Reviews
everyday use
The chinstrap is a type that goes through the buckle, so it is difficult to use.
Also, the design was a little old-fashioned, but it was inexpensive.
It was good
View detail
Might as well take the first step...
When I was looking for a model with Inner Visor, SHOEI was expensive and KABUTO's Graphic was not to my liking (Pin lock is not standard either!!!). So, when I was wondering about it, I came across it.
I was worried about the fitting for FOR JAPAN MODEL, so I checked it at the store where the actual product was placed, and the fit of my head, which is usually M for SHOEI and M for KABUTO, was just in the middle of the Image for LS2 (15 minutes wearing).
After actual use (about 6 hours of rest every hour and a half or so), I was able to use it without any concerns.
I would have been happy to give it 5 Stars,
Paint may be weak...Paint was chipped off by tipping (I don't remember any domestic model having paint chipped off by tipping).
As other people have said in their impressions, the air flow from the upper Intake to the domestic MODEL is very small, and the air flow from the upper Intake to the domestic MODEL is very small.
It is difficult to feel (? not to say it is not effective, but it is difficult to feel)
Therefore, we gave it 4 stars.
However, considering the design and price, I think it is highly satisfactory.
View detail
JapanManufacturer reaffirms its excellence
Bagnoia MODEL has a 22-year Replica. (In Japan) I bought it right after it was released, as it was a fulfillment of a long-cherished wish that I had had for over two years, as it had never been released. The shape is completely different from JapanManufacturer's, and the parenthesis is very nice. However, the functionality is not as good as the JapanManufacturer.
Size Sensation
Larger than Arai and SHOEI.
The Cheek Pad is quite tight, but other than that, the entire head is not held except for the cheeks, which are large. The entire head is not held like in Japan, and the shallow fit makes the wearer feel uneasy about taking off the head at high speeds.
I was a medium size.
The wearing feel is completely different from Arai and SHOEI, and is similar to AGV, including the Size feel. (No experience wearing Manufacturers other than Left Ki).
The Arai L size is my usual favorite, and although it is slightly larger than the Just size, it does not gap at high speeds. It does not give me any headache and is an ideal fit.
Large size of the cap
The cap size differs between M and L, so it is quite Large compared to Arai's L. (Arai caps are the same for M and L)
[Weight
It is light for its large size, perhaps due to the use of carbon in some parts, but not enough to impress.
Finishing
Do not expect the quality of Japan.
[Shield]
The Shield itself has no distortion, and its resistance to fogging is much better than Arai. The Shield itself is not distorted, and its resistance to fogging is much better than Arai's.
Wind Cutting Sound
Quite Large compared to Arai, uncomfortable. I was surprised at how different they are.
[Ventilation
Arai's RX-7X is far superior. In the first place, I couldn't feel the wind escape at the top of my head….
【Review】
It must be a pretty good product for the price." If you buy it thinking that you will regret it, you will surely regret it.
Design is good, so I think it's Collector's Items or something to show off to those around you.
Arai's RX-7X, which is less than half the price, is far superior in terms of functionality. The only thing I felt was better was the Shield connection.
Ironically, it was a kick-ack reminding me how great JapanManufacturer is. I am an AraiUser, so perhaps I feel that way more than I should.
View detail
Helmet that I finally came across
Until now, I have been fitting a FOR JAPAN MODELManufacturer Helmet in Size XL with adjusted Sponge.
The thunder c gp is Fit with no need for that adjustment Sponge.
I was able to try on the L size at Events and was surprised to find that the fit was the same as the unadjusted and adjusted Helmet.
And now we have purchased it from webike.
The product description stated that it was made to fit the Japanese skeleton, but I was told by a manufacturer that my head was a M size in width and XL in front and back, which is close to the shape of a Westerner's head, so for me, the product description was a lie in a good way (laugh).
But this frees you from the tedious Sponge adjustment.
It was about 400 Grams lighter than the Helmet I was using at Main, and everything was easier from the neck down.
It is surprisingly light.
