Reviews
DID chain tool usage review
DID chain tools are small in size and very convenient to use.
The strength of the tool is very strong and reliable.
The method of use is very simple, so anyone can easily operate it.
It seems like one tool can be used for a long time.
This served as an opportunity to further increase trust in DID.
-------------------------------------------------- -------- DID chain tools are small in size and very convenient to use. The strength of the tool is very strong and reliable. The method of use is very simple, so anyone can easily operate it. It seems like one tool can be used for a long time. This served as an opportunity to further increase trust in DID. Powered by Google Translator
View detail
It's great that it's not difficult.
I thought Chain exchange could only be done at the Shop.
I nervously worked through the Instruction Manual and YouTube, and it was surprisingly easy.
Next, I have prepared a Chain replacement for GSX1300R HAYABUSA and will lend it to my friend.
If you use it for a few cars, it will be enough to pay for itself.
I'm glad I bought it... ♪
View detail
Even an amateur can replace the chain. (However, 27mm Glasses are required.)
Recommended Chain Replacement Tool for DIY.
Chain replacement tools range from those that cost 40,000-50,000 yen to those that cost less than 5,000 yen. To be honest, I was hesitant about the price because I use them very infrequently (maybe not even twice), but I was sure of their quality and the official videos on how to use them. I'd rather buy something for $4,000 and have it fail." I bought it with the feeling of
You can replace it without mistake by following the instructions as shown in the official video.
The point that I had a hard time was that there were no 27mm Glasses, so I used MONKEY as a substitute, which made it difficult to fix the body, which is important, and I could not use force, etc. 27mm Glasses are essential to fix the body securely. I will definitely prepare 27mm glasses next time I use it.
The 19mm turning side can be adequately handled by the Box and Ratchet Handlebar.
It is also good that the OtherParts are sold in bulk. I experienced the pin removal process for the first time, but I feel it is inevitable that I will make a mistake and bend it someday.
If you are going to replace the Chain yourself, I don't think there is an option below this (price), so I think the Cost performance is sufficient.
View detail
I was able to replace it properly.
I had a DRC Chain tool in the past, and when cutting a 428 chain, the tip of the tool broke off and I had trouble replacing it, so I was distrustful of this manufacturer's products.
This time, I decided to buy it after seeing other people's impressions and videos that seemed to work, and after considering the labor cost to ask the shop to do it.
I started with Chain cut to replace the 520 Chain and was able to cut it with no problem at all.
The work proceeds according to the instruction manual and is completed relatively smoothly until the Plate is press-fitted.
The last Crimp work, the Body is a little smaller than the Material.:Although it was light for aluminum and required considerable force, we managed to install Crimp.
I think it is a great product that can do everything from cut to crimp with just one tool. The size is larger than the previous version and I think it is stronger.
If you want to replace the Chain and Sprocket by yourself, we recommend this product because it is reasonably priced and works well!
View detail
easy to use
Easy to use
Daido has Daido, you can trust him.
View detail
If you're not good at it, you'll break it. You're not good at it.
Hit it straight, don't rush, and take your time.
I didn't expect it to break... I wish I had a couple of spares.
I don't think we are in a hurry.
The work doesn't stop and it doesn't take time to make arrangements.
Do not make the mistake of matching the Chain size!
View detail
DID Kashimaru Gun Rivet & Cutter Pin Product # 4525516902113
Thank you for the fast delivery Thank you for the fast delivery Thank you for the fast delivery Thank you for the fast delivery Thank you for the fast delivery Thank you for the fast delivery View detail
520Chain Exchange
I purchased this for Chain replacement.
It is easy to understand if you DID watch YouTube before working on it.
hang carefully and accurately.
View detail
Spare parts for Kashimaru-kun
I broke a Pin during Chain cut, so I bought the part. View detail
I finally bought it.
[How is it used?
I bought this to replace Chain.
I've been wanting to get one for a while,
This is a moderately high-end product, isn't it?
It's been 10 years since I put it off, thinking about how many times I'll have to replace the Chain before I die,
I decided to buy it because I mainly play Race and I thought that the frequency of Chain exchange would be there as well.
How was your experience with it?
The Instruction Manual was properly included so I could use it with peace of mind.
I used to use tools like Chain Tool only or Crimp only and I would ruin them quickly. (I would like to believe that my usage was not good)
It can be used simply because it has few configuration parts.
Also, the cans DID look stylish. Cool.
When I opened the lid, it was skunky, so I put the Sponge that came with Brake Pads underneath to make a Cushion.
[Points to note]
I think it will not be a problem if you read the basic Instruction Manual, but you might want to buy a spare pin for cutting.
If it breaks, the motorcycle will not be able to run!
