Reviews
Thank you!
I am satisfied with the quality. View detail
It helps:??
The texture is good, and the various lengths are very helpful. View detail
As a replacement for out-of-print OEM Products
Both Inner and Outer are the same length, so replacement from OEM Product is not a problem at all.
I have a Made by HURRICANE Handlebar Up Spacer, and since the OEMWire was fine with the NORMAL length, I ordered the NORMAL length for this one and installed it as well.
If I had to say so, I feel that the adjuster at the WireCenter is just a little closer to the Handlebar side, but it is only a fewmm level, so I don't mind.
After the replacement, it is a little lighter? The only difference is that the weight is a little lighter after replacement. So, it may not be as impressive as replacing the Throttle Wire.
View detail
xlr250r md22 Throttle Wire replacement
The length etc...it fits nice.
Now we will check the durability.
View detail
It is an ordinary Cable.
These are the PARTS that were replaced when the car was delivered.
I didn't have time to order OEM so this was in the store's inventory.
Only replace existing Throttle Wire.
Axel works well and is comparable to OEM.
good point
● OEM same etc. performance.
The product is durable and has been used for 3 years without replacement with no problems at all with minimal lubrication.
Easier to obtain than OEM.
Reliable FOR JAPAN MODEL production.
A bad point
● No.
The Accelerator Wire is the part that is always in contact, so if you think the movement is suspicious, clean→ lubricate it. Or you should replace it.
View detail
This was a pre-delivery Service.
When I bought the car secondhand, the wire relationship was falling apart and was replaced before delivery, and the dealer used this Manufacturer at that time.
It is OEM compatible rather than external.
The replacement was done at the store.
good point
The performance is comparable to that of OEM products.
If grease up is done properly, it will last for a long time.
I replaced it before delivery and have driven about 30,000 km with no problems at all.
Easy to obtain.
●Lever movement was always good.
BrakeTouch is also gentle and firm.
A bad point
● No dramatic changes are expected.
I honestly don't think that the Levers need a dramatic change.
If the movement of OEM, and the durability of the same etc. as OEM ●
View detail
It was replaced before delivery.
When I bought the car used, the wires were falling apart and I had to replace them before the car was delivered.
OEM compatible rather than external.
The replacement was done at a pre-delivery store.
good point
The product is comparable to the OEM product, just because it is an OEM-compatible product.
If grease up is done properly, it will last for a long time.
I replaced it before delivery and have driven about 30,000 km with no problems at all.
●Wire movement and Throttle movement were always good.
A bad point
● No dramatic changes are expected.
And if the Accelerator Wire does not return or breaks, it is Large strange.
If the movement of OEM, and the durability of the same etc. as OEM ●
View detail
Endorsed by Motorcycle shop.
When I bought the car secondhand, the wire relationship was falling apart and was replaced before delivery, and the dealer used this Manufacturer at that time.
It is OEM compatible rather than external.
The replacement was done at the store.
good point
The performance is comparable to that of OEM products.
If grease up is done properly, it will last for a long time.
I replaced it before delivery and have driven about 30,000 km with no problems at all.
Easy to obtain.
●Lever movement was always good.
A bad point
● No dramatic changes are expected.
I honestly don't think that the Levers need a dramatic change.
If the movement of OEM, and the durability of the same etc. as OEM ●
View detail
need to wait
The reviews about the delivery date were relatively poor, but luckily I was able to receive it 10 days earlier than the expected date.
I was very impressed with the post-processing and thank you for the fast delivery. I look forward to selling good products in the future. Thank you. ------------------------------------------------------------ -------- The review of the shipping date was relatively bad, but I was lucky to receive 10 days ahead of the scheduled date. Thank you. Powered by Google Translator
View detail
Since we made the TRIALHandlebar.
I bought this one with an extended handlebar height over the OEM one because I went with a Trahan and the handlebar height was higher. Good thing the price was kept down! It works fine. View detail
Normal good
I bought this 200?Long Type because I replaced the Handlebar and wanted to change the way the Wire crawls.
I feel the Size of the Thailandco part and the movement of Wire are the same as OEM etc., and I use it without any worries.
View detail
This is a big deal. This is a great idea.
This is also OEM compatible, or rather OEM.
The factory that makes the OEM products has the same standards, but they are label-less.
I was introduced to this one by a motorcycle shop. I bought a rather old vehicle, and the Choke Cable was useless and defective.
It's not particularly difficult to install, just replace the existing one.
good point
A little cheaper than OEM.
The quality is OEM, so it's durable, even if it doesn't last more than 5 years.
The standard is still OEM, so it's easy to install and fits perfectly.
FOR JAPAN MODEL production.
A bad point
None
The Choke Cable was completely useless, so I couldn't run without Chalk pulling on it.
And if you try to order OEM, it's the Large cut that takes a long time and doesn't make you wait for easy access.
View detail
With the Handlebar replacement
I bought it because I changed the Handlebar to a tapered one, and the height of the clamp increased and the width widened, so the cable became flat.
I am very happy with this product because I can extend the cable as much as the height is increased.
View detail
Quality!
I installed the ZETAHand guard and changed the Clutch Wire from Limit to a 5cm longer one, and I'm happy with the result that I can afford it! View detail
Fee Ring no less than an OEM!
Made in Japan for peace of mind
It's ready to install as soon as you open the bag!
Don't forget to lubricate it when you install it
It's well made and has a feel comparable to OEM
Affordable, and when the Fee Ring goes bad
It's a great price that I'm willing to change without lubricating
I'm happy to deal with We-Big for cheap shipping and fast arrival
I'd like to try the Mesh hose as well
Affordable as well
View detail
Wire is durable
Since it is as strong as OEM, after sliding well in Oil after purchase
It was as slippery as OEM.
"Domestic production" I used another wire written as "Wire"
Wire itself was weak and it was not good,
I am very satisfied..
View detail
At first it is a bit slippery
If you inject Oil it will slip the same as OEM.
The thickness of the wire is also close to the OEM, if the handling is the same
It can be used without Stress.
I also bought a different wire, but Wire is thin
I got a feeling of Wire's rubbing and it got heavier.
View detail
Is good.
93 year model XLR 250R MD22 PD79 CCarburetor stuck and it was troubled.
It improved considerably by exchange of Throttle Wire. Thank you.
View detail
Is good.
XLRBAJA Throttle Wire Quantity : There are 2 pc.
Owner was detaching the return wire a while ago, is it a fashionable remodeling?.
Because of that, Throttle's return was bad and there were times when it did not slow down and it was dangerous and troubled.
OEM Parts Number can not be obtained due to out-of-print, even if you get a new item, other Company Product was just XR's.
By the time I gave up I found this product with Wa Big. I bought it and installed it.
I could not compare the return Wire because there is no OEM Product,
Pull Wire was exactly the same length and shape as that of OEM. I could install it to the car body without problems.
After installation it is perfect without pasting Throttle.
View detail