I can't go back to other helmets.
Included Parts:Including Helmet Bag, Smoke Shield, Tear off, Helmet Pillow, etc. are abundant and very reasonable.
However, unlike JAPAN, Smoke Shield seems to be for Westerners with blue eyes who can see well in the dark, so I, as a Japanese, do not use it because I cannot see well, and buy Light smoke.
Seiden, I would appreciate it if you could include light smoke if it is available as a choice at the point of importation.
Upward visibility is very good when getting down at full power in Circuit.
However, there seems to be a GlassesSlit, but I have some difficulty plugging it in.
I chose Carbon for the color, but I am using Material:I don't care about Carbon Style, so I would be happy to have a Graphic one.
View detail
It is outstandingly light!
Was the one you received as per Image?
It is cooler than it looks in Catalogue.
[How did you feel about the Fit?
It seems to be a Japan-only spec, but the inner pad is harder than the Japan product.
It is hard and rough and has a low Fit feeling.
How was your experience with it?
The lightness is outstanding, I always had neck pain with SS, but my head was light and easy.
The aerodynamic characteristics are also better than OGKShoeema.
Wind Cutting sound and quiet characteristics are normal.
What are the specifications of the product?
Ventilation is normal within legal speed limits.
Included Parts:is a good value for the money.
It even has a Dark smokeSeal, Pin lock and ShieldFilm.
[Was there anything that disappointed you?
When the Shield lock is opened by Button type, there is no flange on the Shield.
It is difficult to open.
The cap is not compatible with wireless microphone.
Fit feeling is quite low. 。
How did it compare to other products?
Material at this price:Carbon products are not found in domestic products.
It is lightweight and has good aerodynamic characteristics.
The interior quality and fit feel is low.
Other items that would be helpful
Deciding Factors for Purchase/Included Parts:Presence or non-existence of Included Parts/Points to Note/Opinions and Requests to the Manufacturer
Rear spoiler is available as an Option.
View detail
Helmet with excellent cost performance
This is mainly a comparison with OGK's Camry III, which I have been using, but I think it is a suitable comparison since it is a Helmet in the same price range.
First of all, the Forme is very similar, but the G-Force is a little longer front to back. The G-Force looks a little larger than the G-Force, which may be due to the color.
As for the weight, I don't have a scale that can accurately measure it, so I hold it, but the G-Force feels a little lighter than the G-Force. When covered, the difference is not felt.
As for the fit, I think the G-Force is a little stronger against the Cheek pad and forehead, but I did not feel any pain anywhere even after wearing it all day. Both have GlassesSlit, but while the Glasses wobbled in the Camii III, the Glasses are stable and do not move in the G-Force. The entire interior can of course be removed and washed.
The chinstrap is a MicroRatchet, so the usability is the same, but the G-Force has a ring that hooks onto the helmet holder too close to the helmet, making it difficult to fasten it to the holder.
The G-Force speaker holes are pocket-shaped, so there is no need to fix them with Magic tape or double-sided tape. Wind Cutting sound is a bit louder than the Camii III, but the Speaker is closer to the ear, so the sound from the Speaker can be heard rather well.
Ventilation is the same level as Cam III, and it can ventilate to a certain extent.
Shield is standard as Light smoke (very light color), and Option [Color] There does not appear to be a Clear setting. When you register your product, you get an anti-fog Seat called Fog WINPlus, but even without it, it is hard to fog up because of the large space around the mouth and the distance to the Shield.
The Inner Visor covers almost the entire field of vision, and the lower edge of the Visor does not interfere with the field of vision. You can take the Visor in and out without any problem with the Gloves on.
I think Cam iii is also very cosmetic, but G-Force is even more cosmetic because you get an anti-fog Seat and it also comes with a Chin curtain, NeckShutter, Breath guard, and a muffled Ear Padetc. for when you don't use the Speaker! The overall build quality is also very good, especially the cheapness. The overall construction doesn't feel particularly cheap, and I get the feeling that a lot of attention has been paid to the details.
