Reviews
Cute but solid.
The product was more solid than I expected.
It is necessary in case of emergency, but it has strong fashionable and parenthesis good for this type of car.
View detail
I think Sense is great because it makes my feet look gorgeous and it matches the body color of MD47.
[How is it used? Enjoyed driving on the forest road while we were on the touring.
Was the one you received as per Image? It is thicker than I expected.
Was the installation difficult? It wasn't difficult, but since the Decal is thick, I had to use the Dryer.
It is essential to apply it while warming it up and removing the Air.
It doesn't seem to be for MD47, but I was able to apply it with no problem at all.
How was your experience with it? FrontThey are great for making your feet look gorgeous.
[Included Parts:were they on? None
[Was there anything that disappointed you? nothing special
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
It makes the undercarriage look gorgeous.
[How is it used? I've been enjoying the forest roads while weeding on the way to touring.
Was the one you received as per Image? It is just as I had hoped it would be.
Was the installation difficult? It's easy, but the finishing touch is to use the Dryer to warm up the Decal and press it down firmly. Let's do it. (It's quite thick.)
How was your experience with it? No problem.
[Included Parts:were they on? None
Were there any disappointments?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
DecalCustom around Front
I bought this because when I installed the Swing Arm Decal on the Rear, the balance with the Front was bad.
There was an answer that it did not adapt to New Model, but I was able to do it without feeling uncomfortable.
The blue color is a little strong, so I feel that the HondaRed feeling is diminished, but I am satisfied with the design.
I don't know about durability, so I give it 3 stars.
View detail
Stylish car body
Swing Arm is lonely, so I bought it referring to the imprecation. It is easy to stick it, but the corner part doesn't stick easily, and it sticks when it warms it with Dryer.
The size is not perfect, but I don't mind it. If you want to stick it perfectly, you can cut it a little.
When I put it on the Rear, the Front became lonely for some reason.
View detail
Fits: HONDA CRF250 RALLY, HONDA CRF250M, HONDA CRF250L
Two amateurs, beautiful.
It took two large people about an hour to complete the reupholstering.
It is very difficult and time consuming for an amateur to put it up neatly by himself unless he has Air Tucker or someone to help him.
This time it was a cheap Tucker 2000 yen or so that I used.
You'll want to get on it as soon as it's strung up nicely.
View detail
Pasted on 21 years New ModelRALLY50
It was said to be compatible with 12-17 model year, but I was able to put it on my New ModelRALLY50. But I don't know if it's the original one or not, but it's not ExactlySize, and some sense is required.
The texture is quintessential FX, it's thick, the glue is strong, and it's gonna last!
View detail
Pasted on Swing Arm of 21New ModelRALLY50
I was worried if the Sticker for the old model would fit because I heard that the Swing Arm had been modified after the model change, but there was no problem. After all, Tricolor color is suitable for 250RALLY50! View detail
I adore Jonathan Ray's Mascene...
Recently I've been into StickerTune on my ZX-6R.
SHOWAShock has also been adopted by OEM, and I put SHOWASticker on it. design is also simple like SHOWA, like the machine of Jonathan Ray who is competing in the SUPER BIKE world championship, casually? Also, the purchase price is cheap. In addition, the purchase price was also cheap, and even if I had put it in the list of things I wanted, when I thought I would buy it, I could not buy it because the number of pieces I wanted was not there or the stock was gone or something, but I was finally able to get it.
Before applying the Sticker, I checked the position of the Sticker many times, positioned it with Masking, and degreased it well.The Sticker is not a Type Sticker that leaves letters, so please don't make any mistakes! Also, the Sticker has adhesive strength, but I don't know if it will be as durable as the OEM Sticker, but I'll keep my fingers crossed for the future.
View detail
In the mood for AMARacer
I put it on my Rear Fender for my Mayer klx.
I put water with a little neutral detergent in Spray bottle and sprayed a lot of water on the surface of Fender and the back of Decal. The feeling is AMARacer.
View detail
Adhesive strength is strong.
I put it on my Rear Fender for my Mayer klx.
The size is perfect.
There is no need to worry about it peeling off.
