Reviews
Fits: KAWASAKI Z125 PRO
Exactly to the new Crab
As the Title says, it is Exactly to brembo new Crab.
The detailed construction is also carefully finished.
View detail
brembo
It is installed for Brembo caliper installation.
There seem to be no problems with appearance, strength, etc.
View detail
Not really perfect
The quality of the bracket is good but the mounting holes for the caliper should sit lower bcoz the brake pads only attached about 70% to the disc rotor. View detail
Even with a 220mm Rotor, it hits inside
We used it for our 12-inches GORILLA
I'm using a 220mm NSR50 OEMRotor, but I'm running it at low speeds and I'm not going to be able to get the Brake When it's not being run "hang, hang, hang, hang When you brake, the sound stops
The sound didn't stop even after making sure there was no installation method or rattling, so I removed it and took a closer look at the Rotor The Pad was hitting the inner side of the friction surface of the
After all, the part that hit the Pad (about 5mm inside) was shaved off with Grinder, and the unpleasant sound was eliminated I did
It is well explained that using a Small Diameter Rotor, the outside does not contact the Rotor friction surface I have, but I've never heard of the inside being hit, so I guess you guys just don't care ?
Maybe that means OEM Caliper is still the best
View detail
Fits: KAWASAKI Z125 PRO
brembo Crab For installation!
Especially it can be used without problems, but the attached Bolt is looking emphatically or the diameter of the bearing surface is small Small anxiety.
Although it may be individual differences, because the Caliper Center is Gap, I am adjusting the Shim and using it.
View detail
If you attach brembo.
I definitely want to add Brembo caliper.
The installation precision was truly GCraft! It was perfectly patchy Pet Tan co with no insanity!
But if you complain about one thing, is the price a little expensive?
There are no complaints if it is about 2000 yen, but is it just as precise as this?
View detail
Diversion to other cars
The accuracy and shape of the product is good and looks good.
It is a convincing item for price.
This time, I diverted it to GTX 125 of CPI company and installed it, but it was not attached easily even if the installation pitch was 45 mm and same. Because considerable processing was necessary, diverting to GTX 125 is not recommended for other people.
However, compared with NORMAL, the effectiveness of Crab caliper and Touch became able to run wonderfully and reliably. I am satisfied myself.
View detail
Although he thought that he would carry out disk-ization, since it was a thing that it is compatible, it equipped as one step to disk-izing. It was good to attach exactly without a crevice.
Although he thought that he would carry out disk-ization, since it was a thing that it is compatible, it equipped as one step to disk-izing.
It was good to attach exactly without a crevice.
View detail
Fits: Others for Φ30 Fork
With [ although it worried with shift up and g-craft ] no g-craft pad processing with shift up pad processing. It is decided by confirmed at support of g-craft that he will be a manufacturer. -izing was able to be carried out [ 4p brembo ] especia
With [ although it worried with shift up and g-craft ] no g-craft pad processing with shift up pad processing.
It is decided by confirmed at support of g-craft that he will be a manufacturer.
-izing was able to be carried out [ 4p brembo ] especially satisfactorily.
I think that it will be OK if Sim is prepared once.
View detail
It was used for KSR which attached the NSR wheel. As there is explanation with the support in the case where a NSR wheel is used for the stainless of G craft by description of item, when the pure stainless is being used, as it is, the location of a ca
It was used for KSR which attached the NSR wheel.
As there is explanation with the support in the case where a NSR wheel is used for the stainless of G craft by description of item, when the pure stainless is being used, as it is, the location of a caliper does not suit, and unless it sets the center of a caliper in color, it is not attached.
He put in the color of 2.5-cm thickness between the caliper and the bolt which stops support, and the center came out of it exactly.
Since it is marketed, 3 mm in color is the thinnest, but if it is 3 mm, a rotor and a pat will hit.
He made color himself.
beginning -- although he thought that he would make support, since that is right, purchase by the goods here of a form being more beautiful and sushi reinforcement having it -- I think that it cut -- aside from [ the back ] support, although the color of the axle shaft of a wheel also followed,
Since the caliper was attached with itself only by color adjustment although it thought whether a price should just become cheap at this rate since it is unnecessary for itself, it is satisfied with itself.
View detail