Reviews
Cool!
I like this shape the best!
It is well made and I have no complaints!
View detail
high-class item
I think the product is worth the price.
The texture is a very high quality surface material, you can tell the difference by the feel.
It feels no different than OEMSeat.
The seat feels a little hard at first, but after using it, it is moderately nice and firm.
Design would be a little thinner in my opinion, but I guess it is difficult to ensure a comfortable ride!
It is a product that does not hurt my buttocks so much!
View detail
Fits: HONDA APE 50, HONDA XR100MOTARD, HONDA APE 100, HONDA XR50 MOTARD
Replace with OEM plastic
Replace with OEM plastic
Refreshing to look at, but not Impactful, and
I am going to try to paint it Black.
View detail
The non-gussied up design is GOOD!
The Grab Bar by DAYTONA that I had been using up to now was not so bad, but I was concerned about the gills of the Fender Eliminator, so I replaced it with this one, which is a less protruding design. I was concerned about the gills, so I replaced them with this one, which has a design that does not stick out too much.
The sleek and clean design is perfect for the Fender Eliminator Motorcycle, and I am very satisfied with the large size.
It's easy to grab and go, and the performance is fine! Now if only it were a little cheaper.
View detail
It will be very cool!
BoltQuantity:Simply fix to the Exclusive Bracket (sold separately) with 2pcs.
After installation it looks very cool.
However, I don't think it matters to those who don't care,
Carbon only,
At the very least, around the bolt holes. [Color] Clear paint, etc.
absolutely necessary [Color] be divided in the Clear layer
The bolt that holds it in place can be tightened too hard. [Color] Clear layer
is cracked, so the Rubber packing + Screw Lock agent
Use
etc. and installed.
View detail
Well made, but quite difficult to install.
BoltQuantity:Bracket is only fixed with 2pcs, but it is good because it is a dedicated product.
It is done.
However, the Flange nut in the picture hits the Frame,
Cannot be installed as is.
It may be difficult to understand in words, but part of the Flange section
The Nut portion was also cut down to about half of the original size.
Also, the back of the frame where the nut is placed is very narrow, so if you have large hands
It may be difficult.
View detail
Impressions of Seat with Stages
The fabric and design are very cool, but I don't really feel the lowdown, and the shape of the seat makes my legs look like they're in a ball. I think it is not suitable for long distance touring… but it looks cool, so I think it is OK. View detail
Seat a little stiff...
Seat is a little stiff as per the Title.
I think it is up to the individual.
I like both the design and the seating comfort.
View detail
Gcraft
There are only 2 sizes available for this sticker. Bought this for 2nd time. My bike already full of stickers so I stick it on my car windscreen. Looks unique. View detail
Mini stickers
Quality of the stickers are good and just nice for the size. As usual, such small items can be shipped by small packaging to save costs instead of the standard box unless you buy few items together. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY
Recommended products
It was used during Conversion to 12v.
Material:Aluminum and lightweight w
I bought it because I wanted to be concerned about what I couldn't see.
I like it, although I am disappointed that it is not engraved with GCraft.
The particularity is that you can see a little when you look into it.
The glimpse is intriguing.
View detail
Design is good and fits the 92 Grom well
I've been curious about this for a while at last week's WeBigSale.
Gcraft's Rear carrier was very cheap.
Purchased
Installation is easy and takes only 10 minutes with a single Hexagonal Wrench.
I believe it will be completed.
It's a low-capacity Grom, but now the Seat bag can be used.
It looks like it can be installed.
View detail
Exclusive sticker
I bought few G craft items but no stickers included. As such, I have to buy separately. Quality is very good but quite costly. View detail
I'm super satisfied!
Purchased to improve footing for my short daughter who will be riding.
As advertised, it has improved.
I think it is not only low, but also good treatment of the inner thighs.
Installation is as per Instruction Manual Slight adjustment." was necessary, but
It was so easy that my daughter, a maintenance super novice, could install and adjust it herself.
120% recommended for people of small build.
View detail
ได้รับสินค้าแล้วครับ/ตรงตามที่สั่ง/สิ้นค้าไม่เสียหายใดๆ/ใช้เวลาในการส่งไม่นานมากครับ/มีโอกาสจะคงสั่งต่อไปครับผม View detail
It's light.
We didn't want to increase the vehicle weight as much as possible, so we decided on GCraft's Carrier.
The total weight is a little over 1200 g. When not in use, the top panel can be removed to reduce the weight by 800 g.
It does not use Seat fixed Bolt, which is good for those who want to remove Seat frequently.
View detail
High quality!
It is EXACTLY when it is set to Rear carrier-less.
I think it is good because it gives the impression that the buttocks have been raised.
I like the length and angle, which is not often seen, and I like the OEM look.
I would say it is overpriced.
GCraft products are safe.
View detail
Fits: HONDA MONKEY R, HONDA MONKEY, HONDA DAX, HONDA XR MOTARD, HONDA CHALY, HONDA BENLY , HONDA APE
G-Craft M6 Reverse Nut
About quality and texture It's great. About the feeling of use The quality was good, and there was no problem installing it Products to buy together M6 bolt , m6 nut Difficulty of installation easy Cost performance and comparison with other products The price is a little more expensive than other companies, but I believe it's G-craft, so I'm satisfied with the purchase About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing There was no problem installing the blinker because of this item View detail
G-Craft M6 Washer Large Outer Diameter
About quality and texture It's great. About the feeling of use The quality was good, and there was no problem installing it Products to buy together M6 bolt , m6 nut Difficulty of installation easy Cost performance and comparison with other products The price is a little more expensive than other companies, but I believe it's G-craft, so I'm satisfied with the purchase About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing There was no problem installing the blinker because of this item View detail
G-Craft M6 Washer Large Outer Diameter
About quality and texture It's great. About the feeling of use The quality was good, and there was no problem installing it Products to buy together M6 bolt , m6 nut Difficulty of installation easy Cost performance and comparison with other products The price is a little more expensive than other companies, but I believe it's G-craft, so I'm satisfied with the purchase About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing There was no problem installing the blinker because of this item View detail