Reviews
difficult to order
The products are normal. The only thing is that the search for products is confusing, I thought I ordered a Stone wash, but it turns out to be a Stone wash.
Black came. It's my fault that I misunderstood by the picture.
View detail
Absolute peace of mind
I am 168cm, 62kg and I chose 32-inchesAsianFitSlim, the Waist is a little roomy and the hem length is perfect. I am a little worried about the tank getting scratched because of the convexity of the Rivet. I wish the design of the waist Labeletc. was a little more elaborate, since it is not cheap. View detail
If you're looking for a cospa
I was worried about SHOEI's product, but decided to go with this product for its cost performance.
It may be a little small, but since it is used as a Helmet Pillow, I don't think it will be a problem.
View detail
Safety in case of emergency.
I bought it hoping for the strength of the fabric. 。
I am 172cm, 66kg and I chose 32-inches and the waist is just right.
Pads can also be worn without much discomfort.
Compared to the 56Design RidingJeans that I own,
Waist is a bit larger than 56Design's M Size and a bit smaller than L Size.
The weight is also heavier than the 56Design ones, but when you put them on, the weight doesn't bother you so much.
The fabric also felt softer than I expected.
StraightMODEL, the width of the armpits is wide, so it will feel loose for those with narrow feet.
If it gets cold and you wear InnerTights or something, it's just the right width.
View detail
Jeans for Motorcycle
I am W31 and 76 and LEVIS Jeans fits me perfectly, so I was torn between AsianFit Slim and AsianFit Slim Plus, but I decided to go with AsianFit Slim (Stone wash) W32 because Plus has a 5cm longer hem.
The fabric is a little thicker than LEVIS and the hem width is the same, but it is not stiff and has a little stretch, so there was no discomfort at all. The position of the knee and hip pad was also good. I was worried about the color fading, so I washed it once. As a result, the color faded a lot, so you should be careful until you get used to it.
Boots because the hem is pulled slightly upward when straddling the Motorcycle. (12cm high) The number of the gills will go up to the gills of the
If you have SlimPlus, you would be covered, but it would be a matter of preference, as long as the knee pad is in the right position.
I will use it with long boots, so I am happy with it.
View detail
A stand for drying the interior with a fan
Purchased for a platform for drying Helmet's interior at Garage.
To the touch, it feels like it contains buckwheat straw used for pillows.
The outer diameter is smaller than expected and the helmet is not as stable as expected, but there are no problems when using it.
View detail
I think it deserves to be more famous.
The deciding factor in the purchase
I decided that if I was going to buy something, I wanted to buy something with solid defensive performance, so I chose this product, which is CE StandardAA” as it is equipped with not only knee but also hip butt Protector and has the product feature "Jeans (not only Protector is CE compliant).
In addition, many bottoms for Motorcycle have only out-of-problem sizes, such as Waist from 80cm and inseam in the 70cm range, but the deciding factor was that the SSize for this product has Waist from 76cm and inseam 81cm available.
Also, the fact that Urethane is not used for Material is also a high point.
Was the one you received as per Image?
Although it says "Stone wash", it is actually a one-wash color (normal dark blue).
This is the color I like, but if you expect the Damage feeling typical of Stone wash or the light blue of the product page, you will be disappointed.
[How did you feel about the Fit?
Waist is listed as 76cm-82cm, but I think it is Oversized if you expect a Waist of 76cm because it is not a type that can be stretched to accommodate.
Probably Waist 80cm is the appropriate Size.
On the other hand, the Hip area tends to be Exactly around the Hip with the Butt Protector attached.
The buttocks are tighter and it is harder to put things in and out of the pocket (although it is not cool to put things in Jeans' pocket in the first place and have the silhouette collapse).
I think the deeper crotch is to prevent the Rivet from hitting the body when riding a motorcycle and the front pocket from hitting the body, but personally I think it is too deep.
How was your experience with it?
The knee Protector is flexible and does not interfere with bending the knee, which is great.
There is no Protector position adjustment function, but this is apparently because it would not pass the ECE Standard if there is an adjustment function due to the possibility of gapping when falling down (that's why they offer products with different lengths instead of hemming).
For this reason, the bag that holds the Protector is not made of mesh, but a solid piece of fabric.
It looks hot in summer, but when I put them on, I didn't notice much difference (I'm not sensitive to heat in the lower half of my body, but maybe I'm just insensitive?)
I think it dries easier than regular Jeans because it is made up of half synthetic fibers. (It does not dry quickly like a quick-drying Material, but only compared to 100% cotton Jeans. Basically, it is hard to dry)
[Was there anything that disappointed you?
The bag for the knee protector is sewn together with the seam of the Jeans, which makes the seam less noticeable, but this makes the seam thicker and less carefully sewn, which makes it stiff.
The thickened stitches can then become protruding as the knee bends, and when this happens, the protrusion is held down by the knee during the knee grip, which is painful.
I think it is also due to the fact that I have a surplus of fabric at the lower end of my Size range, but there is room for improvement here.
How did it compare to other products?
