Reviews
Used during centrifugal Filter removal of Grom.
Items essential to remove the centrifugal Filter of the Grom.
Without it, the Filter cannot be removed because it is co-rotating.
I am not sure if it is an individual difference or a problem in usage, but I managed to fix the GEAR and it is OK.
It will probably appear only once, but if there is to be a next time, it will probably be when the Clutch is replaced.
I wish it were a little cheaper.
As an aside, I lost the one I had purchased and went in a hurry to a Motorcycle supply store to buy another one.
Please be careful not to lose it because it is small.
View detail
Fits: YAMAHA TZR50, HONDA BENLY50CD90, HONDA XL80, HONDA XR100, HONDA XL50, HONDA NSR50, HONDA NSR80, HONDA NS50F, HONDA NS-1, HONDA CRM80, HONDA MBX50, HONDA CRM50, HONDA CR80R/RII, YAMAHA TZM50R
KITACO after all
When I first bought a cheap one for about 2000 yen, the shaft was off and the tool wouldn't fit. This one is a little more expensive, but it fits easily and I regretted that I should have bought this one from the beginning. View detail
It is a product that will last for a long time!
The price is a little high, but the rubber part is also sturdy and can be used for a long time in a wide range of sizes. View detail
Fits: HONDA NSR250R, HONDA NSR250R, HONDA NSR250R, HONDA NSR250R
still necessary
Essential tool to remove GEAR to ask for CrankshaftOH.
It is possible to remove it with a piece of aluminum, but it is still this one.
View detail
Fits: HONDA CRF450R 2014, HONDA CRF450R 2015, HONDA CRF450R 2016
It is a Universal Shock Pump!
[How is it used?
It is designed for CRF450R, but since it is universal, it can be used for Shock Pump to inject into air suspension of Harley and for Motorcycle.
Was the one you received as per Image?
I was surprised that it was smaller than I expected.
How was your experience with it?
Even though the size is small, the functionality is not a problem. In fact, the small size helps when storing.
[Points to note]
Recently, many products made in China have been distributed, and there are many different products in the market, but the Gauge display is not always correct, or it may break immediately, so it is necessary to use the product many times as it ages. We will not be stingy and will recommend high quality products.
How did it compare to other products?
We do not trust Chineseness that can be broken quickly.
Recommendation for the maintenance of continuity.
▼The air valve shape is US-style, so it is highly universal. The size of the valve may not look like the size of a normal bicycle, but it is no different from the shape of a valve used on a normal bicycle.
View detail
As you tighten it in.
I use it for Caliper's rubout etc. When I tighten the Screw and open the Plate with 4POTCaliper like NC30, the Plate is not parallel and I can't get the 4 Pistons to be even etc.
The fact that it cannot be pushed in makes it difficult to use. The texture is good, so I would like to have the Guide of Plate as Quantity instead of 1 pc.:I am wondering if I should have purchased the 2pc one.
View detail
Special Tool for CBR1000RRRSHOWABPFFork Disassembly
Special Tool for InnerCartridge removal of Big pistonFork. 90N tightening, so loosening is Large.
The Torque is tightened by hand and that's it. Why do you tighten it with such a stupidly strong Torque?
View detail
Special Tool during CBR1000RRRSHOWABPFFork disassembly.
Special tool required for removing and installing the top cap. octagonal. View detail
Required for Exhaust SystemJoint spring
Exhaust SystemJoint spring is a must for installation.
Don't be stingy and have one so you can install it without injury.
Recommendation
View detail
I can't use it for the slipped Clutch, though.
Cannot be fixed with Clutch that has started to slip.
When loosening the machine, I turned it with Impact.
If it's new and properly assembled, it will hold it firmly in place.
If it's not assembled right, it won't lock, so fix it in place to make sure.
Nut tightening check, I think it's good.
View detail
Genuine Honda Part.
This is the oil slinger flywheel tool called for in the factory manual. It's perfect fit and like every genuine Japanese tool Ive ever used including woodworking, It's flawless. View detail
easy to use
Easy to use, Inverted Front Fork cannot be done by hand. View detail
Hard Oil is hard.
It is hard to suck up hard Oil. View detail
This makes it easier.
I use it to rub the ROD and it is easy! View detail
It is also used with Syringe Type and Negative Pressure Breeder.
As the title suggests, it is also used with the Syringe Type and Negative Pressure Breeder.
This is to prevent backflow.
Especially with the syringe Type, reflux is a concern, but in such cases, this is also used in conjunction with the syringe Type.
* Image shows negative pressure Breeder
* Video is from the May 14, 2023 FZr.
View detail
A syringe Type is also sufficient.
I bought a cheap negative pressure Pump, but it is only a cheap one and the suction Speed is slow.
I have traditionally used this syringe Type, so even though it is a cheap negative pressure type, it costs more than 2000 yen, so I think this syringe Type is sufficient.
If pressed, the capacity of the syringe is more convenient for the Large size.
* The image shows a cheap negative-pressure pump.
* Video is FZr circa May 14.
View detail
OHLINSPreload AdjusterTool
This is a quintessential OEM product.
It is easy to use.
I had bought a brand new OHLINS Suspension for my ride, but when it came time to adjust the Pre-road, I lost this Wrench and had to buy it.
Cospa is not good.
Just expensive.
We recommend that you keep them in a safe place so that you do not lose them.
View detail
It can also be used for car washing.
One thing that always accompanies an off-road motorcycle is, after all, washing the car. It would be nice if we could use the car wash machine at Course to wash the car immediately after riding, but that is not always possible.
It would be nice if you could wash the car right away, but if you leave the car for a while, the mud will harden and make the car wash even more Large strange. Therefore, it is recommended to wash the car at the timing when the mud is still dry after driving, so that the mud can be easily removed.
It can also be used with the Moto Spade in one hand while scraping mud out of the car wash. The Brush part is especially easy to use when washing the car.
It is a well thought-out form and easy to use, as only the Brand "Motion pro" can do.
The only drawback is that it is a bit expensive.
I try to carry it with me by shoving it in my car's Off supplies box.
View detail
Fits: HONDA CB900F, HONDA CBX1000, HONDA CB750F, HONDA CB1000C 83, HONDA CB1100F, HONDA CB900F, HONDA CB750F
Can be used for CB750F
I bought this to replace the ValveShim on my CB750F. The Honda-specific tool is already discontinued, so some people make their own. At first, I tried this Hondafor Vehicle. The actual tool is surprisingly small, but it's not to be underestimated:just insert the tip of the tool between the cam and push it in, and the valve lifter will drop and the shim will be easily removed. The cost is great, and it is truly a god tool. View detail
Fits: HONDA FTR223, SUZUKI ST250 E type, SUZUKI ST250, SUZUKI GSR400, KAWASAKI ZRX400, HONDA monkey, HONDA Ape 50, HONDA Ape 100, HONDA NC700X, HONDA NC700S, YAMAHA TW225E, YAMAHA TW200E, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1100II, KAWASAKI ZRX1100, KAWASAKI W800, KAWASAKI W400, KAWASAKI 250TR, HONDA HORNET250
Perfect hole drilling
[How is it used?
Used to drill switch box preparation holes in universal handles
phi& phi;5mm.
Was the one you received as per Image?
Fairly solid construction
How was your experience with it?
The hole was drilled perfectly in the desired position.
[Points to note]
High prices….
It's not something I use that often ….
How did it compare to other products?
Unknown, never used another company's.
Some other companies' products are a little cheaper,
Is there any difference as far as performance…?
View detail