Reviews
Effective use of space
Purchased to organize Garage.
Type B has a deep hooking area.
It will not roll off even if you hit your head from below with the Helmet hooked on.
Recommendation is to install it in a position where it will not hit the head.
View detail
I purchased Repeat
It is installed in the garage as a Helmet Hanger.
It can be easily installed with two wood screws and is strong enough.
It would be difficult to hang anything heavier than the Helmet, but something around 2 kg would be fine. I use Tape to cure my HangerBody and hang my bicycle Wheel on it, and it is just the right amount.
It is very useful for me, because it is important to make the best use of space when I have a lot of things to do.
View detail
It is still convenient.
I bought an extra one because it was so convenient:a combination of a LuminousPole 25mm, extended to the ceiling and fixed with Screws, and two additional Helmet Hangers. The only thing Minus is the high price. View detail
If you're looking for a cospa
I was worried about SHOEI's product, but decided to go with this product for its cost performance.
It may be a little small, but since it is used as a Helmet Pillow, I don't think it will be a problem.
View detail
A stand for drying the interior with a fan
Purchased for a platform for drying Helmet's interior at Garage.
To the touch, it feels like it contains buckwheat straw used for pillows.
The outer diameter is smaller than expected and the helmet is not as stable as expected, but there are no problems when using it.
View detail
easy to find a place to put things
The pole extends from the ceiling, so there is no need to worry about where to place the helmet. It may seem a little expensive, but it's convenient, so I don't blame them. View detail
As an effective use of space
This product allows for effective use of space.
I think the price is cosmetically good for a dedicated Helmet hanging.
Installation is by Screw only, so be careful with the substrate.
View detail
Convenient
Installed on Steel racks.
The Helmet takes up a lot of space, so this product can be used to hang it on the wall.
Space can be used effectively. It also eliminates steam after use, killing two birds with one stone.
View detail
Convenient for storage
I installed it on my Steel racks and the stability is outstanding. Because it is a Helmet that takes up a lot of space, it is very convenient, and because it can be stored in a place with a height, ventilation becomes good, and it becomes a good environment for Helmet. View detail
Efficient use of space!
Purchased to secure storage space.
We usually have 3 Helmet in Metal rack.
I was wondering if I could somehow store them well, when I found this product and bought it.
I was able to store the Helmet in the Hanger rack without any trouble, and I was able to free up one whole Metal rack.
The product description says that it can be used up to 3 kg, so I use the extra part to hang the Backpack with the S-Hook.
The Jet helmet weighs about 1.4kg, so it should be about half as heavy as the Large helmet.
I do not feel that it is badly made. It is thin, so if you put a heavy object on it, it will bend a little.
We used this product in Metal rack and our impression is that it is satisfactory.
I just installed it, so I'm not sure how durable it is.
Since it is a Plating, daily maintenance will be a Large thing, won't it?
View detail
Satisfied
I like the design and bought it. I painted the color White. No strength problem. I did not want to scratch the wall, so I fixed it with Pin. It seems to be no problem. View detail
easy to use
I installed it on the wall of the entrance. I think it's easy to use. The color is only Black, because it doesn't match the wallpaper. "Glossy White. I painted it DIY with a White type setting. View detail
Also recommended for Helmet's Display!
I recommend this to anyone who wants to display or store their helmet on the wall. I used 4 of these to hang my helmet on the wall like a showroom. View detail
Helmet storage!
When I was having trouble storing my helmet, I found DOPPELGANGER DOPPELGANGER:DDS534-BK
Discover the GarageOne pole rack:2pc. SetBecause I needed another Helmet Humber to install it, I bought it I am satisfied with the product
View detail
Used to organize the Transporter
I wanted to create a fixed position for the Helmet in the Transporter, so I bought it
I have a board on the High ace Rear window and I fixed it to it
I've only driven about 100km since I put it on, but it doesn't fall off while driving and holds up well They do
I fixed it near the rear so I can hang the Helmet during the practice break
View detail
Wall hanging Helmet holder
As the number of Helmet has increased, I was looking for a product that can be hung on a wall to secure a storage location, I found this product.
A and B, 2Type, but I bought a Type B.
Installation is 3. I attached it to the board with 5? Diameter tree Screw.
It is shaped to hold the inner side of Helmet exactly.
It was a better product than I expected, so I'm planning to add it.
View detail
I like it..
As a pedestal for Helmet's Maintenance,
As a pedestal for storing Helmet,
very convenient.
There seems to be a deodorizing effect, so I can expect it in the future.
View detail
Display Helmet on Fashion
Purchase Helmet you've put in the Color box so far, trying to hang it on the wall.
Although it was okay to DIY it selling to Home center,
In trying not to damage Helmet's interior, it takes time and effort other than
Purchased the exclusive item here because it was anxious about the appearance when not hanging Helmet.
Although it is a story whether I can pay 1,500 yen for just bending a steel plate,
Bending, drilling, BALI removal, painting etc... It takes labor and cost as you go
I think this price setting is reasonably affordable.
I am happy that 2 Pattern is prepared according to the shape of Helmet.
Displaying on Fashion, storage Space was created in the place where Helmet stayed until now,
Cool state even in the state of elementary.
Items I'd like to recommend to all Riders suffering from the placement of Helmet.
View detail
The actually used comment are 1. A helmet will also become an interiors if it puts on the room! Two Breathability is good after rainy weather use! 3 places are not chosen! It purchased in order to use it at a garage, but it is used in the company now.
The actually used comment are 1. A helmet will also become an interiors if it puts on the room! Two Breathability is good after rainy weather use! 3 places are not chosen! It purchased in order to use it at a garage, but it is used in the company now.
Especially after rainy weather use demonstrates an effect.
It is one article recommended to the person of motorcycle commuting and attending school.
(boorish)
View detail