Reviews
Used for Wiring processing
After all, using a decent tool will ensure a clean and fast completion.
This is one product I wish I had bought earlier.
View detail
Required for Coupler processing in Blinkeretc.
[How is it used?
I purchased this product because I wanted to use the same terminal as the OEMCoupler instead of the Bullet Type Terminal connection when attaching an external Blinker.
How was your experience with it?
It works fine. If it were a little more expensive, the feel would be better, but for this price range, I have no complaints.
The BlinkerCoupler for Kawasaki cars is essential, as it can only be fully crimped with Electric Works Pliers for fine wire.
[Points to note]
0.This is for 3sq or smaller only. Please be careful not to use it for other standard items as it may lead to wire breakage or damage to the tool.
How did it compare to other products?
It's neither too good nor too bad. It is inexpensive and easy to buy.
View detail
This is easy to use!
I used it for a simple DIY project (Motorcycle Wiring work) and it is easy to use!
The price is reasonable and I think it is a great Entry model!
View detail
MAJOR JSTConnector and ultra-thin Waterproof standards are a bit more difficult.
I bought it because I often use JSTConnector or aftermarket parts with JSTConnector for electrical customization, and the size of the pliers cannot be handled by normal Electric Works Pliers.
The texture and construction is very good and can be worked on at least once.
I'm not sure where the Crimp function is used other than INS, but the Manufacturer's description says it is used to crimp the core wire. (AWG28-22) I've been told to use the INS part, but I've never been able to get it to work, so I've been doing everything with the INS part.
The INS part is also very delicate, and the cladding on the Female side of the JST is problematic, and almost 100% of the Base part is pinched and distorted. Type "W" The Male side is fine.
I don't know exactly why it is W-shaped, but I think it happens in the Clearance setting, which is inevitable as a Universal Product.
It is good to use a distorted connector terminal with a distorted crimp, but I use a solder to fix the core wire because it tends to fall out (although it does not make much sense to tighten the sheath part …).
Well, JSTClass would be better to use a dedicated Caulking Tool, but it is expensive!
This product is quite inexpensive and works well enough, so I have no complaints. The Thin Connector. I strongly recommend it to anyone who plays with
View detail
useful tool
Because modifying the circuit of the motorcycle requires the use of amon's wire processing pliers. After searching for a long time in China, there is no suitable wire crimping pliers. Later, I found amon's wire crimping pliers and modified wire terminals on webike. Perfect fit, can't be pulled off by hand, very strong. -------------------------------------------------- -------- Because the circuit of the motorcycle is modified, I need to use AMON's wire machining pliers. I have not been able to have a suitable threading pliers for a long time in China. Later Perfect matching, can' t pull it down with your hands, very strong. Powered by Google Translator View detail
Used in License lampWiring
The feel is the same as the normal Size ones, only Smaller because it is for fine lines.
This time I was forced to buy it for the terminal Crimp of Led License LampWiring.
Is the reason it is more expensive than the regular Size ones is because there is less demand for it?
I think it will be stored in the tool box for the time being, just this one time.
View detail
Fits: Others 0.13 - 6.0mu coating, HARLEY-DAVIDSON 0.13 - 6.0mu coating
Good product
It is useful when taking power supply because you can peel off the skin from the middle of Wiring.
It is safe to use as it does not damage the core wire.
Live wire work will be fine below 60V, but not below 600V. I was electrocuted w
When working, just a light grip is all that is required.
5.It seems to support up to about 5sq 8sq.
View detail
Can use
Purchased to Crimp Bullet Terminal cleanly.
Wiring for additional electrical components, etc., should be connected via Bullet Terminal.
It is easy to remove later. It also looks better.
It is difficult to make a fine line without this product.
It was nice to be able to buy the corresponding tools right away.
It feels fine and looks like it will last a long time.
View detail
Custom
It's useful for peeling thin wires without worry. View detail
It can be used for a long time.
I've been using it for almost 30 years since I bought it, but the sharpness hasn't changed. It is a necessity for playing with electric equipment. If you buy a good tool from the beginning, you can use it for a long time. View detail
Wiring essentials
Code Peeling Tool
If you lightly grip it, the cord is clamped, and if you grip it all the way to the end, the cord is stripped off
You need to have a certain amount of wiring length to pull the peeling type by hand But because this can be peeled off if there is a cord of about 3cm, it comes in handy for short wiring etc It is
However, if you use the wrong wiring size, you'll end up cutting the inside of the stranded wire Caution
It's a reliable and well-established manufacturer and I've been using it for a long time
View detail
It can be used normally.
I was attracted to cheap and bought it.
I could perform cutting of Wiring, film peeling, crimping of terminals without problems. Until now, I used Radio pliers and Pliers to process Wiring, but when I use a dedicated tool, the workmanship is still different.
Electric Works Pliers was the first purchase, so I can not compare it with other things, but I think that it is not a bad thing because I was able to do the Wiring process normally. If it is occasionally used, it seems possible to use it without problems.
I kept it in an outdoor warehouse, but it rusted considerably. It is the rust condition of Level same as Haku-ya's tool. It seems better to care for frequently.
Although it is a difficult point to rust immediately, workability and completeness of Wiring processing is high as there are only special tools. Blinker exchange, Headlight exchange etc. etc. Those who are considering the Custom of the electrical system of I think that there is no loss.
View detail
Although it is a famous Vessel in a Driver, a Wire stripper also has a good thing which works. This product has the high true circle accuracy of a cutting edge, and it can skin only covering with スパ っ, without a solid wire/strand damaging 芯線.
Although it is a famous Vessel in a Driver, a Wire stripper also has a good thing which works.
This product has the high true circle accuracy of a cutting edge, and it can skin only covering with スパ っ, without a solid wire/strand damaging 芯線.
Since there is also correspondence 線径 with a sufficient Balance to 2.0 mm, it is good for 電装 work of a Motorcycle exactly.
The direction which a price is also reasonable, is working somehow by filefish き穴 of a Nipper or a Pliers, and thinks it that workability is bad carries out the Recommendation of using exclusive elegance of this sort.
View detail
Since it is only small terminals, the connectors of a motorcycle are necessaries for caulking just.
Since it is only small terminals, the connectors of a motorcycle are necessaries for caulking just. View detail