Reviews
GCraft is as good as it gets.
I like it very much
Also, if the price were lower...
View detail
It's a good look.
I am satisfied with the product exactly as I wanted.
It looked great and I couldn't stop looking at it!
View detail
The impression changes by a Large amount, and there are a few points of concern.
[How is it used?
I bought it to change one of the areas that I didn't like the look of the NORMAL DAX, and the change together with the Rear fender-less and Exhaust System has changed the impression considerably.
Was the one you received as per Image?
I am satisfied with the texture as per Image.
Was the installation difficult?
The installation is so easy that even a beginner like me can do it with a small one-hour job.
However, you must read through the Instruction Manual. This is because the position where the Fender is to be installed 10.5 cm from the bottom edge of the Outer tube. If you do not look at these parts, you may end up with unintended results.
How was your experience with it?
It was quite nice to be able to install Inner Tube's Guard-like Parts, etc., using the Bolt holes that removed the OEM Fender.
[Included Parts:were they on?
Instruction Manual is included.
[Was there anything that disappointed you?
The brake hose guide comes with an extension part that prevents the hose from interfering excessively with the Up Fender, but it still interferes somewhat, and the color of the black hose is transferred to the Fender.
It is a moderately priced product and would be better if this area could be improved.
【Review】
I have written a lot about it, but I am generally satisfied with it, except for the cosmetics.
I don't run in the rain, so I'm not sure how much it would change the practical aspects of the product, but at least as far as looks go, I don't think this is a product that would betray anyone who is considering making Up Fender.
View detail
Hurdle is a bit high for a beginner to install, but the Rear area is quite Refreshing!
[How is it used?
The front and rear fender area of the DAX125 was heavy, so we installed a rear fender-less system in conjunction with the exhaust system replacement.
Was the one you received as per Image?
I am satisfied with the texture as per Image.
However, the fact that it has a reflector and the number angle conforms to the new standard was the deciding factor, so we decided to go with this one, even though it is a little expensive.
Was the installation difficult?
The installation itself is easy, but I thought the process of removing the OEM Fender was a bit of a hurdle for a beginner like me.
It was especially hardMODE to remove the OEM License Plate Light from the OEM Fender cover in order to use the OEM License Plate Light.
(I couldn't figure out the Coupler, so I ended up cutting a piece of the OEM Fender cover to separate the License Plate Light from the Cover.)
How was your experience with it?
After looking at Fender Eliminator Kits from various manufacturers, I decided on this product, and I think it was the right choice because it looks the most refreshing.
(However, if you bend down to look into the Bolt, you may be a little bit surprised by the number of Bolts.)
[Included Parts:were they on?
There was a Mounting Instruction Manual.
[Was there anything that disappointed you?
As a disappointment or request, I thought it would be new if the Instruction Manual included instructions on how to remove the OEM Fender.
The removal time was about three times longer than the installation time, so the Instruction Manual for the installation would be more useful.
【Review】
I have written a lot about this product, but I am very happy with my purchase.
Personally, the three things I did not like about the look of the DAX125 were the Exhaust System and the front and rear Fenders, so I was determined to purchase only those three items that I was absolutely satisfied with.
The License Plate Light is hidden inside the Fender, making it quite Refreshing, yet the Number angle conforms to the new standard, so it is a good product that does not make you feel guilty.
View detail
Appearance highest
It is well made and Cost effective. The installation process is easy even for a clumsy person like me. View detail
Quintessential GCraft
I don't want to soak my back in the seat, so I decided to look for a carrier …OEM looks sturdy, but the length is short and it looks like THECarrier. It was easy to install. View detail
Quintessential GCraft
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
it's simple
How was your experience with it?
The angle of Number is good and the weight is light because of Aluminum.
[Included Parts:were they on?
All are available
[Was there anything that disappointed you?
This is a special product for each car model, but Blinker Harness modification is required. (I can only make my own.) It'd be a lot easier if you could just wear it.
▼ Opinions and requests
It was a shame that the Gold amount was so high that it needed to be processed.
View detail
It's on the road!
The first thing I wanted to do was to install the Down fender, so I did that right away and the OEM fender was easy to remove.
Down fenderKit is assembled first and then installed.
When I lower the Fender, the gap between the Fender and the Tire disappears, so the Nut on the back of the Fender turns together, but the Spanner doesn't go in.
Assemble first, then install.
Because Bracket and Nut which fix Accelerator Wire to OEMFender can not be used by lowering Fender, I have become a little expensive because I purchased a clamp separately, but if you are worried about Wire not being fixed, I recommend you to purchase the one with a clamp from the beginning. I recommend the thing with the clasp from the beginning. I think that the one made by Mukawa was attached.
View detail
No rainfall.
