Reviews
I wanted a little more load bearing capacity.
As for installation, it is easy to understand if you look closely at the Illustration.
If you remove the Plastic Blind on the side of the Seat, you will see the M8 Female Screw on the Seat rail, and simply fasten it with Bolt through the attached collars in 4 places.
The carriers are narrowed backward from the width of the rear edge of the Seat and extended at the same height as the Seat, so that a small type Seat bag can be installed without any problem, and a slightly large type bag can be fixed depending on your ingenuity.
However, the load capacity is limited to 3 kg, so care may be required when placing very heavy objects on it.
The Carrier and Bracket are made of iron and painted black, but I think it is probably a baked-on paint with strength.
The collar between the Bracket and the Seat rail is Material:The M8 Bolt that holds the Bracket is Stainless Steel, but the Bolt that holds the Washer, Bracket and CarrierBody is Plating.
I prepared Stainless Steel Black painted Bolts to match the Black Carrier.
The silhouette is not a typical "carrier" silhouette, but rather a natural, backward design that extends smoothly and naturally.
In detail, on the top surface of the Carrier Gcraft" The product had a Laser engraving of "L", and I liked the fact that they did not cut corners.
View detail
Generally satisfactory, but you need to be careful not to pinch your fingers.
The design is also very firm, so I think it's suitable for putting a seat bag on it.
Easy to install. The function is perfect.
Two things I thought were subtle.
You can't use it as a Grab Bar. The Grab Bar is sold separately.
The gap between the plate and the body is too narrow, and when closing the seat, do not hold the side of the seat.
Although there are not many choices for the Grom (JC92) Carrier, I think it is a satisfactory product considering its intended use.
View detail
It was exactly what I expected.
I decided to use GCraft's Rear Carrier, which is more compact and cheaper than the OEM product. The installation is not particularly difficult, and I am using it by installing the Top case of 40L. In daily commuting, I put a Backpack of about 3kg in the Top case, but I am satisfied that the Top case can be fixed firmly without anxiety that it rattles or comes off.
Even if you remove the Top case, it looks nice and neat.
View detail
G-Craft G-Craft GCraft Rear Carrier
I bought it because I liked the design, and when I installed it, the design was exactly as I wanted it to be, and I'm glad I bought it.
I think it would have been better if it was a little larger.
I'm a little nervous about the 3kg load capacity, which is the same as HondaOEM's, but I want to use it so that it doesn't put too much strain on the frame.
View detail
Easy to install
I bought this to install a GIVI top case. The installation was very easy and although I have attached an instruction manual, you don't need to look at it to install it. Thanks to your help, I was able to install the GIVI top case as planned.
The only drawback is that you have to tighten the seat rail with bolt to fix the plate, but if you are not careful when you install the seat, you might hurt your finger between the seat and the side plate. If you are not careful when you install the seat, you may hurt your finger between the seat and the side plate.
View detail