Reviews
Relatively expensive
I have searched for a lot of related products, most of which are only silver, only g-craft has the black color I want, but the parts of this brand are relatively expensive View detail
I wish I'd bought it sooner
I used to use the OEM STAND, but the height of the car changed slightly by extending the swing arm and replacing the Rear Suspension and replacing the tires, and the body of the car was collapsing and waking up too much. Once I put a STAND that was a little shorter than OEM, but the body collapsed too much and I had to return to OEM after all. But when the car was too much, it was difficult to get it to fall down with the slightest tilt of the ground.
I've always wanted this product, but I was hesitant to buy it because of the delivery time and the high price. However, when I inquired, I found that the delivery time seemed to come in sooner than advertised and I thought it would be more expensive after it collapsed, so I took the plunge and bought it.
The result of the purchase is Large satisfaction. The length can be finely adjusted, so I don't have to worry about customizing it in the future. I should have bought it earlier.
STAND is Material:Because it is aluminum, the powder of aluminum falls on the place where it is placed, but I don't care about it.
View detail
Too bad about the packaging!
The moment I got it in my hand and opened it Hmm? It was
The packing material is just wrapped around the Frame It was out of Frame
The Bolt part of the Frame to receive rear shock? The ball is designed to ground directly to the bottom of the ball, and if you want, you can turn the ball into a Penetrating
When the box was placed on the floor, the impact and load seemed to be thumping against the Frame and Bolt parts
Is this the kind of packaging on the Manufacturer's side, or are the packers terrible?
When I traded second-hand goods between individuals in certain auction sites, I didn't see many items that came with such terrible packaging It is not
It's not a cheap purchase, and it's a quality control thing, so you want to make sure it's done right It is
View detail
GCraft Aluminum Stand
It is for APE but installed in GROM. It is convenient because you can adjust Length. Just because GROM is heavier than other 4 mini, the tip is small, so it is a little unstable so I think I need attention when I can stop. View detail
It is sold as the item for GROM, but it is described that the switch of the side stand can not be installed.The price is about 10 thousand yen. I persuaded myself that the motorcycle parts are generally such price, but it might be a little bit expensi
It is sold as the item for GROM, but it is described that the switch of the side stand can not be installed.
The price is about 10 thousand yen. I persuaded myself that the motorcycle parts are generally such price, but it might be a little bit expensive.
When I tried to install, the direction for inserting the bolt was opposite compared to OEM product of GROM.
I realized that it was possible to install the swithch if the position of the spring hook was opposite.
I made a hole in the 180-degree opposite direction of the upper hole by the drill, cut the screw by the tap, inserted the spring fix and installed it. It's working well now.
There are two screw holes on the front side. So I'm going to find proper bolts and put them on.
The reason why I wanted to change my side stand was because my motorcycle tilted to the left side when I parked it by using the OEM side stand after installing +40 mm long swing.
View detail
It is required when an APE 100 Back-step-izes, and using a Side stands together. Although I thought whether quality would be almost the same as the product of other company, since the price was somewhat cheap, the product here was chosen. Since
It is required when an APE 100 Back-step-izes, and using a Side stands together.
Although I thought whether quality would be almost the same as the product of
other company, since the price was somewhat cheap, the product here was chosen.
Since it is satisfactory to the
function, it is dramatically satisfied with it.
View detail
It is used by the gorilla (12V). It equipped with back-step-izing. Having meat-omission-processed it, he is smart. Moreover, compared with other products, it is thick, and in the weak MONGORI system of a crankcase, if good for the oscillating
It is used by the gorilla (12V).
It equipped with back-step-izing.
Having meat-omission-processed it, he is smart.
Moreover, compared with other products, it is thick, and in the weak MONGORI system of a crankcase, if good for the oscillating measure ? reinforcement ? of a case, I will consider.
YO which is recommended.
View detail
It is attachment to Ape100. It is combination with the stand holder for back steps. The spring used the thing for cubs. When the stand of Ape was used as it was for back step attachment, the balance was likely to fall bad, but it was stabilize
It is attachment to Ape100.
It is combination with the stand holder for back steps.
The spring used the thing for cubs.
When the stand of Ape was used as it was for back step attachment, the balance was likely to fall bad, but it was stabilized by changing into Colet.
View detail
It attached to the ape 100. Although a pure stand holder will be lost by back step-ization and a stand will be attached to the engine lower part, since there was a short type of an adjustment stand when searching, since it needed to be made the quite
It attached to the ape 100.
Although a pure stand holder will be lost by back step-ization and a stand will be attached to the engine lower part, since there was a short type of an adjustment stand when searching, since it needed to be made the quite short stand, this was decided on.
That it is pleasing first falls in love with this form like the hoof of a form and a horse at first sight! Moreover, it is aluminum! It was putting into the shopping basket at the moment of seeing.
I think that it was a five stars when the price was cheap now, but he bought it also with ... (I think that it is unavoidable since it is a product made from aluminum in an adjustment type), and it was a correct answer.
View detail