Reviews
Grip is amazingly durable!
[How is it used?
This product was stuck on an XR250 Seat that was purchased used by a person at work about 15 years ago from the beginning.
The vehicle had been restored to the best of my ability at that time because the exterior of the vehicle was damaged except for the Seat, and after many years it came to me a few years ago.
The exterior of the car was damaged by ultraviolet rays, and the tires were badly cracked and the brakes were sticking to the car.
Sorry for the long preamble, but even in such a state of exterior rustling, only Seat remained flexible.
The surface had lost its Luster due to water stains and dust, but after washing the car and applying a protective material, it returned to the condition it was in 15 years ago.
It is indeed a product sold by Webike for 10,560 yen, and is definitely more durable than the OEM Seat Cover.
How was your experience with it?
When the car came into my possession, I again did Restore maintenance on each part of the car, but I drove it for a while without reupholstering the Seat (I eventually replaced the Seat Cover with another Manufacture's one to match the repainted exterior).
GripperMaterial that "Demonstrate Exceptional Flexibility and Grip Power" as the manufacturer's slogan says, is used throughout.
Assist Rider's Machine Control. The flexibility and gripping power did not deteriorate even when exposed to ultraviolet rays, rain, wind and dust.
How did it compare to other products?
As I mentioned above, I had replaced it with a Dimple-finished Seat Cover made by another company, but the Seat Cover remained as flexible as a new Seat surface after more than 15 years. I think it is phenomenally Tough.
[Points to note]
Not so much as a warning, but the moat on the Seat Cover named GripperMaterial was deep, and if the Seat was bathed in mud, the dirt would get into the deep moat and be difficult to remove.
The product is three-dimensionally sewn for XR250 (MD30), so it is relatively easy to work with if you have experience in Seat reupholstery in the past.
Other items that would be helpful
The deciding factor in the purchase
As I mentioned at the beginning, it was already stretched at the time of purchase on a used car.
[How is it used?
Basically, it is a city Main, and I am fully aware that it is a high-performance Motorcycle for a 4StDual PurPass car at that time, but I could not handle it because my feet could not reach the ground on rough terrain, and I lacked the skills.
【Included Parts:presence or absence】.
Quantity of 1 Seat Cover and Instruction Manual on how to apply.:Set
I don't think there was a tandem belt attached.
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker, a slightly larger version of Stapler. and short-legged core.
The fabric joints are crimp type like OEM, so there is no slippage, I think Coking agent is not necessary.
Opinions and requests to Manufacturer.
An indispensable manufacturer in the off-road motorcycle world.
We look forward to your continued development of a wide variety of lineups.
View detail
The color match is narrow, but it’s okay.
It is not difficult to attach, but you need to be careful about the location when attaching. Since it is generally thick, the fork cover's role is also high. And it's cool View detail
StickerTune staple of Swing Arm
I plan to replace Sprocket later, so StickerTune first. View detail
Cut and feel good
I bought this one because the original decal had peeled off due to aging and deterioration, and I also bought this one for dress-up. Cutting was easily done with a 100-yen craft knife. The product photo is not very kind. In fact, the SIDE Decal is reversed and the DUNLOP Logo is correct. View detail
For those who want to change the exterior Image.
[How is it used?
I purchased this product, which is cheaper than the OEM Decal, to refresh a slightly scratched Shroud and Side cover that I got used.
Did you receive the item as per the Image?
The thickness of the decal is firm and the durability looks promising, the gloss and design are good, and the product is just as in Image.
Was it difficult to install?
This kind of work is... more than difficult. "A tedious process." The feeling was so strong that it took me half a day to get there.
How did you like it?
The quality of the decal was very satisfactory with almost no gapping of the mold and high quality.
Because of the thickness of the Decal itself, there is no tearing or peeling after a few falls. (Except for falls on gullies, etc.) No complaints about durability.
The adhesive strength is high, and if it is applied firmly at first, it will hold up to high-pressure cleaners better than OEMDecal, so it is easy to use. (It is not absolutely impossible to peel off. Please keep in mind moderate spec.) Easy to wash the car after playing in the mountains.
As mentioned above, the adhesive strength is so strong that it can adhere even over scratches on shrouds and other surfaces without any problem, and the thickness of Decal itself makes scratches inconspicuous, making it ideal for concealing wounds.
Was "Included Parts:" attached?
Only Decal is taped to a cardboard to prevent it from losing its shape, so please peel it off before working on it in the mansion.
Were there any disappointments?
The thicker fabric makes the application work a bit large, but the hard work pays off when you see the finished exterior.
Other items that would be helpful
Point and hang of installation
Work slowly and unhurriedly in a dust-free environment.
