be sure
I tried driving with it installed but did not feel it that much.
I feel that the Brushbo effect has changed things a little bit so that I can get a little bit of Kachica.
I think the rest will be good for the protection of Engine in the long run.
View detail
Shift feeling is better.
It was easy to install and the shift feeling was not bad before installation, but after installation, it is tightly increased and I can shift quite comfortably. View detail