Reviews
Fits: HONDA CROSSCUB110
Expensive but satisfying
The installation itself should be easy since it is sandwiched between the Light Guard, but it was somewhat difficult to install because it was hard to reach the top of the Light and the bottom of the Light Guard.
However, I am satisfied with the quality and sturdiness of the product, and the large size is reasonable. I plan to install more Bicycle Baskets in the future.
View detail
Parenthesis is good even if nothing is attached.
[How is it used?
I bought Touring with Main in mind.
Was the one you received as per Image?
It is cooler than I expected.
How was your experience with it?
Parenthesis is good even if it is only attached.
[Points to note]
I don't think so.
How did it compare to other products?
I think it is more versatile than the halfway Large size.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
Quality is high. It would be nice if the bracket part at the back could be assembled with bolt or something to make it expandable, instead of bending it. I am satisfied with the product.
View detail
I wanted a little more load bearing capacity.
As for installation, it is easy to understand if you look closely at the Illustration.
If you remove the Plastic Blind on the side of the Seat, you will see the M8 Female Screw on the Seat rail, and simply fasten it with Bolt through the attached collars in 4 places.
The carriers are narrowed backward from the width of the rear edge of the Seat and extended at the same height as the Seat, so that a small type Seat bag can be installed without any problem, and a slightly large type bag can be fixed depending on your ingenuity.
However, the load capacity is limited to 3 kg, so care may be required when placing very heavy objects on it.
The Carrier and Bracket are made of iron and painted black, but I think it is probably a baked-on paint with strength.
The collar between the Bracket and the Seat rail is Material:The M8 Bolt that holds the Bracket is Stainless Steel, but the Bolt that holds the Washer, Bracket and CarrierBody is Plating.
I prepared Stainless Steel Black painted Bolts to match the Black Carrier.
The silhouette is not a typical "carrier" silhouette, but rather a natural, backward design that extends smoothly and naturally.
In detail, on the top surface of the Carrier Gcraft" The product had a Laser engraving of "L", and I liked the fact that they did not cut corners.
View detail
good quality
The License Plate hits the Tire, so I installed this.
It looks expensive at first glance, so I could have made it myself by bending some Bracket, but it is rather thick and looks good. If you want to refreshing at this price, it would be quicker to buy this one.
View detail
The Fender Eliminator Kit is a wonderfully detailed kit.
This is a Fender Eliminator Kit with high quality of all parts related to installation.
The base plate, the truss-shaped main frame, the blinker stay, and the license plate holder are all treated with black anodized aluminum.
The main frame is gunmetal rather than black, and the manufacturer's name is engraved on both sides of the frame.
The OEM Fender weighs less than 2 kg, but this is all Material:Since it is aluminum, it is less than half the weight and contributes to weight reduction.
Almost all of them are designed to be Bolt On friendly, but only the License Plate Light requires modification of the wiring.
View detail
super quick shipping, awesome rack
I received the package within 5 days of ordering, shipped to my door, well packaged, the rack is high quality, well designed, easy to install and fits my 2022 Grom. I love the look, it's the perfect size. I will definitely order parts from japan web bike again bc canada View detail
Satisfied
It took about 5 days to receive it. I ordered it from another place, but it didn't arrive for over 2 months, so I canceled it and purchased it from Webike. The price is a bit high, but the delivery is quite fast and the product seems to be well packaged. I want to wear it. I'll listen to it often. Sell a lot. It took me 5 days to receive it. I ordered it elsewhere, but it didn't arrive for over 2 months, so I canceled it. I bought it from Webike. The price is a bit high Delivery is very fast and the product seems to be well packaged. I want to install it sell a lot View detail
Generally satisfactory, but you need to be careful not to pinch your fingers.
The design is also very firm, so I think it's suitable for putting a seat bag on it.
Easy to install. The function is perfect.
Two things I thought were subtle.
You can't use it as a Grab Bar. The Grab Bar is sold separately.
The gap between the plate and the body is too narrow, and when closing the seat, do not hold the side of the seat.
Although there are not many choices for the Grom (JC92) Carrier, I think it is a satisfactory product considering its intended use.
View detail
Cool
I'm not sure if I'd like it if it was a little taller. View detail
Easy to install on my 2022 GROM
Webbike delivered this to my door in BC, Canada in record speed, the rack is exactly what I was looking for. Looks great on the bike, I am so happy with it, Thank you Webike! View detail
Does not fit 2022 monkey
should have asked before but this will not fit on a 2022 Honda Monkey Quality item tho. its built solid and is very good craftsmanship. I will have to build some brackets for it. View detail
It would be better if the load capacity was a little higher.
The Endurance Rear Carrier was sold out, so I bought this one.
Installation was very easy.
The load capacity of this product is 3kg, but I usually use it with a 3.8kg top case on it.
So far I haven't had any problems with it being overloaded, but it does make me a little nervous when I'm on a long distance tour…
By the way, when you install the UniversalBase of GIVI's Top case, you can install it in the Center part of the carrier.
Note that when you try to remove the Seat from the car body, it will interfere with the Base and you will not be able to remove it.
We recommend that you install it as far back in the carrier as possible. (However, the center of gravity will be more rearward, so the load on the carrier will be higher, but…)
View detail
In reserve!
The design is good too! The design is good and the capacity is safe. View detail
It was exactly what I expected.
I decided to use GCraft's Rear Carrier, which is more compact and cheaper than the OEM product. The installation is not particularly difficult, and I am using it by installing the Top case of 40L. In daily commuting, I put a Backpack of about 3kg in the Top case, but I am satisfied that the Top case can be fixed firmly without anxiety that it rattles or comes off.
Even if you remove the Top case, it looks nice and neat.
View detail
Might be the cosiest of the GCraft!
When customizing the front of the DAX, you can use the Stabilizer Type 1 and
Quantity:I used it in Set.
Because Size is Size, there is almost no original Front Fender function, but
The look is Sharp and the Parenthesis is better.
I can recommend this product because it is made by G-Cura and the price is very reasonable.
View detail
Design is Cool
The design is parenthesis good and I bought it.
I prefer the look of it to OEMSeat.
It's a pain in the butt, but it wasn't enough to bother me as long as I changed my sitting position appropriately.
The change in mood due to the change in Position is a nice touch.
After that, you don't need to use the rear brake when starting up a hill because your foot will be sticky.
I was able to hold on with my feet.
OEM Round Rubber (Part number 77214-KPH-900) To Quantity:2pc. Set buy.
Depending on the situation, I replace it with OEMSeat.
(Height 168cm, Weight 60kg)
View detail
Appearance highest
It is well made and Cost effective. The installation process is easy even for a clumsy person like me. View detail
Nice GCraft!
I did a comparison with each manufacturer, but it was GCraft! It is easy to install. and it has all the necessary accessories, so this Gold price is not a problem!
It's not vulgar looking, it's accurate and the color Sense is also nice. Because I am a nervous person, I needed to process Harness, and I did it to my satisfaction.
View detail
Quintessential GCraft
I don't want to soak my back in the seat, so I decided to look for a carrier …OEM looks sturdy, but the length is short and it looks like THECarrier. It was easy to install. View detail
G-Craft G-Craft GCraft Rear Carrier
I bought it because I liked the design, and when I installed it, the design was exactly as I wanted it to be, and I'm glad I bought it.
I think it would have been better if it was a little larger.
I'm a little nervous about the 3kg load capacity, which is the same as HondaOEM's, but I want to use it so that it doesn't put too much strain on the frame.
View detail