Reviews
Fits: HONDA MONKEY125, HONDA CT125, HONDA GROM, HONDA DAX125
Front Tappet Cover and Quantity:If Set is Recommendation
I matched the Front Tappet Cover with GCraft.
The installation itself is easy, but thanks to the NORMAL overtorque, I think it will be more difficult to remove the NORMAL.
The aluminum fins are a good accent to the heat sink.
The machining accuracy is good, and when the O-ring is attached, it can be installed as nicely as OEM.
If you have a shock driver to remove the OEM and a plastic hammer to install it, the conversion will go smoother.
The weight is also a little lighter than OEM.
View detail
Fits: HONDA MONKEY125, HONDA CT125, HONDA GROM, HONDA DAX125
Dress-up rather than cooling effect
The construction is solid and the fins are beautiful.
I don't think it has much of a cooling effect, but from a dress-up perspective, I'm very happy with it since it will be in a prominent location.
View detail
To prevent scratches and stains
If you read the instruction manual and check the parts, you can install it with just three screws without any problem at all.
I haven't tumbled or fallen asleep, so I haven't experienced the effect, but it is true that I feel safer with it than without it.
There were some scratches from previous maintenance. I'm sure it's not ineffective.
The only problem is that it's not cheap.
View detail
Taped Fin Cover
About quality and texture - Excellent quality, beautifully machined part with etched G Craft logo. About the feeling of use - Perfect fit and helps with removing heat from the engine head. Products to buy together - Matches up nicely with the G Craft cam cover, product # 31256. Difficulty of installation - Easier then easy, a straight forward swap with the OEM part. Cost performance and comparison with other products - This part from G Craft is expensive and there are cheaper options from other brands on Webike but not with the fins. About shipping and packaging - When EMS shipping is available it is cheap and arrives in about a week so no complaints and arrived safety with plenty of air pillows for protection. Any concerns, cautions, or advice when purchasing - You may also want to add some O-rings to the order as G Craft do not include any. View detail
Expected
I've been looking for a new GCraft product for a while now, and I ordered it as soon as it was released as Type 2. View detail
Monkey got billet
Billet aluminium just looks so good in the raw aluminium finish so much better then the cheap looking OEM ones from Honda with no cooling fins. Being an air cooled engine having any item fitted that can help with cooling is a great idea. Not a cheap product to purchase when you want two of them but like they say you get what you pay for. Would have been nice if G Craft would have included new o rings so just keep that in mind you may also want to purchase some OEM Honda tappet cover o rings part number 91372-KPH-900 with your order. Looking forward to purchasing the matching G Craft finned camshaft cover next. View detail
I installed it because I didn't like the flat look of it, but...
I was concerned about the OEM flat design so I went with this product with fins.
I'm satisfied with the shape of the Large, but the color is quite different from the Engine, so the appearance is floating.
I don't know about the effects lol.
I think it has some cooling effect because it has fins.
View detail
It was a Type with a linear shape.
In the product photo, there are two types of fins, one is straight and a little bit rugged shape, and the other is fashion one which has R on the whole.
The CAD-like diagram has an R on it, so it's probably a product improvement or something, and the current lot has a Type with an R.
I was vaguely wondering if it would come, but the product with the straighter shape came. In the instruction manual attached to the product, it is shown that it has R
I don't know what it is, it's got a picture of a shape on it. (Purchased on Webike in June 2021)
I don't know if the product photos are wrong or if it's a dark pot as to which lot is coming, but the curve FashionType.
If you're expecting to get one, be careful. It's basically Dress-up parts and I'm not sure about this…
The finish of the object itself is beautiful.
The OEM Cover is painted silver gray, so the color is slightly different, but it has a custom look.
There is no rib or anything in the oil pool behind the cover, so it's a comforting measure against oil temperature.
View detail
It's solid.
The detailing is as good as you'd expect from GCraft, and it's well-crafted.
The cooling effect isn't always where the Oil is soaking in, so I'll expect it to be adequate.
