![icon-webike.png](https://thimg-afcc.kxcdn.com/@wth-shop/assets/desktop/img/icon-webike.png)
Reviews
![Shroud-Engine,L.GR Side cowl](https://img.webike-cdn.net/catalogue/images/67417/491325461290-131792627391040833_TS.jpg)
Fits: KAWASAKI KX450
Purchase recommended while parts are available.
[How is it used?
I purchased this product to refresh the exterior of my KDX220SR, which had become crusty due to UV rays and age-related deterioration.
Kawasaki OEM Parts already has an exterior other than light cowl. Discontinued. I was wandering around Webike's site and found this product, so I ordered it immediately! Thank you very much.
Did you receive the item as per the Image?
I heard that originally you could choose between Lime green or White, but now only White is on the lineup... I must be grateful just to be able to get the exterior of a Motorcycle that is 20 years old.
Was it difficult to install?
It is a completely simple process and is simply installed in the reverse order of the OEMShroud that was removed from the vehicle body.
How did you like it?
The design is the same, so nothing has changed in terms of functionality, but as I mentioned above, my vehicle had a crusty exterior, so it is now beautiful to look at.
It is a world of complete self-satisfaction, but I am happy just looking at my car in its Beauty exterior.
Was "Included Parts:" attached?
Quantity:Pair (for Left and Right) Side cowl of Quantity:This is a 1 Set only product, with no Included Parts:or Instruction Manual.
Were there any disappointments?
Nothing, I want a Shroud with the same design as the OEM Product." was the hope, so it is sufficient.
Other items that would be helpful
Point and hang of installation
In a sense, this product is also like OEM parts, so there is no hang or anything, but it is definitely better to temporarily assemble the product and adjust the overall adjustment before fixing it in place, just to be sure.
In my case, Side cowl, Rear Fender and Fuel Tank are Other Brand Products. I checked if the gap was not too wide, or if the distortion was not too much, etc., before fixing them in place.
[Availability and clarity of the Instruction Manual
No Instruction Manual, no, but as noted above. All you have to do is remove the same type of parts that were originally installed and install them in the same way." Therefore, an Instruction Manual will not be necessary.
[Notes]
Nothing in particular, but if it is an Other Brand Product Screw holes won't fit." As I mentioned above, this is a situation that can happen on a rather regular basis. "Temporary group." Check the individual balances carefully in the following table, and make modifications as necessary to ensure that they are installed properly.
[ITEMS TO BUY TOGETHER
Since the motorcycles themselves are more than 20 years old, sales of OEM parts as well as other brand products are about to end.
It may be a good idea to replace what you can while you can afford it! (including keeping it Stock).
[Opinions and requests to Manufacturer
As a Minor car enthusiast, I would appreciate it if you could reproduce the product from time to time, even if it is only after orders have accumulated.
View detail
![Shroud-Engine,L.GR Side cowl](https://img.webike-cdn.net/catalogue/images/67417/491325461290-131792627391040833_TS.jpg)
Fits: KAWASAKI KX450
As expected of an OEM product, the precision is perfect.
[How is it used?
I purchased this product to refresh the exterior of my KDX220SR, which had become crusty due to UV rays and age-related deterioration.
Kawasaki OEM Parts already has an exterior other than light cowl. Discontinued. I was wandering around Webike's site and found this product, so I ordered it immediately! Thank you very much.
Did you receive the item as per the Image?
I heard that originally you could choose between Lime green or White, but now only White is on the lineup... I must be grateful just to be able to get the exterior of a Motorcycle that is 20 years old.
Was it difficult to install?
It is a completely simple process and is simply installed in the reverse order of the OEMShroud that was removed from the vehicle body.
How did you like it?
The design is the same, so nothing has changed in terms of functionality, but as I mentioned above, my vehicle had a crusty exterior, so it is now beautiful to look at.
It is a world of complete self-satisfaction, but I am happy just looking at my car in its Beauty exterior.
Was "Included Parts:" attached?
Quantity:Pair (for Left and Right) Side cowl of Quantity:This is a 1 Set only product, with no Included Parts:or Instruction Manual.
