Reviews
Logo will soon become Brown.
I used it for upright Fork.
I have no complaints about the product itself, such as the Tie WrapGap prevention, easy installation without removing the Tire, etc., but the Logo turns Brown quickly.
Other than that, I really have no complaints, it's just too bad.
View detail
They served their purpose well.
Product Name
Item Number
Vehicles
EXC250 KTM 2021
Number of man-hours
10 min.
Required Tools
Scissors, -Driver, Pliers, etc. would be perfect.
Why did you choose this product?
Because I wanted to protect the Seal area, etc. Also, because I was wearing something that would hit the exterior. Because I heard that this would not hit me.
Was the one you received as per Image?
It was as shown in the Image. It might be smaller than I expected.
Was the installation difficult?
It may be difficult to sow Velcro as desired.
How was your experience with it?
This is good. It protected the Seal well. It also did not hit the exterior and did not interfere with the movement of the Fork.
[Included Parts:were they on?
There may have been an Instruction Manual or something.
[Was there anything that disappointed you?
It is about the height of the price. I wish it had a little more length.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Easy to install and effective.
At first glance, I was under the impression that the structure and shape similar to the SealCover was the same as that of a car's suspension inner tube or shaft cover, which has been proven to be effective.
The suspension system located on the side of the front fender is easily affected by flying rocks, dust, and anti-freeze in winter, regardless of whether the suspension is inverted or upright.
Rival car? I heard that some people have installed it on a Rival Grom, and like the Tanax Off-road Tank Bag, I was convinced that if it can be installed on a Grom, there would be no problem with the Z.
I immediately installed it on my Z. The size, operating range, and external appearance were also very impressive, and it also has a bit of a custom feel.
Tube and gap on underside (Dare to use the adjustment width to install the gap to Large size) The company has considered ventilation and maintenance by creating a
Periodic inspection and cleaning is required, but it is easy to install and should not be a bother.
It is made of thick Neoprene, so it may be durable depending on maintenance.
Anyway, the Seal portion is now Covered, and Seal protection is definitely more promising than nothing.
I have no doubt that Tube is also effective in preventing Wound.
View detail
I knew it ….
I think the Fork seal will be protected. (The seal is hidden, so it needs to be removed and checked occasionally.)
White logo marks will soon turn brown.
View detail
Fallen cannibals
I don't plan to drive off-road, but I installed it as an insurance policy because it has an inverted front fork and is troublesome to work on.
The work is easy because it is a wrap around Tie Wrap Fixing.
It is good because it can be one point of design.
If it's leaking inside, you can't check it, so you might want to take it off and look at it periodically.
View detail
Inner Tube
Inner Tube is purchased because it is naked, and it is Repeat because it was such a car model before.
It will last longer if you cure it with Silicon spray from time to time.
View detail
That's enough.
Used for REBEL 1100.
The REBEL 1100 does not have Fork Boots.
I tried the serpentine Boots, but it doesn't have a Size.
So I tried this.
I used it on a car I've owned. I used it in a bad way and it was don perfect.
When you put it on, it's hang to pull it up and spread it out.
After installation, it is good to spray Silicon spray from time to time.
View detail
Impressions after use (CRF250M[MD44])
kriega Fork Seal Covers for CRF250M F upside down suspension (Inner Tube Diameter 43mm) mounted on
good point
The product is equipped with a ring to pass the Tie Wrap for fixing, so it is easy to fix to the suspension.
As the purpose of the fork seal protection, the dimensions of the product are just right.
The body of the product is flexible and easy to roll along the unevenness of the fork.
Magic tape for winding is very strong.
It does not interfere with the movement of the suspension when installed. (Personal Comment.) *
Inadequacy
I feel the price is too high for a product that only has Magic tape and a small amount of decoration on Neoprene material.
Wipe and clean the suspension and spray Silicon spray on the inside of the product to reduce friction before installing.
------------------------------
Before using this product, I used another company's fork skin which has longer size than this product, and it was suitable to protect Inner Tube, but when I think about the fact that material is crushed when suspension stroke becomes deep, this product which specializes in protecting fork seal is better. But this product is better to protect the fork seal.
View detail
Satisfied
In the event that you have any questions regarding where and the best way to get in touch with us, please do not hesitate to contact us. View detail
Great product
These fork seal covers are just great. They are very durable, stylish, easy to mount and fit virtually any type of fork seal. View detail
Fork oil life is extended to Large width
The Seal of Front fork is basically a double-layered structure.
On top of the oil seal to prevent oil leaks, there's a dust seal to prevent dirt from getting in from the outside.
The kicker is that we want to extend the life of the Fork oil by making it even more protective and triple-layered.
The result was a Large success.
It's originally intended for people who run Dirt, but it's also perfect for people who want to extend their MaintenanceCycle.
In the past, the cycle of changing Fork oil was once a year, and it was natural for it to get muddy every time it was changed.
After Krieger's Fork seal, Oil remained a clear pink color.
If this is the case, you might be able to extend the replacement Cycle to once every two years.
The Fork Guard must be removed prior to installation on the TDM900.
Because this was quite hard, it was Large strange, or rather, when it pried forcefully with a Slotted screwdriver, part of the paint came off.
You might want to warm it up with heat and then remove it, or cut it in parts.
If you remove the Fork Guard, you may have some concerns about flying rocks, but this Fork Seal is also a solid seal.
Since it is Neoprene, I think it will be Large sturdy as long as it doesn't fly around too much.
This product looks like it's for inverted suspension, but it can be used for upright suspension as well.
The Design (K in Krieger) is upside down, but I don't think it's functional.
Crack has come into the Neoprene fabric after about two years of use, so the durability is about three years.
In fact, the largest Merit of this one is a combination of the Fork seal from Other Brand Product.
I have SKFSeal in my TDM900, which is a good thing because Friction is so much lighter.
The Demerit of the Other Brand Product Seal is looser than the OEM Seal.
It may be that it is easy to break in. Krieger's Fork Seal can make up for this shortcoming.
If I can get the Front fork to work better and extend the maintenanceCycle, it will be perfect.
Fork oil is a Large strange thing to change, and it costs a lot of money to take it to the shop.
I'm sure many of you haven't replaced it much.
Damper's effectiveness gets progressively worse, so you get used to it without even knowing it.
Just by changing the oil, your entire motorcycle will look different.
"I'm aware of the maintenance benefits, but it's only the first time you'll see the benefits.
"I'll just have to be patient and keep riding rather than repeat the maintenance.
If you think that this is a good idea, Recommends a triple Sealization.
I think you can easily prolong the life of your ideal condition.
If you don't care about the look, it's probably Fork Boots that cover the whole thing.
Motorcycle is not as protected as a car, so I think it's better to take action.
View detail
GREAT FOR ENDURO MOTORCYCLE.
When I use it for a while I have tried cleaning the front shock absorber of my motorcycle. I think it's doing its job well. It can prevent debris or debris that can escape within the shock absorber. Which makes it possible to prolong the cleaning of the shock absorber. View detail
BEST FORK SEAL COVERS
After I unpack the product and try to catch it. I feel very good quality material. It fit my KTM 1190 ADV. I think it could fit in all models with upside down fork. I think it will be good enough to prevent forks seals. It's a product that every motocross and adventure bike should be installed. View detail