Reviews
Products you need
Quality and texture information Rubber-covered wires be adequate in length for use Design Information Loop Wire Size Chart Information 44 cm Good cost performance and comparison with other products WeBike packaging is always great, arriving in a week for delivery and packaging Concern, caveats or advice on purchase The helmet holder on the Monkey 125 is mounted in a truly ridiculous place So you can't put a helmet on without these wires I really recommend it View detail
Small but essentialItems
[How is it used?
It is used for CBR1000RR-R.
Was the installation difficult?
Installation is very easy as it is simply secured with the OEM Bolt that holds the Tandem Footpeg in place.
[Was there anything that disappointed you?
No, it is not. It is an indispensable item, as many OEM cars are equipped with it these days.
View detail
Cl500
I purchased a wire-type helmet fixing lock. It can be fixed to the main body, and it doesn't seem to shake because it's at the rear. In reality, it's not that small. There are also two keys, one to use with a motorcycle key ring and one to keep at home for emergencies. I recommend it ------------------------------------------------ ---------- The helmet fixed lock was purchased as a wire type and could be fixed to the body, and it was unhappy because it was a rear side. I recommend it Powered by Google Translator View detail
Easy to use
Loading the Pannier case makes it difficult to hang the Helmet on the Holder, but it can be easily locked.
In the case of crf250l, the Holder seems to pop out to the side due to its shape, but it eliminates interference with the Body and makes it easier to remove.
View detail
HURRICANE Helmet lock
Helmet lock made by KIJIMA until now 。 The Helmet lock made by KIJIMA had to use a Helmet holder, but Made by HURRICANE can be locked without using a Helmet holder because the installation location can be decided relatively freely. The KIJIMA Helmet lock had to be used with a helmet holder, but the Made by HURRICANE can be locked without using a helmet holder because it can be installed in any position.
The U-shaped part that moves when locked is the Quantity:Pair (for Left and Right) The lock hole was not always easy to get into, but this was not a big concern. However, it does not bother me that much. I think Merit is a very good product because it is larger than Merit and I don't have to use the helmet holder anymore.
View detail
problem-solving
I'm a Grom driver.
I have just purchased a high-end helmet, and I couldn't leave it hanging in the mirror, so I came across this product and purchased it immediately.
The Dial key is a good click feeling, and the Helmet can be attached and detached quickly.
I'm glad I bought it
View detail
Fashion and practical
It is used together with Helmet lock for DL1000 V-STROM250 only.
It is for SHOEI's Ratchet lockHelmet, but I like the SMART design better than the Universal Type, so I use it on OGKCUBE's RYUKI and WINS's A-FORCE RS.
I love the bright AnodizedRed in Fashion! (In the photo I uploaded, it looks orangey, but with the naked eye, it is really bright bright red.) 。
This product requires a little extra effort to attach and detach, but it is worth it for Smooth attachment and detachment.
Conversely, I'm not satisfied with Body's Spec. which makes it difficult if I don't bother to buy this, or I feel something like MatchPump….
However, it is inexpensive and looks good as a Key HolderAttachment, so I am satisfied overall.
View detail
As if OEM Parts
[How is it used?
Is it normal for Austrians to carry a Helmet when they get off their Motorcycle? Or is it the result of a thorough pursuit of weight reduction? The answer is a mystery, but as a Japanese, it is inconvenient for me because KTM motorcycles are not equipped with a helmet holder as a standard equipment. That's where our KIJIMA-made helmet holder comes in!
Was the one you received as per Image?
Bracket that looks like it could be made by yourself and Quantity of Universal Helmet HolderBody:It is a Set product. But if you make it yourself, it is troublesome, so it is faster to buy it. (Lol)
Was the installation difficult?
The OEMBolt is tightened so firmly that it is difficult to remove the Tandem FootpegBracket. After successfully removing the bracket, apply Screw lock fluid to the Bolt supplied with the product, and tighten the Bolt in accordance with the Instruction Manual to complete the installation.
How was your experience with it?
Convenience is the only word that comes to mind.
[Included Parts:were they on?
A special Bolt and Spacer are included. And KIJIMASticker as a bonus.
[Was there anything that disappointed you?
In case of installing Shoei's Z7Helmet, when hooking the D Ring to the locking part, it is a little troublesome because it has to be operated in a small space.
Other items that would be helpful
Availability and clarity of Instruction Manual:The work procedures are easy to understand because they are explained step by step with drawings with pictures.
Items to buy together:Screw lock liquid
View detail
Helmet lock
The CT110 HUNTER CUB has only a poorly used Wire Helmet lock.
There is no particularly difficult work, just remove the Seat and co-tighten it to the mounting area.
In terms of feel, I think the performance required of the Helmet lock is sufficient.
When used, Helmet will directly touch the car body, so it should be cured if you are concerned about it.
View detail
Helmet lock
Good quality and stylish look. Main thing is user friendly and quick use with out any key.even we can choose different colours according to body colour. While mounting everything things are including even different sizes of screw as well . Locking cable length is completely inough.highly recommend. View detail
Might have a little hang to Dial match.