Were there any disappointments?
Nothing, I want a Shroud with the same design as the OEM Product." was the hope, so it is sufficient.
Other items that would be helpful
Point and hang of installation
In a sense, this product is also like OEM parts, so there is no hang or anything, but it is definitely better to temporarily assemble the product and adjust the overall adjustment before fixing it in place, just to be sure.
In my case, Side cowl, Rear Fender and Fuel Tank are Other Brand Products. I checked if the gap was not too wide, or if the distortion was not too much, etc., before fixing them in place.
[Availability and clarity of the Instruction Manual
No Instruction Manual, no, but as noted above. All you have to do is remove the same type of parts that were originally installed and install them in the same way." Therefore, an Instruction Manual will not be necessary.
[Notes]
Nothing in particular, but if it is an Other Brand Product Screw holes won't fit." As I mentioned above, this is a situation that can happen on a rather regular basis. "Temporary group." Check the individual balances carefully in the following table, and make modifications as necessary to ensure that they are installed properly.
[ITEMS TO BUY TOGETHER
Since the motorcycles themselves are more than 20 years old, sales of OEM parts as well as other brand products are about to end.
It may be a good idea to replace what you can while you can afford it! (including keeping it Stock).
[Opinions and requests to Manufacturer
As a Minor car enthusiast, I would appreciate it if you could reproduce the product from time to time, even if it is only after orders have accumulated.
View detail
![Shroud - Engine, L.GR Side Cowl](https://img.webike-cdn.net/catalogue/images/67417/491325460290-131792626728998515_TS.jpg)
Fits: KAWASAKI KX450
Buy while you can get it.
[How is it used?
I purchased this product to refresh the exterior of my KDX220SR, which had become crusty due to UV rays and age-related deterioration.
Kawasaki OEM Parts already has an exterior other than light cowl. Discontinued. I was wandering around Webike's site and found this product, so I ordered it immediately! Thank you very much.
Did you receive the item as per the Image?
I heard that originally you could choose between Lime green or White, but now only White is on the lineup... I must be grateful just to be able to get the exterior of a Motorcycle that is 20 years old.
Was it difficult to install?
It is a completely simple process and is simply installed in the reverse order of the OEMShroud that was removed from the vehicle body.
How did you like it?
The design is the same, so nothing has changed in terms of functionality, but as I mentioned above, my vehicle had a crusty exterior, so it is now beautiful to look at.
It is a world of complete self-satisfaction, but I am happy just looking at my car in its Beauty exterior.
Was "Included Parts:" attached?
Quantity:Pair (for Left and Right) Side cowl of Quantity:This is a 1 Set only product, with no Included Parts:or Instruction Manual.
Were there any disappointments?
Nothing, I want a Shroud with the same design as the OEM Product." was the hope, so it is sufficient.
Other items that would be helpful
Point and hang of installation
In a sense, this product is also like OEM parts, so there is no hang or anything, but it is definitely better to temporarily assemble the product and adjust the overall adjustment before fixing it in place, just to be sure.
In my case, Side cowl, Rear Fender and Fuel Tank are Other Brand Products. I checked if the gap was not too wide, or if the distortion was not too much, etc., before fixing them in place.
[Availability and clarity of the Instruction Manual
No Instruction Manual, no, but as noted above. All you have to do is remove the same type of parts that were originally installed and install them in the same way." Therefore, an Instruction Manual will not be necessary.
[Notes]
Nothing in particular, but if it is an Other Brand Product Screw holes won't fit." As I mentioned above, this is a situation that can happen on a rather regular basis. "Temporary group." Check the individual balances carefully in the following table, and make modifications as necessary to ensure that they are installed properly.
[ITEMS TO BUY TOGETHER
Since the motorcycles themselves are more than 20 years old, sales of OEM parts as well as other brand products are about to end.
It may be a good idea to replace what you can while you can afford it! (including keeping it Stock).
[Opinions and requests to Manufacturer
As a Minor car enthusiast, I would appreciate it if you could reproduce the product from time to time, even if it is only after orders have accumulated.
View detail