Reviews
Fits: YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA YZ250F, YAMAHA YZ450FX
I purchased this product because I plan to replace the exterior.
I can't say for sure since I haven't received the exterior yet, but it looks solid, thick, and sturdy.
It seems to need some hang to paste, but I guess it's not a problem since forest roads and Enduro are Main.
View detail
Fits: YAMAHA YZ250, YAMAHA YZ125, YAMAHA YZ250F, YAMAHA YZ450F, YAMAHA YZ250FX
Not yet installed...
It is thick and firm. I wonder if it needs some hang to stick. View detail
Good looking stickers
Looks great, thick and durable, bonds good.Doesnt get scratched easily.highly recommend this. Easyl install,Cleaned surface of forks where these were to be applied and visually aligned the print applying the center as I held both ends back with one hand. Once the center made contact and I was satisfied the alignment was good I began pressing from the center up and down the full length of the decal to assure no bubbles were being trapped until one half was fully attached. Then worked from center again the other direction until it was fully wrapped around fork.Repeat on other side. View detail
Swing Arm Decal
Used on MD47RLY50. Easy to apply.
It is thick and seems to offer good protection.
OEMDecal's Tricolor color and
I think it is good to match and have a sense of unity.
Front fork is also available in the same design.
Will HONDALogo feel like a traffic jam?
View detail
The color match is narrow, but it’s okay.
It is not difficult to attach, but you need to be careful about the location when attaching. Since it is generally thick, the fork cover's role is also high. And it's cool View detail
StickerTune staple of Swing Arm
I plan to replace Sprocket later, so StickerTune first. View detail
CT110 HUNTER CUB as Decal
Purchased as Decal for CT110 HUNTER CUB. I didn't expect CRF for Swing Arm to be Exactly.... I put it on after I fixed it with masti because it is divided into 3 parts. It looks good. View detail
Cut and feel good
I bought this one because the original decal had peeled off due to aging and deterioration, and I also bought this one for dress-up. Cutting was easily done with a 100-yen craft knife. The product photo is not very kind. In fact, the SIDE Decal is reversed and the DUNLOP Logo is correct. View detail
For those who want to change the exterior Image.
[How is it used?
I purchased this product, which is cheaper than the OEM Decal, to refresh a slightly scratched Shroud and Side cover that I got used.
Did you receive the item as per the Image?
The thickness of the decal is firm and the durability looks promising, the gloss and design are good, and the product is just as in Image.
Was it difficult to install?
This kind of work is... more than difficult. "A tedious process." The feeling was so strong that it took me half a day to get there.
How did you like it?
The quality of the decal was very satisfactory with almost no gapping of the mold and high quality.
Because of the thickness of the Decal itself, there is no tearing or peeling after a few falls. (Except for falls on gullies, etc.) No complaints about durability.
The adhesive strength is high, and if it is applied firmly at first, it will hold up to high-pressure cleaners better than OEMDecal, so it is easy to use. (It is not absolutely impossible to peel off. Please keep in mind moderate spec.) Easy to wash the car after playing in the mountains.
As mentioned above, the adhesive strength is so strong that it can adhere even over scratches on shrouds and other surfaces without any problem, and the thickness of Decal itself makes scratches inconspicuous, making it ideal for concealing wounds.
Was "Included Parts:" attached?
Only Decal is taped to a cardboard to prevent it from losing its shape, so please peel it off before working on it in the mansion.
Were there any disappointments?
The thicker fabric makes the application work a bit large, but the hard work pays off when you see the finished exterior.
Other items that would be helpful
Point and hang of installation
Work slowly and unhurriedly in a dust-free environment.
Spray the backside of the Decal and the object to be attached with a mist spray diluted with a neutral detergent, and position the Decal and the object to be attached by displacing it, and then remove any air or moisture that may have entered between the Decal and the parts little by little.
I think it can be applied beautifully without wrinkles by applying heat to curved surfaces with a dryer or similar tool.
In advance on YouTubeetc. Motorcycle Decal Paste. You can work with even more confidence if you check out the video by searching for
[Availability and clarity of the Instruction Manual
Was there an Instruction Manual? Well, I don't think you need Instruction Manual if you watch the video before you try.
[Notes]
Object to be pasted (Shroud and Side coverretc.). The surface of the "P" should be degreased thoroughly before applying the adhesive.
[ITEMS TO BUY TOGETHER
Chemicals for degreasing (parts cleaner, silicon-off, etc.), spray bottles for misting, rubber spatula for degassing & dehydrating, etc., will help you to work smoothly.
[Opinions and requests to Manufacturer
Please reissue Decal for discontinued models only after a certain amount of orders have been placed.
View detail
It is good!
I was looking for a Sticker because I like Michelin Tire, but I found an affordable one among many expensive ones!
I am wondering if I should put it on Motorcycle's Box or on the light.
View detail
Parenthesis good
Parenthesis good
I would buy again.
View detail
Anyone can put it up in three sections!
When ordering,
Swing Arm has a bumpy decoration, but I wonder if it can be applied neatly.
I was worried, but when I received it, I was surprised to see that it was divided into three parts!
Anyone can put this up!
The texture and design are perfect with Front.
View detail
The footwear is tightened.
ExactSize because it is Exclusive Design.
It is thick and has perfect adhesion.
It is easier to install the Left Side by removing the Brake hose clamp.
If you hurry, you can turn around. It is.
It can be done by anyone because it is just a matter of putting it on.
View detail
It was installed perfectly!
Mounted on Swing Arm of CRF250 Rally MD47!
If you are not careful, it will bend, but it is not that difficult.
White areas are dirty and should be cleaned regularly!
View detail
fashion starts with the feet
Buy for dress-up
Strong adhesion and no durability issues.
It is slightly Large and can be Cut.
View detail
Just paste Custom
We have used this product in the past, and its durability is top-notch. If you are applying it for the first time, it may be difficult to get air in, but it is a good idea to decide where to start and apply the first part first, and then let the air out little by little. It is a product that imitates the OEM color, so it fits MD47 perfectly. Some people have applied RALLY 50 OEM decal on the front fender, but I've already applied DirtFreak decal, so I'm not going to do that. View detail
Mounted on MD47
Mounted on md47. The shape is slightly different, so I recommend cutting if you are concerned about it. I put it on as I wanted to. (??????) ?? View detail
Fits: HONDA CRF250R, HONDA CRF250X, HONDA CRF450R, HONDA CRM250R, HONDA CRM250AR, HONDA XR250, HONDA CR250, HONDA CR125
Very nice product for the price.
Love the look! I had purchased some after market lower fork covers and they were getting very hammered from normal use.Well made graphics and thick for protection to my new plastic.Otherwise the graphics are thick and durable, after riding through the bush a few times there is hardly any noticeable scratches. WOW! Made the fork look like new! The actual decal is very thick, so I expect they will last a long long time. Fork guards are not round but have creases so use a heat gun to ease installation to mold around the plastic. View detail
A little air!
Left Side was hard to remove, so I chose a day when there was no wind and degreased it as it was.
I got a little air in it, but no problem! Because it's an Off car.
Appearance is important. Scratch protection?
View detail
For crf250ls
I bought this to do Custom in Decal! View detail