The adhesive tape part that protrudes from the edge will become black and dirty.
It's an Off car, so I don't care about the details.
View detail
The First Step of Off Car Custom
Thick and strong adhesive Decal.
This is not a simple StickerTune, it's a Swing Arm that doesn't peel off in muddy water.
It is a protective gear to protect from scratches.
Let's put it up as a first step.
View detail
Friendly design, but
I purchased this product for Circuit running. Part of the top of the base paper is peeled off, and it is a kind design that is easy to stick, but the glue overflow and stickiness are terrible, and the base paper is hard to peel off.
After you put it on, the overflowing glue spreads when you rub it, and it looks dirty (laughs)
View detail
Convenient
I bought this because I wanted to bring Originality to my Helmet.
The size was just right for sticking to Helmet as I aimed.
I'm satisfied
View detail
usually
It's a normal Sticker.
I put it on Swing Arm.
View detail
Easy to apply.
Because Rear Fender was full of scratches, I pasted it including the scratch concealment. Because it was a shallow abrasion, I pasted it without doing the surface treatment especially, but I was able to paste it without a problem. There is thickness, but it is possible to stick it beautifully when I stick it while using detergent and Dryer. View detail
For MONKEY125.
The last purchase was for the Helmet and it looks good, this time is for the Quantity of Front forkCard of MONKEY125.:Pair (for Left and Right) I plan to put it on the View detail
Off Cars without CoverUniversal Product
[How is it used?
The OEM surface skin was cracked, so I had to reupholster it.
Used for commuting and forest road touring
Was the one you received as per Image?
I have not used any other Leather other than this one. It is good for me personally.
I think that there is no doubt as for the quality because it is a manufacturer that makes exclusive covers such as Motocrosser.
Was the installation difficult?
Since it is a Universal Product, you need to do a lot of research and devise a way to make it work.
I think it's for people who want to try it for themselves, or who have the experience and don't want to waste time outsourcing.
If you try to do it only for the purpose of lowering the labor cost, you may think that it would have been better to send it to a contractor. 。
When stretching, be careful that the fabric only stretches in one direction.
Align the direction of extension with the direction of travel, or Quantity:Pair (for Left and Right) I think the way to put it up will change depending on the direction you match it to.
I call the direction of growth Quantity:Pair (for Left and Right) I stretched it in the direction and as a result it stretched good without any wrinkles.
How was your experience with it?
The OEM epidermis was hardened, so it was smooth, and it was easy to move the Position without being aware of it, but
This Cover is a non-slip GripperType, so you'll feel like you're sitting back down consciously.
The only thing that makes it difficult to use is that you don't have to grip your knee as much as you should because you feel like you can hold on when accelerating and decelerating.
There are no seams, so you don't have to worry about water leakage.
[Included Parts:were they on?
There is no Instruction Manual, so it is a product that you should research and think about by yourself.
At a minimum, you will need a tool (Pliers, Slotted screwdriver, etc.) to remove the needle that holds the skin in place and a
Tucker and Staple needles are required.
It is convenient to have Large Threshold DoubleClip for temporary fixing.
I used a Tucker from a certain Daso that is famous in some parts of the world. The needle is MAX.
Lately I've been wondering what the dcm electric tucker is like!
[Was there anything that disappointed you?
I guess I could have used some information about the one direction of extension and which way to use it, but
It's not so much a disappointment as it is a conviction and enjoyment, including the ingenuity therein.
View detail
WR250R
It is a thick Seal and does not tear even if it is reapplied 10 times.
It can be adjusted to a certain extent because it stretches.
View detail
Fits: YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA YZ250F, YAMAHA YZ450FX
watchman
The recent Yamaha cars have Print instead of Decal, so I didn't feel the need to put Decal on the whole car. I put it on the Rear Fender which was lonely.
It is a standard product and the durability and ease of application are good there.
Since Rear Fender has many flat surfaces, it is easy to apply.
I peeled it off after 5 years and I'm happy to say that it didn't tear in the middle and I was able to remove it without stress.
The Decal was deteriorated, but the resin underneath kept the shine of the new car.
However, the price needs to be a little lower to feel more expensive.
View detail