Shirring and Protector parts are conspicuous, and there is none of the tackiness that is typical of Jeans for motorcycles.
【Included Parts:presence or absence】.
A thick Instruction Manual in multiple languages was included with each Jeans and Protector, and even a storage bag for the Protector.
I wonder if this kind of place is unique to European Manufacturers.
[Opinions and requests to Manufacturer
I would like to have another One SizeSmaller size, and the seams in the knee area could be improved.
View detail
I think it's good
The fit was good, but the belt loop in the back came off when I squatted down once, so I'm a little concerned about the sewing. View detail
Getting in and out of Motorcycle has become so much easier!
I bought it because I wanted a Jiichins Type.
If I was going to buy something, I wanted something that would stretch and contract to make it easier to get on and off the Motorcycle.
I'm glad I chose StraightFit for the size too!
View detail
Best Denim
It says "slim fit," but the shape is a little roomier than skinny, somewhere between skinny and straight.
I am 164cm53kg and MOUSSY's Denim is basically a 24 inch, so size 8 was just right for me.
That said, MOUSSY's Denim is quite snug, but this Denim had a little more room overall, so if a 7Size existed, a 7Size would have been fine.
If you are slender and thin, you may feel Large even if you are 8Size….
The length is also short for a motorcycle denim, so I think it would be short for tall people with long legs. I have rather short legs, so it didn't bother me that much.
The Knee Protector did not make it difficult to squat, and it was easy to move around.
By the way, Knee Protector is a Type that is inserted from the inside.
The waist protector makes my hips look large, so I removed it because I originally have large hips.
On the other hand, if you have small buttocks, I think you will be able to style up your buttocks if you put them in.
The design does not look like a motorcycle denim at a glance, the texture is good, and I like it so much that I wanted to get a different color.
View detail
If you don't put a knee Protector in it, you can use it for everyday use.
If you don't put Protector, it looks like normal Pants.
The size is made loosely and stretches well.
If you are a slender person, we recommend purchasing One size smaller.
View detail
Spec. change
I was using a clicker for Motorcycle, so I thought it would be convenient to use the same Case.
As for installation, I was able to install it by pushing it in to the extent that Air-conditionerBent was not broken. Because I think that there is a case that it doesn't fit, it is necessary to consider it carefully.
I'm very pleased with the quality and the fact that the clip is tight and there are two of them, so I'm not worried about it rattling.
Note that the position of Lever to lock the Case in Spec. change is different from the Image image because it has become vertical from the horizontal orientation. I think that it is not a problem if you get used to using it.
For the following inquiries
I spent an inconvenient day without using it because I was planning to return it and I hadn't heard anything for almost a month;
I don't know if it's the slowness of Webig or the slowness of the Manufacturer, but if they claim to be able to respond in an average of 5-7 business days, I would have liked to at least be informed of the progress.
View detail
It is indeed different from Lee Vise.
I wear 32-inches on a daily basis, but when I tried them on, the Protector at the waist was quite thick, so I went with the 34-inches; I wish there was a 33-inches setting.
At first when I walked, the Protector on my knee felt quite uncomfortable, but after wearing it for half a day, I became quite familiar with it.
It's very hot in the middle of summer, when I'm riding my motorcycle it's still good, but when I walk it gets very hot and stuffy.
Compared to Jeans with Protector from other companies, it is quite sturdy and has a high sense of safety, but it does not have the comfort of Lee Vise as expected.
I think the best thing about Protector is that it's not noticeable.
View detail
It's not a Lee Vise indeed.
The size is usually 32-inches, but I bought 34-inches. 32 was too tight because Side Protector is quite thick. 33 would be just right.
When I wore them new, I felt quite uncomfortable with the Protector on my knee when I walked, but I got used to them after wearing them for half a day.
It is hot in summer. When running, it is good, but when walking, it is hot and it steams. The ProtectorPocket of the knee was Mesh in Catalogue, but the purchased product is a thick cloth, and Protector seems to protect it more surely than Jeans with Protector of other companies.
It's not a Lee Vise by any means, but it's a good product for safety.
View detail
The tacks aren't great.
It looks like reinforced fibers are woven into the fabric, but the texture and comfort are the same as regular Denim.
The Slim fit seemed to only allow Boots in, so I went with the Straight.
Usually Denim selects 32-inches as well with 32-inches, Size feeling is not changed.
It has a waist pad so it feels a little Tight around the waist.
At 178cm 65kg, it was just right, and the hem was Large sturdy as it was.
The Pocket of the Pad is a type that closes by folding back without using Velcro, so the feeling of wearing is good, but the position cannot be adjusted.
The Knee Pad is flexible, not like Komine's Kachicachi guy, but it does feel a bit protruding when you squat.
It would have been better if the coin pocket was on the opposite side like KUSHITANI, but since it is as it is, you have to be careful not to hit the body of the car when handling it.
View detail
Jeans for everyday wear
I bought size 10 for my 165cm and 57kg. I have thicker thighs and they fit me perfectly but the protector in the knee but not the waist. I need to lose some weight. View detail