Reviews
Fits: SUZUKI Gixxer 150., SUZUKI Gixxer 150., SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125S
The full set is called (・∀・) I like it!
I bought this full set for my ADDRESSV125 for commuting, I could have bought the OEM product, but it was too much trouble to find the part number.
I am very satisfied with the quality of the product.
Also, with a full set, you don't have to buy O-ring and Drain Washer !!!! It's very convenient.
View detail
Fits: SUZUKI ADDRESS V125, SUZUKI ADDRESS V125, SUZUKI ADDRESS V125, SUZUKI ADDRESS V125
This should also be replaced periodically.
I'm sure everyone checks and changes the air cleaner frequently, but don't forget to check the CaseFilter as well.
If it is clogged, it will not be able to cool the drive train parts smoothly, and it will cause heat build up in the drive train, which may cause problems. We recommend you to replace the parts frequently.
View detail
Fits: HONDA XL250S L250S, HONDA NY50 All models, HONDA CROSSCUB110 JA10, HONDA All models of GIORNO CREA AF54, HONDA SUPER CUB 110 JA10, HONDA SUPER CUB 110 PRO JA10, HONDA SUPER CUB series Engine cars (50-100cc), HONDA SUPER CUB series Engine car FI, HONDA Spacy50 All models, HONDA DREAM50 AC15, HONDA Spacy80 All models, HONDA VARIE All models, HONDA MONKEY series Engine cars (50-100cc), HONDA MONKEY series Engine car FI
Is there good and bad in Gasket?
I'm a little skeptical that there is any good or bad in Gasket.
I can use any Brand with no problem. Especially the exhaust system.
This Gasket was a good example of this and the exhaust was not leaking.
If something goes wrong because of this, it should be suspected of a vehicle problem.
View detail
Fits: HONDA Smart Dio, HONDA ZOOMER [Ruckus], HONDA BITE, HONDA CREA SCOOPY, HONDA CREA SCOOPY I, HONDA SMARTDio DX, HONDA SMARTDio Z4
Buy it anyway.
Due to the OEM Equivalent Product being out of stock, I decided instead on the only condition that the price was lower than the original planned purchase price. It doesn't interfere with installation, but the quality of the Filter seemed thin and the Filter function was minimal.
On the other hand, does it lighten the resistance of the inhale? It can also be taken as.
View detail
Fits: SUZUKI Address 110 CE47A, SUZUKI Address 110 4st, SUZUKI Address 110 4st
Perfect Full set
Last time and the last two times I used it, I only had to replace the filter. View detail
Fits: HONDA Super Cub 50, HONDA cross-cub 110, HONDA Cross Cub 50, HONDA Super Cub 110-Pro, HONDA Super Cub 50-Pro, HONDA Super Cub 110
Satisfied
It took about 2 months from waiting to be delivered, but the quantity of the complete set with each O-Ring has been:Full set of CUB Oil Filter is the best. View detail
Fits: KAWASAKI Eliminator 400LX, KAWASAKI ZRX1100, KAWASAKI ZR-7, KAWASAKI ZR-7-S, KAWASAKI ZRX1200R, KAWASAKI ZRX1100-II, KAWASAKI ZZ-R250, KAWASAKI ZZ-R1200, KAWASAKI ZRX1200S, KAWASAKI Z400FX, KAWASAKI GPZ400R, KAWASAKI Eliminator 400, KAWASAKI Eliminator 400SE, KAWASAKI Eliminator 400, KAWASAKI GPX750R, KAWASAKI GPX250R-II, KAWASAKI FX400R, KAWASAKI NINJA2 Helmet50RR, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750-RS
OEM Equivalent Product
The Full set of engine oil and oil filter replacement is very helpful. This Quantity:It's easier than ordering the OEMs one by one. View detail
Fits: HONDA READ 125 Model: NHX125D-F Frame number: JF45-1000001-, HONDA Dio 110 Model: NSC110WHB Frame number: JF31-1000001-, HONDA Sh Mode 14 Model: ANC125E Frame number: JF51-1000001-, HONDA Sh Mode 14 Model: ANC125E Frame number: JF51-1000001-
As OEMLever's for Replacement
Purchased as an OEMLever for Replacement.
The OEMLever had a squeaky feeling after maintenance, so I replaced the PivotBolt with a new one as well.
After the exchange, the fee ring is better and I feel good.
The quality and shape of the product is the same as the OEM product.