Spray the backside of the Decal and the object to be attached with a mist spray diluted with a neutral detergent, and position the Decal and the object to be attached by displacing it, and then remove any air or moisture that may have entered between the Decal and the parts little by little.
I think it can be applied beautifully without wrinkles by applying heat to curved surfaces with a dryer or similar tool.
In advance on YouTubeetc. Motorcycle Decal Paste. You can work with even more confidence if you check out the video by searching for
[Availability and clarity of the Instruction Manual
Was there an Instruction Manual? Well, I don't think you need Instruction Manual if you watch the video before you try.
[Notes]
Object to be pasted (Shroud and Side coverretc.). The surface of the "P" should be degreased thoroughly before applying the adhesive.
[ITEMS TO BUY TOGETHER
Chemicals for degreasing (parts cleaner, silicon-off, etc.), spray bottles for misting, rubber spatula for degassing & dehydrating, etc., will help you to work smoothly.
[Opinions and requests to Manufacturer
Please reissue Decal for discontinued models only after a certain amount of orders have been placed.
View detail
Fits: KAWASAKI KDX220SR, KAWASAKI KDX220R
Parenthesis is so good that I can't keep it clean anymore...
[How is it used?
I have used the Graphic decal for WR250R before, so after checking with Webike to see if they had one for KDX220, I did whatever I could to get the money to get it.
I used it on the WR250R to refresh the somewhat scratched shroud and side cover, but this time I am buying it to use on the new exterior of the KDX220SR.
Did you receive the item as per the Image?
Like the Decal I had purchased before, it was thick and durable, and the gloss and design were just as good as the Image.
Was it difficult to install?
It is not difficult, but it has a strong sense of tedious work and also requires patience, so it takes more time than you might imagine if you are not used to it.
How did you like it?
The quality &design of the decal without any gaps in the mold is very high, and we are very satisfied with the result.
The thickness of the Decal itself makes it resistant to tearing and peeling after a few falls, but I felt it was a waste of space and could no longer play in the mountains with this exterior attached. (I'm poor.) 。
When we play in the mountains, we go out with used exteriors with cheap Decal attached to them.
Was "Included Parts:" attached?
Only Decal is taped to a cardboard to prevent it from losing its shape, so please peel it off carefully before working on it.
Were there any disappointments?
No, it is just my personal opinion, but I have no complaints about both the texture and design.
The thicker fabric makes the application work a little large, but when you see the finished exterior, the hardship of the work will disappear.
Other items that would be helpful
Point and hang of installation
Work slowly and unhurriedly in a dust-free environment.
Using a spray gun, spray a diluted solution of neutral detergent on the backside of the Decal and the object to be affixed, and position it while shifting it slightly to remove any air or moisture between the Decal and the parts.
I think it can be applied beautifully without wrinkles by applying heat to curved surfaces with a dryer or similar tool.
In advance on YouTubeetc. Motorcycle Decal Paste. You can work with even more confidence if you check out the video by searching for
[Availability and clarity of the Instruction Manual
Was there an Instruction Manual? Well, I don't think you need Instruction Manual if you watch the video before you try.
[Notes]
Object to be pasted (Shroud and Side coverretc.). The surface of the "P" should be degreased thoroughly before applying the adhesive.
[ITEMS TO BUY TOGETHER
Chemicals for degreasing (parts cleaner, silicon-off, etc.), spray bottles for misting, rubber spatula for degassing & dehydrating, etc., will help you to work smoothly.
[Opinions and requests to Manufacturer
We would be very grateful if you could reissue the models that have been discontinued in the past, once we have enough orders...
View detail
Parenthesis good
Parenthesis good
I would buy again.
View detail
Anyone can put it up in three sections!
When ordering,
Swing Arm has a bumpy decoration, but I wonder if it can be applied neatly.
I was worried, but when I received it, I was surprised to see that it was divided into three parts!
Anyone can put this up!
The texture and design are perfect with Front.
View detail
The footwear is tightened.
ExactSize because it is Exclusive Design.
It is thick and has perfect adhesion.
It is easier to install the Left Side by removing the Brake hose clamp.
If you hurry, you can turn around. It is.
It can be done by anyone because it is just a matter of putting it on.
View detail
It was installed perfectly!
Mounted on Swing Arm of CRF250 Rally MD47!
If you are not careful, it will bend, but it is not that difficult.
White areas are dirty and should be cleaned regularly!
View detail
Fits: HONDA CRF250R, HONDA CRF250X, HONDA CRF450R, HONDA CRM250R, HONDA CRM250AR, HONDA XR250, HONDA CR250, HONDA CR125
Very nice product for the price.
