Reviews
Fits: YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA YZ250F, YAMAHA YZ450FX
I purchased this product because I plan to replace the exterior.
I can't say for sure since I haven't received the exterior yet, but it looks solid, thick, and sturdy.
It seems to need some hang to paste, but I guess it's not a problem since forest roads and Enduro are Main.
View detail
Fits: YAMAHA YZ250, YAMAHA YZ125, YAMAHA YZ250F, YAMAHA YZ450F, YAMAHA YZ250FX
Not yet installed...
It is thick and firm. I wonder if it needs some hang to stick. View detail
Good looking stickers
Looks great, thick and durable, bonds good.Doesnt get scratched easily.highly recommend this. Easyl install,Cleaned surface of forks where these were to be applied and visually aligned the print applying the center as I held both ends back with one hand. Once the center made contact and I was satisfied the alignment was good I began pressing from the center up and down the full length of the decal to assure no bubbles were being trapped until one half was fully attached. Then worked from center again the other direction until it was fully wrapped around fork.Repeat on other side. View detail
CT110 HUNTER CUB as Decal
Purchased as Decal for CT110 HUNTER CUB. I didn't expect CRF for Swing Arm to be Exactly.... I put it on after I fixed it with masti because it is divided into 3 parts. It looks good. View detail
It is good!
I was looking for a Sticker because I like Michelin Tire, but I found an affordable one among many expensive ones!
I am wondering if I should put it on Motorcycle's Box or on the light.
View detail
fashion starts with the feet
Buy for dress-up
Strong adhesion and no durability issues.
It is slightly Large and can be Cut.
View detail
Just paste Custom
We have used this product in the past, and its durability is top-notch. If you are applying it for the first time, it may be difficult to get air in, but it is a good idea to decide where to start and apply the first part first, and then let the air out little by little. It is a product that imitates the OEM color, so it fits MD47 perfectly. Some people have applied RALLY 50 OEM decal on the front fender, but I've already applied DirtFreak decal, so I'm not going to do that. View detail
Mounted on MD47
Mounted on md47. The shape is slightly different, so I recommend cutting if you are concerned about it. I put it on as I wanted to. (??????) ?? View detail
A little air!
Left Side was hard to remove, so I chose a day when there was no wind and degreased it as it was.
I got a little air in it, but no problem! Because it's an Off car.
Appearance is important. Scratch protection?
View detail
Good points and areas for improvement
I bought this for my CRF250Rally.
I bought it when I was on MD44 before.
This time, I switched to MD47, so I was able to get a new one again.
Purchase
Off does not run, so it may fall or be hit by a stone.
is not, but the foot of the Front is tightened and
I bought it because it raises the appearance.
The quality is good.
Improvements.
It has been on sale for a long time.
Information on how to apply the paste well etc....
It should be enclosed.
If you can stretch it well and feel good about it...
More people would buy again.
View detail
appearance-centered
The Front, which had been lonely in appearance, is now gorgeous. View detail
Satisfied with Design
I put it on the Front fork.
Size is also Exactly.
View detail
Glamour Up
Tricolor color matched to crf250rally looks good.
crf250 boasts Material:AluminumSwingarm will be hidden, but I think it will provide some protection from the number of off-road falls.
Decal is completely divided into three sections, which is quite nerve-wracking when applying it.
We fine-tuned it by watching it many times from afar.
View detail
It makes the undercarriage look gorgeous.
[How is it used? I've been enjoying the forest roads while weeding on the way to touring.
Was the one you received as per Image? It is just as I had hoped it would be.
Was the installation difficult? It's easy, but the finishing touch is to use the Dryer to warm up the Decal and press it down firmly. Let's do it. (It's quite thick.)
How was your experience with it? No problem.
[Included Parts:were they on? None
Were there any disappointments?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Stylish car body
Swing Arm is lonely, so I bought it referring to the imprecation. It is easy to stick it, but the corner part doesn't stick easily, and it sticks when it warms it with Dryer.
The size is not perfect, but I don't mind it. If you want to stick it perfectly, you can cut it a little.
When I put it on the Rear, the Front became lonely for some reason.
View detail
Pasted on 21 years New ModelRALLY50
It was said to be compatible with 12-17 model year, but I was able to put it on my New ModelRALLY50. But I don't know if it's the original one or not, but it's not ExactlySize, and some sense is required.
The texture is quintessential FX, it's thick, the glue is strong, and it's gonna last!
View detail
Convenient
I bought this because I wanted to bring Originality to my Helmet.
The size was just right for sticking to Helmet as I aimed.
I'm satisfied
View detail
For MONKEY125.
The last purchase was for the Helmet and it looks good, this time is for the Quantity of Front forkCard of MONKEY125.:Pair (for Left and Right) I plan to put it on the View detail
Installation review
It's a pity that it's only triple color, but it's okay to put it on Even though I want to upload a picture, I can't review the picture because of an error. View detail
It makes a different impression.
The size is a little small.
It's about 3mm smaller than Fender.
The WR Fender is quite uneven, so it needs to be applied with heat, and since it is a thick Decal, it cannot be applied properly with water.
Apply heat from the center, and paste while stretching, but if you don't match the center exactly at first, the gap between the edges will not be even when you finish pasting.
I drew a line on the center of Fender and Decal with oil-based Magic and put them together.
Finally, use Parts cleaner to remove Magic and you're done!
Be careful not to apply too much heat or it will turn white and overstretch.
View detail