View detail
Fits: KAWASAKI ZZR250 EX250-H15-H7F FNo: EX250H-A18402-, KAWASAKI ZZR250 EX250-H15-H7F FNo: EX250H-A17453-A18401, KAWASAKI ZZR250 EX250-H15-H7F FNo: EX250H-000001-, KAWASAKI ZZR250 EX250-H13 FNo: EX250H-A18402-, KAWASAKI ZZR250 EX250-H13 FNo: EX250H-A17453-A18401, KAWASAKI ZZR250 EX250-H13 FNo: EX250H-000001-, KAWASAKI ZZR250 EX250-H10 FNo: EX250H-A18402-, KAWASAKI ZZR250 EX250-H10 FNo: EX250H-A17453-A18401, KAWASAKI ZZR250 EX250-H10 FNo: EX250H-000001-, KAWASAKI ZZR250 EX250-H1-H10 FNo: EX250H-A18402-, KAWASAKI ZZR250 EX250-H1-H10 FNo: EX250H-A17453-A18401, KAWASAKI ZZR250 EX250-H1-H10 FNo: EX250H-000001-, KAWASAKI ZZR250 EX250-H1 FNo: EX250H-A18402-, KAWASAKI ZZR250 EX250-H1 FNo: EX250H-A17453-A18401, KAWASAKI ZZR250 EX250-H1 FNo: EX250H-000001-, KAWASAKI ZZR250 EX250-H15-H7F FNo: EX250H-A18402-, KAWASAKI ZZR250 EX250-H15-H7F FNo: EX250H-A17453-A18401, KAWASAKI ZZR250 EX250-H15-H7F FNo: EX250H-000001-, KAWASAKI ZZR250 EX250-H13 FNo: EX250H-A18402-, KAWASAKI ZZR250 EX250-H13 FNo: EX250H-A17453-A18401
It is the same as the OEM new product.
The performance is the same as that of the OEM product, so you can use it at ease. View detail
Fits: SUZUKI DF125 E SF44A All models, SUZUKI DF200 E SH42A All models, SUZUKI DR125S All models, SUZUKI BANDIT1200 GV79A, SUZUKI BANDIT1200 S GV79A, SUZUKI BANDIT 1250 F GW72A, SUZUKI BANDIT 1250 GW72A, SUZUKI BANDIT 1250 S GW72A, SUZUKI MARAUDER125 NF48A All models, SUZUKI SKYWAVE250 CJ41A, SUZUKI SKYWAVE250 CJ42A, SUZUKI SKYWAVE250 CJ43A, SUZUKI SKYWAVE250 CJ44A, SUZUKI SKYWAVE250 CJ46A, SUZUKI SKYWAVE250 S CJ41A, SUZUKI SKYWAVE250 S CJ42A, SUZUKI SKYWAVE250 S CJ43A, SUZUKI SKYWAVE250 S CJ46A, SUZUKI SKYWAVE250 S CJ44A, SUZUKI SKYWAVE250 SS CJ43A
This is a normal exhaust gasket with no special features
This Exhaust Gasket is an essential part of the Exhaust System replacement.
It's basically just Gasket, not something that makes a difference in performance, so there's nothing to worry about.
The price is reasonable, so you can buy a couple at a time and keep them for the next time you reassemble. You can save on shipping costs and it doesn't matter how many pieces you buy because they are not bulky items.
View detail
Fits: HONDA XL250S L250S, HONDA NY50 All models, HONDA CROSSCUB110 JA10, HONDA All models of GIORNO CREA AF54, HONDA SUPER CUB 110 JA10, HONDA SUPER CUB 110 PRO JA10, HONDA SUPER CUB series Engine cars (50-100cc), HONDA SUPER CUB series Engine car FI, HONDA Spacy50 All models, HONDA DREAM50 AC15, HONDA Spacy80 All models, HONDA VARIE All models, HONDA MONKEY series Engine cars (50-100cc), HONDA MONKEY series Engine car FI
one pack
I used it on my Loncin 125.
There are a lot of two packs, but since it's a single cylinder, I only needed one, so it was just fine.
No exhaust leaks and good cost performance.