I bought two and replaced both in and out and that alone was a dress-up.
But when you change the in side, the Hexagonal Wrench is not enough, so you need to change the Air Box or use a shorter Wrench to tighten it.
In addition, because NORMAL is tightened up by a considerable overtorque though it is Cover that seals by ORing, that is more difficult when replacing it.
View detail
Used for Engine overhaul
I changed to this one because the serviceability is better than NORMAL, and I'm satisfied with the construction. View detail
G-Craft Finned Tappet Covers Monkey 125
These finned tappet covers by G-Craft add a cooling function for your Monkey 125. They look great and are very easy to install by just simply swapping them out with the OEM ones. I cannot recommend this item enough to other Monkey 125 riders I meet out and about. Keep up the good work G-Craft with your parts designing and manufacturing and thanks Webike for stocking so many parts for the Monkey 125 View detail
for MONKEY, but CT110 HUNTER CUB is the same.
Unlike the OEM Front Tappet Cover, this product has air cooling fins.
I don't know how it actually works, but I think it'll cool you down a little.
In my case, I bought it for its parenthesis good looks, so I don't care about the details!
No issues at all with the product's texture or accuracy! The price is just too high!
Easy to install, but the CT110 HUNTER CUB was easier to work on the exhaust side with the Under Cover removed.
View detail
A pity
Basically, many players who play 4 mini bike on G craft’s products are familiar with them, but they are more expensive than the products of this brand. They are based on the products in the picture, except that there is no color to choose from and no screws are included. , It's a pity for me View detail
G-Craft engine brace
Very well made, smaller than expected but the results are brilliant. Bike vibrates like a paint shaker as before, but the high frequency numbing vibrations have been dulled/removed from the experience. View detail
usually
BAJA88cc. attached to 16cm Long Swing Arm But the processing of RInner fender is necessary The appearance became neat
Double-sided tape on the Long Swing Arm, formerly known as Universal? And it was fastened with an in-hemp palmac
View detail
It is cheaper than building
Dress-up is the main, but I also expected rigidity Up and bought it.
As a result rigidity Up could not be experienced ^ ^;
Very good construction and tightening appearance.
White Anodized is also good, almost 2 years, almost Blue is almost empty storage, but almost
It is not rusted.
It is somewhat expensive and if you replace only this, it becomes strangely good looking just there,
I think that it is a difficult point to become unbalanced with others.
I want to get other hands and get stuck in a bog in a good way.
View detail
Engine hanger exchange
Engine hanger attached from the beginning was not cool, so we decided to buy it this time. As expected it is GCraft, both looks and making are solid. Although it is a little less noticeable, I think that it is a product that increases Dress-up degree. View detail
Fits: HONDA MONKEY, HONDA GORILLA
The quality of the G-Craft Normal for frame Engine reinforced Mount Plate is good. I have already installed onto my motorcycle. It can make the engine not much shock. I feel more stable when I am driving.
The quality of the G-Craft Normal for frame Engine reinforced Mount Plate is good. I have already installed onto my motorcycle. It can make the engine not much shock. I feel more stable when I am driving. View detail
he thought that it probably adhered well and bought it A thing is good too. truly, G Craft description is also kind and which die length is where -- etc. -- very kind Since a Clutch cover is different. Naturally, although several are different, the
he thought that it probably adhered well and bought it A thing is good too. truly, G Craft description is also kind and which die length is where -- etc. -- very kind Since a Clutch cover is different. Naturally, although several are different, they suit almost. It was about three to have bought it with the addition. It was impressed that the plate Screw of the generator was a hexagon socket. Since it licked here, it was saved in that of the method of したっ in the hexagon head. View detail
Since color is abundant, it is recommended at a dress-up up. When it attached, it was somewhat regrettable that clearance opens, but since it is cheap, I think that it is good.
Since color is abundant, it is recommended at a dress-up up.
When it attached, it was somewhat regrettable that clearance opens, but since it is cheap, I think that it is good.
View detail