Reviews
Not this product, but...
I purchased a TONE HexagonalBoxSocket insert angle 6.35
To replace the Screen of HondaCBR1000RR-R, as shown in the photo.
Buy a round Handlebar and turn the 2mm Bolt to work
Smoothly, it's done.
View detail
CBR1000RR-R uses this
The Rear Axle Nut of the CBR1000RR-R is 36mm in diameter.
The tightening torque is also high, and a box with many angles was used, but it seemed to come off, so we changed to a 36mm hexagonal box.
At the same time, I also purchased a pure STD Nut with it. I think I was able to buy peace of mind at a reasonable price with FirmlyFit. I think I was able to take countermeasures before I got injured, although I am satisfied with myself.
View detail
Replaced with a reliable manufacturer's product for future Motorcycle tinkering.
[How is it used?
I used to use a tool sold at Home center, but I was licking the Nut and so on.
We purchased this product as a reliable manufacturer's product.
Was the one you received as per Image?
Matte texture, Laser marking and was as per Image.
How was your experience with it?
The dimensional accuracy is also no problem at all, and it is good to fit Snap to Nut.
Matte texture also fits well in the hand.
How did it compare to other products?
It is a world of difference from the inexpensive tools sold at Home center. A little more.
I regret not buying it earlier.
Requests, etc. to Manufacturer
When the tool box is stored upright, it is unstable because of the protruding hinges,
I would like to see a structure that does not stick out.
View detail
It's a good thing to have.
The socket system was unified with a 3/8 socket angle, but only Impact had a 1/2 size socket angle, so we could not share the same socket. I bought this one because it is cheap and can be shared. I am not dissatisfied with the quality and usability. View detail
3/8Deep socket
Other than that, it is usually possible to set the Socket to Quantity:I wanted a Deep socket since I have it as a Set. I purchased 6 types of this product for my needs of Size, 8, 10, 12, 14, 17, and 16 (Plug socket). 。 The Bolt and Nut are firmly supported when tightening and unfastening, and I felt a sense of security when using the Bolt and Nut. 。 Also, the size markings are clearly written, so they are easy to read. I just started using it, so I am not sure about its durability, but it is well made, so I do not think it will be a problem. 。 I am very happy with it View detail
Used to disassemble Clutch in LETS4Palette
I bought this because I needed it to loosen the 34mm nut when disassembling the Clutch on the LETS4Palette.
I chose this one because of its high cost performance, and I had no problems with its functionality or strength.
View detail
Ordinary Socket
One day I looked at the Socket set and found that the 10mm was missing, which I assumed was lost because it was used so frequently.
I purchased the SK-11 as my first choice.
It came out of the tool box after purchase. I don't care how many I have, I will use it as a Socket for Touring's tools.
View detail
The stuff is good.
I had left it to the dealers, as I could not see the position of the plug under the tank on recent motorcycles, but I bought it to replace the Eliminator125 plug after a long time.
I chose the one that fits Plug without thinking, but the product precision is excellent and beautiful.
If you fit it directly to the Plug, it goes in easily and with very little play, Wrench is easy to handle.
View detail
Tools used only occasionally are SK11
I use basic KTC and Tone for tools.
I use SK11 for tools that are used only occasionally.
Insert angle of this Deep socket:6.35mm (1/4Inch) Purchase
Sprocket Coveretc.It is necessary to remove the bolt that is deep in the bolt, and it is necessary to remove the bolt that is deep in the bolt.
Frequently used insertion angle:9.5mm (3/8Inch) Deep socket in the
If you try to use the 8mm, the Ratchet Pouch opening will be
It's thicker, so it hits the Cover.
So, insertion angle:6.35mm (1/4Inch) will be needed
But I don't use KTCetc. so I don't want to buy KTCetc. for my Wallet...
Thank goodness for SK11's Socket
Reliable quality at a reasonable price
I use KTC and Tone where I hang Large Torque.
The parts of SmallTorque that are not used much are supplemented with SK11.
View detail
Expect durability
I bought this because my long-time Socket was getting a little licky. 900SS Cowl removal is 4mm, so I use it a lot. I tried it out right away and the new one chews very well indeed, no more worries about Bolt licking it. View detail
This eliminates the need to search for tools.
Rose and kept it in my toolbox. Separate from the tools for my main job,
It is stored in the Motorcycle garage. I use it by hooking it to the Neodymium Hook as shown in the picture, considering that it is easy to understand and within easy reach.
View detail
Easy to use
Purchased for Small TypeRatchet, cost performance is high with Holder set. Easy to use even in tight spaces. View detail
Purchased for Torque wrench
Purchased for Torque wrench. However, the Holder cracked rather easily if I didn't pinch it properly. View detail
Torque also has a Quantity:Set is convenient
I wanted a Torque set and found the other SK11Socket easy to use, so I bought this one. View detail
Maintenance
Quantity:I was contemplating the purchase of a set tool and it was on sale, so I didn't hesitate to buy it.
The glossy finish gives it a luxurious feel and the display is easy to read.
It is very useful for installation and maintenance of custom parts.
I think Spanner will be sufficient for some work.
The stop Bracket of the lid is easy to come off, so I made it functional Minus 1.
View detail
![Axle shaft sockets [4 sizes]](https://img.webike-cdn.net/catalogue/images/95068/yk022001_TS.jpg)
Necessities
Purchased for front axle shaft removal and attachment for tire replacement on GSX-R1000. It is very accurate, perfect fit, and safe to use. View detail
Is the length of the short method better?
I tried to make a 15-socket holder, but I didn't think about the length of the holder. I didn't think about the length of the holder, because it was about 30cm long, so I couldn't fit it in my tool box. 10-socket holders are available in the Quantity:2pc. I should have bought Set. But
It is definitely better than the Gold genus because it is made of plastic.
View detail
Poor mechanics buy toolsRose
9.The 5 tools were added in the Grip set since the number of tools has increased since the Rose purchase. The work is easy Plus No.2 Driver.
Only 1 pc.
View detail
I think it is very cosy. It is carefully made.
I have been using Quantity for many years now.:The socket adapter of the set finally broke. I was looking for a replacement, and this product seemed to be the cheapest and the most well-made, so I bought it. I bought it because it seemed to be the cheapest and well-made product I could find. It fits very snugly and is easy to remove, and I think it is very cost effective.
I don't know about durability, but it looks good, so I gave it 5 stars.
View detail
Used with Axle Nut
No problems with this product. I use it with Axle Nut on my off-road motorcycle.
For a moment I thought about substituting Pliers, etc., but then I thought, well, I'll just buy it and add another Socket! (Lol)
SIGNET is a Brand that I trust, so I chose them first based on cosmetics. The performance is also fine.
View detail