View detail
For Chain exchange.
Used to replace Chain in 428 Size.
It is convenient to have multiple Adapters and to support various Chains. The texture is cheap, but the whole thing is rigid, and I think Large things like Pin are well made.
If you only need to replace it once, it is cheaper to ask a supply store, but doing it yourself is simply more surface white and satisfying. Durability is unknown.
View detail
I break them regularly.
Hard parts like these are fragile as is the fate of materials, and will break easily if force is applied to them at an angle.
The Chain ToolPin should not break if it is applied straight, but it is a Pin that breaks at an angle if you are not careful, and as a result of proceeding with the cut process without noticing this, it breaks at a rate of about one time every two years.
In short, the work is messy, it is failing and breaking, and the cause is all my fault.
The pin itself is extremely rigid and straight, so there is no reason for it to break if you check it carefully and work accurately.
Well, even if you break it, you can buy Repair Parts like this, so there is no problem at all.
Body is for extremely sturdy PRO, so it can be revived again and again.
I've been using it for almost 20 years now.
I have not had a single difficulty in obtaining them, as they are often in stock on Webike, whether people fold them or not.
KTC is also great to keep making Parts!
View detail
No failure because it does not tighten beyond the specified value.
I replaced the 520Chain of Kashime Joint by myself for the first time.
It was a difficult Image, but with the Chain Cut & Crimp tool, the old Chain Pin removal and attachment,
The new Chain was easily press-fitted and kinked.
Chain Cut & Crimp tools are designed to prevent over-tightening during press-fitting and crimping.
I was able to complete my arrival with peace of mind because I was there.
View detail
Nicely done.
It's not something I use often, but it's a hassle to take it to the shop, and it's convenient to have it on hand, so I bought it.
I've had the experience of buying cheap ones in the past and having them break down quickly.
I thought it was a bit expensive, but it was the right decision.
As expected from ChainManufacturer, the construction is solid.
It is easy to use.
Recombination of parts and Quantities:The set position can be changed to perform a series of operations from cut to press-fit to crimp, which is very well thought out.
Plate press fit and Crimp to the specified values, respectively.
We tightened it up several times while measuring the dimensions.
The work was completed smoothly and without problems.
View detail
Cutter pin broke
I used DID Kashimaru #50 series set to replace the chain all my bike. The work is very easy but I once did the wrong way so cutter pin broke. I order new DID cutter pin #50 to replace. View detail
Keep a spare.
When cutting a chain, the Crimp pin is shaved off to make it easier to pull out,
Since it was cut at an angle, the Pin Cutter also entered and broke at an angle.
This time there was a problem with my work, but it is a very heavily loaded component,
I think there is no harm in having Spare.
View detail
I was able to work on it for the first time without any worries.
This single tool can be used to cut, press-fit, and crimp a chain.
We actually replaced 530 Chain.
I was a little apprehensive before working on it, but I found the design to be very workable.
The work itself requires 27mm and 19mm spanners and glasses, but the long size can be done without much effort,
The rigidity of the object itself allowed us to work without anxiety.
If you don't know how to do it, DID has a detailed work instruction video on YouTube, so you can do it without making mistakes.
In addition, in the event of damage, Repair Parts can be purchased for each part.
View detail
Good quality and fit. Needs more adaptors
Don't buy a cheap one! These work, and trust me, you want it to work when you need it. If a pin does break, they are easy to replace but most likely it won't unless you aren't using it properly(read the instructions if you've never used one). I had the unfortunate issue of breaking one of the punch pins, as the instructions say to place on pin and push pin out the otherside. The instructions do not tell you to grind the pin head down before attempting to push out. Great tool, and a must for anybody who maintains their own bike.I broke two chains with this in 5 minutes by myself. Just get it. Even though they recommend grinding out the back of the rivet I didn't and it just worked. Well worth the cost. Just like all of DRC's tool this is nicely made and you can tell it's a quality tool by I get of my orders delivered short time from Webike. Awesome company, and all the Customer support are top of the line and really show the level of customer service Webike delivers to their customers. View detail
Handlebar makes it easy to grip and apply force
I purchased the DRCChain toolPRO for my first ChainDIY replacement.
As a preliminary knowledge, we watched the Chain replacement process on YouTybe and decided on the DRC product, which seemed easy to use.
The handlebar of the product was easy to grasp and support, so I was able to work stably.
The actual work was also very smooth due to the simple configuration of the product, and chain cutting was easier than I had imagined.
I think it is moderately excellent.
View detail
DRC Chain Tool
I bought it to replace the chain myself. The manual is in Japanese and English. The manual kindly guides you through all the processes, so even those without expertise can replace the chain. There is a storage space on the handle, so there is less risk of losing parts. View detail