Reviews
It's so cool!
To be honest, it's a little expensive for Bolt, but it's just good looking! Use Gold attribute polish regularly. "polish" It is necessary, but it is also part of the fun! Natural Brass color that is not obnoxious." It is also a high point that it does not stand out too much! It stands out casually, so you can see it many times while touring. Where do you sell it?" I recommend it to those riders who know the difference! View detail
Quantity:Set purchase is recommended.
I think it is good because it is dedicated to this product. The quality and functionality are just as I expected, and I have no complaints. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Looks perfect.
The appearance is satisfactory as there is no gap with the Frame.
expensive
View detail
Can be attached to ARAIJet helmetS-70
The visibility is good with little distortion, but when the Shield is lowered, the wind entrainment is so great that the wind received feels stronger than without the Shield. View detail
Parenthesis good
The actual Parenthesis was better than the picture.
The height, angle, etc. looked more natural than the Image.
I was having neck and shoulder pain from riding with STD Handlebar, but now I feel a little better!
My Motorcycle is OEM around Headlight and Meter, but I still think Parenthesis is better with good balance!
View detail
Easy to use and looks good
It is easy to wear and easy to handle. It is just a pity that I can't run with it up. View detail
Very windproof.
In winter, it's like the Off-Road Helmet, but cooler with the wind whipping in, but in winter...
That's why I bought it.
Expensive is an ExtremelyLarge, Fit feels good and it's cool in all black with Dark smokeSpec.
View detail
That's what I'm talking about!
Front Fender that I've been struggling with for a long time.
I was looking for Parts that have both Stabilizer function and Design.
You made the right choice with this part.
It is NORMAL-like, has Stubby functionality, and is lightweight.
However, I thought it would be easier to remove the front tire, as it is sometimes difficult to get to it for installation.
Also, is it during processing or FenderRearQuantity:Pair (for Left and Right) I was generally satisfied with the product. I am generally satisfied with the product.
View detail
A product for which one's tastes differ
[How is it used?
It is suitable for Motorcycle for complete street riding.
I wanted this one because I have been using Seesaw Pedal on all the Motorcycles I have ridden.
Was the one you received as per Image?
The image is roughly as shown in the image, but the plating process is more beautiful than I had imagined, and in a good way, I was disappointed.
Was the installation difficult?
The OEM Shift Pedal is a 10mm Hexagon Bolt and this product is a 5mm Hexagonal Wrench, so be aware that you will need two tools.
The angle of installation should be easy to use by straddling the motorcycle before bolting on, and be careful not to hit it and move it on its own.
How was your experience with it?
It can be operated with any type of shoes, so it can be ridden with leather shoes or lace-up shoes.
However, be aware that if you are used to the existing Pedal, you may end up Shift-ing on your toes.
[Included Parts:were they on?
The front and rear rubbers and mounting bolt also arrived assembled, so they can be easily replaced without modification.
[Was there anything that disappointed you?
If I had to say something, I'd say that the vehicle I'm driving is an older model, with a duller suspension.
The plating process is so beautiful that newer cars may not have it, but older cars may look a little lifted if they are not clean.
Other items that would be helpful
Point and hang of installation
The working position is very low, so it is recommended to work on the ground with a terraced ball or similar.
[Availability and clarity of the Instruction Manual
There was no Instruction Manual, but it is not difficult because all you have to do is remove the existing parts and install this product.
[Notes]
The angle of the PARTS is also changed, so the feel of the operation changes, of course.
Be aware of the changes and operate the machine while making sure it is safe.
[ITEMS TO BUY TOGETHER
I can't think of anything in particular, but it would be an area that is not often seen or touched, so it would be possible to buy inspection and cleaning tools.
[Opinions and requests to Manufacturer
Nothing in particular, but if I may say so, I think it would be suitable for older vehicles if the finish were a pear finish with a certain degree of gloss.
View detail
Goggles
Jet helmet would be easy to match and convenient for wind protection.
It is nice to hang Sunglasses on it.
View detail
Size adjustment is easy.
It is very simple to make.
I've run it in the washing machine many times, and it looks and feels just like Damage Processing.
It is good to dry it in the shade and it will be ready to use in about an hour.
View detail
Fits: その他 , YAMAHA SR500, YAMAHA SR400
The Handlebar area is neat.
I have felt that the OEM Clutch lever was too long for some time, so I replaced it with this product.
I also removed the Decompression cable at the same time, so I was able to clean up the Handlebar area quite a bit.
It is worth the price, but the texture is adequate.
View detail
Perfection
The material, rigidity, and design are perfect because it is made by ZipperBox. View detail
Nice sunglasses
The color change function is very good, it can become completely transparent in low light environment, and it will become dark brown in the sun, just like the product introduction. Driving into a tunnel or underground parking lot when the sun is strong will no longer have the embarrassment of wearing ordinary sunglasses. This would be a good functional accessory if it is a comfortable ride wearing a half helmet in the spring and summer. However, it is not fully qualified for the role of goggles, because it is not wind-proof and can not block the wind when the speed is fast. -------------------------------------------------- -------- The color change function is very good, it can become completely transparent in a weak light environment, and it will become dark brown in the sun as a product introduction. When you enter a tunnel or underground parking, you will not have a generic sun glasses. If it is a good functional accessories when wearing a half helmet in the spring and summer season. However, it can't be completely qualified for the role of the goggles, because it does not do a windproof seal, when the speed is getting up, it can't stop the wind. View detail
A must-have for Touring.
It is an excellent thing that can be hooked on the cord itself. It is a must for touring: View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
A product for a slightly different purpose, but it's an itchy one
I have a CHIC DESIGN Vintage front fender installed, and it's pretty tight Because of the tight height, I bought it as Up Stay. 18Inch Fender for 19Inch I thought it would be listed at about the same level, but if you read the description section carefully, you'll see that it's a high TireHeight one It was only made to correspond to the extent that it was made to support, and it was only about half-Inch Up in real terms
The Fender doesn't interfere with those who have a high-height Tire installed Recommendation, but if you expect 1Inch Up, as I do, it's not the right use
One-off would probably cost twice as much as this, so the price is pretty low
The bracket is thick enough to withstand the vibration of the SR400 and not break so easily I think
However, the 6-corner Nut was brilliantly not in there at all I was able to deal with it because I had a surplus at home, but I felt bad for myself for tearing the packaging prematurely without checking, but before I opened the package You should check it out carefully
View detail
Awesome
Well... this fits perfect. Great Quality and those Footpegs are so cool! Can't wait to roam the streets in style with those awesome controls! Even the Chrome has a really good quality! View detail
It saves the effort of making from materials
If it is expensive or cheap, is it a safe Gold amount or cheap one?
It is not time consuming to manually punch a hole by machining R with uniform thickness of iron plate,
Impossible.
It is prudent to additionally process based on this, even if you ordered at a Custom shop, buy and process such things
It is regular to weld.
Unlike ordinary products for surface treatment, it will rust unless it is painted after welding, so he will be nervous
It is not what I say.
Not bent - It is roughly not rusted - It is a good thing if it is not deep even if there are light scratches.
I was concerned about the search because it was not often selling, even the same thing was displayed with a different price.
View detail