I installed it without painting the white color on MONKEY of Classical white tank. The shape and structure is just like GCraft, but... Size is minimum, so the water splashed on your face in the rain or on the wet road in the tunnel. It's only for people who don't ride in the rain. I don't ride when the weather is bad. View detail
naughty child
Satisfaction with the shape etc. is very good, but the serviceability is poor.
It was very difficult to attach it to the back of the number because there was no space at all.
The angles and stuff, no problem.
The License Plate Light is a Universal Product, so it only has a Bullet Terminal!
View detail
Fits: HONDA MONKEY, HONDA GORILLA
The mounting holes were severe.
I changed to 5cm Long Swing Arm and I needed to relocate the Fender as well, so I bought this one.
Although the part itself is a simple form, the mounting hole Pitch of Frame is too Exactly and Bolt does not fit, so I widened the hole and installed it. It would have been better if one of the holes could be used for adjustment.
Also, you can't use the tools on the Bolt to mount the Bracket with the Tire, so it's faster to remove the Tire from the beginning to make room for the tools.
Considering the color of the surrounding parts, I applied Black paint, Gold paint and Carbon Seat.
View detail
I'm glad I bought it
It is solid for the price and I thought about making my own, but I'm glad I bought it.
The Fender's deviation from the Swing Arm is 10? Balance is better (the second photo is after installation).
View detail
Only for people who don't run in the rain.
It's smaller than I imagined. It is thought that the role of the Fender is hardly fulfilled. I think that the appearance is good in Down fender installation. It is regrettable that the price is high for FRP. View detail
Making is very good
I bought them when I redesigned the suspension, and I used G-Craft 3.5J front wheels So I went with the same Manufacturer
The construction is very good It has thickness and the pattern of Carbon is beautiful and I can feel a sense of luxury though it is a small part It's very well made and as expected of G-Craft I didn't think it was important, but when you actually run it, the dirt will hit the Engine and The puddle jumps up the water, so it's not much different than what you'd expect, or not wearing it I prioritized looks, but I wouldn't recommend it for those who also want function
The other thing is that the price is a bit high, I think it's Carbon so it's inevitable, but it's a bit less expensive I'd be happy with the setting of
View detail
It is quite Parenthesis nice.
Instruction Manual is easy to understand, intensity seems to be problematic.
Because Tail light faces upwards, I recommend it because it can be a Fender Eliminator at a low price for those who can tolerate that point.
View detail
Simultaneous exchange with Little fender
Rear has DAYTONA 's Carrier less Bracket attached, but it was able to install without problems.
Just because OEM tool box can not be installed,
I fixed it to Light Bracket with Tie Wrap.
As the name suggests, it's Fender of LePera, so car washing is easy,
Easy maintenance, installation is full of 4 Bolt and easy.
But there is a feeling that this is this price?.
I just cut Aluminum sheet and folded it.
G mark of the crane is included - - - It may be as low as 1000 yen.
The price is expensive, but the product itself is satisfied.
Even if it is attached so much that it is not conspicuous, I think that it will suit any type of Custom.
If I want to replace Fender, but it does not suit you - - -
Why do not you try such a person once.
View detail
[Webike Monitor] Although not a pure Bolt with the stage but an attached ordinary Bolt is used in the case of attachment, it is specified that it does not tighten a Bolt with all its might as notes. Use of the Screw slack stop agent is recommended in
[Webike Monitor] Although not a pure Bolt with the stage but an attached ordinary Bolt is used in the case of
attachment, it is specified that it does not tighten a Bolt with all its might as notes.
Use of the Screw slack stop agent is recommended instead of
.
The
goods themselves were things also with the very sufficient mounting hole at an Exactly.
View detail
It is used by the gorilla (12V). Since it is carbon, appearance may become tight, and lightness is charm too. Since a form is also normal-shaped, it can attach comfortable. YO which is recommended although it is slightly high.
It is used by the gorilla (12V).
Since it is carbon, appearance may become tight, and lightness is charm too.
Since a form is also normal-shaped, it can attach comfortable.
YO which is recommended although it is slightly high.
View detail
It is good for there being a fender in fact to be visible to a fender less. Since it is a long type, a sheet flesh side seldom needs to become dirty also a rainy day.
It is good for there being a fender in fact to be visible to a fender less.
Since it is a long type, a sheet flesh side seldom needs to become dirty also a rainy day.
View detail
He wanted to repaint and carry out a pure fender, and it purchased. It has been neglected, being pleasing unexpectedly and applying a pure fender, when coming out... It is whether to have bought FRP, if it was this....
He wanted to repaint and carry out a pure fender, and it purchased.
It has been neglected, being pleasing unexpectedly and applying a pure fender, when coming out... It is whether to have bought FRP, if it was this....
View detail