Love the look! I had purchased some after market lower fork covers and they were getting very hammered from normal use.Well made graphics and thick for protection to my new plastic.Otherwise the graphics are thick and durable, after riding through the bush a few times there is hardly any noticeable scratches. WOW! Made the fork look like new! The actual decal is very thick, so I expect they will last a long long time. Fork guards are not round but have creases so use a heat gun to ease installation to mold around the plastic. View detail
For crf250ls
I bought this to do Custom in Decal! View detail
For the 2023 CRF250LS
I bought this to do Custom in Decal! View detail
Decal FACTORYFX sticking on CRF250L volume
Nice. Race ishand practical!
It's a given that you have to degrease it properly when applying it, but I had to remove the Front Fork Guard on the side to make it easier to apply it! (Still, when I forced myself to paste it, I got air andGarbage!)
Anyway, I'm going to make a recommendation for Fork Guard's anti-scratch, dress-up and recommendation.
View detail
Off-roaders, this one's for you!
Quantity at Motorcycle supply stores until now.:I had to pay almost 1pc.800 yen to buy and put up the Sticker. This one costs almost 3,000 yen at the time of purchase, but there are so many Stickers of various Manufacturers in Quantity:I thought it was a good cosmetic price for the set.
The quality is good and the Size is just right for putting on SheLoud, etc. The only thing that would be great is if the durability is better;
View detail
They look strong
Was the installation difficult?
Used on CRF250L (MD47).
Since it is a thick Decal, I think it is best to work with it while warming it up.
The shape of the Fork Guard has not changed, so it can be attached to MD47 without any modification.
How was your experience with it?
It will not be defeated by rain, mud, etc.
CRF's feet are now glamorous.
I love it
The Blue in Decal is a little darker Blue than the Blue used in CRF, but not too much.
View detail
Race Specification (appearance oriented) If you want to...
[How is it used?
Used for Cowl's Dress-up.
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy
How was your experience with it?
The texture is solid and does not seem to be peeling off, etc., as it can be used in actual races.
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
None!
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
scratch-resistant
Purchased to prevent scratches as I go into the mountains.
It is divided into three parts, so it is easy to paste.
It's great because it looks and Parenthesis better.
View detail
No modification to the Swing Arm of the D-TRACKER-X
[How is it used?
Model used:2005 D Tracker
Applications:Motard race, Touring
Duration of use:In continuous use for about 5 years.
The vehicle uses the D-TRACKER-X Swing Arm, and this product is attached to the Swing Arm.
Was the one you received as per Image?
As per Image.I was using SUNSTAR's Sprocket and RK's Brake Pads, so Decal's look was exactly what I wanted.
We also felt that the Decal itself would provide good protection for the Swing Arm due to its thick wall.
Was the installation difficult?
It is not a difficult task if water pasting is done. If you have a Squeegee, you can paste on Beauty with a high probability.
If you do not do the above or cannot prepare the above, you need to concentrate on the application and carefully apply it so that air bubbles do not form.
How was your experience with it?
I have been using Decal for about 5 years and it sticks well and protects the Swing Arm well without peeling off.
The Decal itself is also sturdy and large enough that it has never been torn or damaged in any way.
Also, the appearance of the Large change was improved, and I was satisfied with the Large change without any color fading.
I was also satisfied with the Large change because it has the Manufacturer logo of the Parts I use.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Point and hang of installation
sprinkling
wipe off the fog (about 300 ml empty Spray bottle) and neutral detergent and water.
A drop or two of neutral detergent is OK; add it to the misting cloth along with water. Fill the water to the brim.
Lightly dampen the paste surface and Decal with a mist wipe.
Then, paste them together. At this time, it is best to avoid air bubbles as much as possible, so that later work will be easier.
After pasting, the Decal is pressed down with a Squeegee, spatula, or Towel to expel the aqueous solution and air bubbles.
Then wait a little and you can paste it into Beauty.
View detail
Cheap and cool!
GSX-R1000R Attached to 2019 Swing Arm
I have been looking for a MichelinSticker to attach to the Swing Arm with reference to the GSX-RR in motoGP.
Although Michelin's Sticker is sold at supply stores, the design is slightly different…
And the price for the size and feel to be put on the Swing Arm is just under 1000 yen;
So we have continued to forgo it.
But I finally found a nice Sticker on webike!
Although the design is slightly different, it is very close to that of GSX-RR, and the size feels exactly the same, at a low price of 330 yen/sheet.
I did not hesitate to buy it.
The manufacturer, EFFEX, is not some unknown manufacturer that I have never heard of, and the product I received was of a quality that I was fully satisfied with for the price.
This brings my car another step closer to the GSX-RR.
Thank you very much
View detail