View detail
Good Oil Seal
Haven't tried installing yet. Outwardly, it looks normal. It came quickly. I will bet on the Honda Ape.し ん た に 設置 し ま す。 正常 に 見 え る。 そ れ は す ぐ に 来 た。 私 は ホ ン ダ AP に 賭 け ま す。 I haven't tried installing it yet. Looks normal. It came quickly. I'll bet on a Honda APE. Ana olokhtuur naadata suoh. Taһyttan kөrdөkhkhө nuorma Kurduk. Oroydootubut. Ep honugar turuoruom is in Yakut. View detail
Fits: HONDA SUPER CUB 50, HONDA MONKEY125, HONDA SUPER CUB110, HONDA SUPER CUBC125, HONDA glom, HONDA DAX125, HONDA SUPER CUBC125
Replacement recommendations
It's been 40,000km since I replaced the hub damper when I delivered the car. I changed the front/rear brake shoes at the same time. I remembered again how impressed I was with the last replacement. I need to replace it regularly because it's worn out even if you can't see it. View detail
Fits: HONDA CRF250L, HONDA CBR250 R (MC41) FNo:MC41-1400001-, HONDA CBR250 R (MC41) FNo:MC41-1200001-, HONDA CBR250 R (MC41) FNo: MC41-1000001-1099999, HONDA CBR250 R (MC41) FNo:MC41-1400001-, HONDA CBR250 R (MC41) FNo:MC41-1200001-, HONDA CBR250 R (MC41) FNo: MC41-1000001-1099999
Used on CB250R
I couldn't find the OEM product number, so I decided to buy this product with the same type of engine that is compatible with this product.
I bought it at the same time as replacing the oil filter.
No leaks, so let's call it good.
View detail
Fits: SUZUKI Address 110 CE47A, SUZUKI Address 110 4st, SUZUKI Address 110 4st
For initial maintenance.
I bought it because my ADDRESS110 2020 had to be serviced initially.
With a minimum of tools, I was able to do the Oil change myself as it was easy to do.
What you need to replace the oil filter is Quantity:It's very kind of a set.
View detail
Fits: YAMAHA TW200 E 4CS All models, YAMAHA TW200 E 5LB All models, YAMAHA SEROW225 4JG, YAMAHA BRONCO 5BT, YAMAHA SEROW225 5MP, YAMAHA TW225E 5VC All models, YAMAHA TW200 E 2JL All models, YAMAHA TW200 5LB All models, YAMAHA TW200 4CS All models, YAMAHA TW200 2JL All models, YAMAHA SEROW225
Full set is easy.
It contains all sorts of things related to oil changes, such as filters and gaskets.
You'll have a hard time trying to buy these things RoseRose, so Quantity:I'm just thankful that it's a set.
It's easy to use.
It's not that hard, so if you're not sure, I suggest you try it.
View detail
Fits: YAMAHA JOG [Jog]-DX, YAMAHA JOG [jog]., YAMAHA JOG-ZR [JOG] 4-stroke 3P3 All models, YAMAHA VINO [Vino] 4-stroke 4-stroke 13P All models, YAMAHA VINO [Vino] 4st 5st All models, YAMAHA VINO [Vino] 4st FI 13P All models, YAMAHA VINO [Vino] 4st Morphe 37B All models, YAMAHA JOG [Jog]-DX, YAMAHA JOG [jog]., YAMAHA JOG-ZR [JOG] 4-stroke 3P3 All models, YAMAHA VINO [Vino] 4-stroke 4-stroke 13P All models, YAMAHA VINO [Vino] 4st 5st All models, YAMAHA VINO [Vino] 4st FI 13P All models, YAMAHA VINO [Vino] 4st Morphe 37B All models
It's easy to replace.
It's not an OEM Product, but it's easy to install, does it well, and I have no complaints. I can't judge the durability at the moment, but I think it's good. View detail
Fits: KAWASAKI Z125-PRO BR125H, KAWASAKI KLX125 LX125C All models, KAWASAKI D Tracker 125 LX125D
There is a problem with the enclosed oil seal.
Both LargeSmall ORing (Oil seal) and Exactly Large (OIL seal) are somewhat large. It doesn't fit. (About 0.5 to 1mm.)
I've seen it in other people's reviews. Do you think it will get stuck in after it's chilled?
View detail
Fits: SUZUKI ADDRESSV100 [ADDRESS]., SUZUKI ADDRESSV100 [ADDRESS]., SUZUKI ADDRESSV100 [ADDRESS]S
It can be used as a NORMAL interchangeable product.
Because Oil was attached to the hand during installation, the photograph was not taken, but NORMALAir was installed without a gap. We were able to install it in the cleaner box.
It's a motorcycle that's more than 10 years old since it was new. "The cleaner sponge itself is deteriorating. It's possible, so I took the plunge and replaced it.
Replacement does not change the performance. It might be Camouflage that had not deteriorated. (Taki sweat)
The original cleaner sponge that was included in the package was black, and this product also has a black sponge. It's black, so I can't really tell how dirty it is for me.
It's not such an expensive part, so it's probably best to replace it regularly.
View detail
This is a quality O-ring.
I bought this for maintenance of my GB250 CLUBMAN. I bought it for Oil Filter installation which I purchased at the same time. It had a ring on it, so I didn't have to use it. As far as things are concerned, I think the quality is good. View detail