The shape is Compact and I am satisfied with that.
However, the engagement of the lock seems to vary from person to person, and mine has a little gap, so I put tape over it to fill the gap.
I chose Dial type because it is troublesome to take out a key every time I use a keypad, but it is a little difficult to adjust the Dial in a dark place. According to the manual, if you turn the dial in the Countdown direction, the dial stops at Zero, and you can count again from that point.
(I have a Mini light on top of the Handlebar, so I use that to eyeball it)
View detail
For those who want to create a sense of unity in the body of the car...
ADV's standard helmet holder (The one that hooks under the Seat) I was using a type of helmet holder that attaches around the handlebar, but when I installed the OEM grip heater, I could no longer use it and had to remove it, so I purchased this one.
It is only Exclusive Design, and it has a shape that blends in with the car body and looks good.
However, when the Helmet is applied in the Side Stand state, it is ... low!
As you can see from the pictures, there is quite a bit of leeway with the ground (lol).
I wonder if there would be a little more leeway if it were applied in the Center Stand state.
The rest is nothing special, so I think it is a good thing.
View detail
Fits: YAMAHA BOLT R, YAMAHA BOLT, HONDA REBEL1100, HONDA REBEL250, HONDA REBEL250 ABS, HONDA REBEL500, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400 CLASSIC, HONDA Rebel300
If you're not careful, you can dent the Tank.
When the handlebar is pushed all the way to the Right in the open position, it contacts the tank.
I got a dent in my Tank with it.
I removed it because it would have been disastrous if I had inadvertently left it unlocked, although it would have been better if I had not left it unlocked.
View detail
Free from OEM hassles.
The OEM helmet holders are notoriously difficult to use on the GSR, but since it is an old motorcycle, I didn't think they would have any model-specific products in stock, but they did, so I bought one right away.
Then, it was installed immediately.
The work took only three minutes.
Depending on the type of helmet, the position of the bracket may be difficult to fasten, but I think it looks good without feeling like it has been retrofitted.
With OGK's CUBT KAMUI III, I thought it would be a little difficult to insert and remove the key after fastening it. But considering the time and effort required to remove the OEM Seat each time, I am satisfied with the product.
View detail
Satisfied with the ease of use:??
I installed it on the center of PCX125 MININarrow handle. It is not so much assertive and casual feeling is good. On the other hand, the dial is a little bit small and difficult to turn, and the hooked part is also small, so I am a little afraid of dropping the helmet. View detail
It was just as comfortable as I expected it to be.
The OEM helmet holder was no longer available when the side bag was installed, so we installed it.
OEMHolder, if you pull out the key while Helmet is on, the bar will come off and Helmet will drop.
The structure was difficult to use, and it was difficult to use the Large change.
This product will hold the Hook even if the key is removed with the Helmet applied, so the Helmet will not fall.
It is usually easy to use.
The drawback is that it requires one more key, but this is the same for all retrofit products, so we have to discount it.
View detail
perfectly (suited)
It can be attached by simply removing two bolts from the bracket of the Tandem Footpeg.
I'm sure that can be stolen for that, but the same thing goes for the locks on the OEM on the other side.
We have converted it to one-key (can be opened and closed with Motorcycle key) by referring to other sites.
View detail
Easy to use
Tandem Footpeg and co-tightening
Although from a working point of view, the Hexagonal Wrench is sufficient,
Since the front side is difficult to turn due to the swing arm and rear damper, it is more efficient to use a ratchet wrench.
On CBR400R, it was unstable without Tandem Footpeg in Helmet,
Visor could be scratched.
In the CBR650R, Helmet will be riding on a Tandem Footpeg,
It is stable and easy to use.
Required tool
Hexagonal Wrench 8mm
View detail
Fits: HONDA PCX125, HONDA PCX125 Hybrid, HONDA PCX150, HONDA PCX160, HONDA CB125R, HONDA CBR125R, HONDA CB250R, KAWASAKI Z125-PRO, HONDA PCX125 E:HEV, Others , YAMAHA BWS 50, YAMAHA BWS125, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA MONKEY125, HONDA glom, HONDA CROSSCUB110, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA CL250
Helmet holder installation condition
ExactSize, looks good and no problems!
Also, when you leave the Motorcycle for a moment, you can easily lock it to prevent theft.
View detail
Use of Helmet lockAssist is recommended.
Remove the Tandem Footpeg Bracket once and install it between the body Frame and Bracket.
Other manufacturers seem to have the same mounting position, but the one made by KIJIMA fits inside the bracket, giving the impression of being Refreshing.
On the other hand, attaching and detaching the helmet is somewhat troublesome, and if you are not used to it, you may tend to hit the vehicle body or rider's tepe, so we recommend the use of the Helmet lockAssist made by the company.
In addition, I am concerned that the position of the Center Stand legs just touches the interior material of the Helmet….
We recommend this product to those who can find merit in its good fit, etc., after comparing it with other products that are attached to the mirror section or handlebar.
View detail