View detail
Inner Visor. [Color] Can be changed to Clear.
I would like to share with you my impressions on the day I received the Helmet,
Size is currently using two SHOEI Z-7s and an XR-1100. The Z-7 is still in good condition with no interior wear and tear, while the XR-1100 is 12 years old and the interior is thinning like seasoned seaweed.
The size of this product is M and Z-7 is also M Size, but Z-7 is more Tight (cheeks).
The lightness felt like there was no difference in the experience. It is a little strange.
I chose this product because of its price, design and [Color] The Inner Visor of Clear can be used. (Mirror shield and [Color] (ClearInner Visor was also ordered at the same time.) I've been wondering what helmet to get next for about 3 years, and this has been an option for quite some time, but recently [Color] I felt like I knew I could use Clear's Inner Visor and decided to go with it.
The only thing that bothered me was that there was a stain on the synthetic leather on the underside of the Cheek pad. The Cheek pad is not visible once it is covered, so there is no problem, The Visor is also OK because I don't use it often and I don't feel like I can tell when I test drive it. I am satisfied with Large because I got a good product at a low price. I can finally retire my XR-1100.
View detail
Buy Full face because of the cold weather
Was the one you received as per Image?
Street Image
[How did you feel about the Fit?
a little tight in the cheeks
How was your experience with it?
Lighter than it looks and less neck fatigue
What are the specifications of the product?
[Was there anything that disappointed you?
The drawback is that the chinstrap is not one-touch.
How did it compare to other products?
I wanted a Simple Helmet and chose this one.
I usually use a Jet helmet, but it has a roomy mouth for a full face, which reduces the tightness.
View detail
M-930 Helmet
About the feeling of use Very confirtable Cost performance and comparison with other products Fair for the money About shipping and packaging fast shipping no way to dammage View detail
Fit feeling is good for a foreign-made Helmet.
Many foreign-made helmets, even AsianFit, are narrow for Westerners, and when worn, there is often a feeling of pressure from the SIDE and an impact on the ear area when putting on and taking off.
I feel a little pressure around Teak, but I don't mind it because I expect it will wear out after use.
However, the cap appears to be slightly larger in size, so from a third-party viewpoint, the silhouette is a bit too big for the head.
The paint job and interior texture are good, and the design resembles Armour's Helmet, which appears in the famous game "H◯LO.
The PeakVisor is even more similar, but this Visor is difficult to use. It may be a matter of getting used to it, but when I tried to close the open Shield, I accidentally picked up the Visor and couldn't close it. "What? It won't close!" This can be the case.
Shield also seems to be slightly distorted in the forward direction.
In addition, the Knob for opening and closing the Shield is located directly in front of the Shield and is small, making it difficult to pick up and operate depending on the Gloves.
Weight-wise, it is hard to judge since it is the first full-face, but looking at the Specifications, I think it is slightly heavier.
Considering the price and other factors, I think this is a well-made product overall.
View detail
One-Shoulder Helmet
The cap is thin, the chin is high, and extremely beautiful.
The inside is wide for being narrow, and the L is about the same size as a GramStar XL, and it is extremely lightweight.
While many of the helmet styles have unusually hard hooks to hold the shields, these are loose and not at all stressful to attach and detach, so they can be easily snapped on and off when you do not want them to float, such as when driving at high speeds.
However, the Shield cannot be fixed open and always closes under its own weight, so it must be lifted and held by hand to prevent fogging when waiting for a traffic light in winter.
View detail
Cost performance is the best
I own helmets from various manufacturers, but the LS2 is my top choice.
The size feeling is the same as FOR JAPAN MODELManufacturer. It feels lighter than the published value and there is no burden on the neck.
Inner Shield is also easy to operate and ready to use when the need arises.
Above all, CarbonHelmet is really excellent in cost performance at this price.
The distributor, Seiden, also puts a lot of effort into after-sales follow-up, so there is no need to worry about being an overseas manufacturer.
View detail
Value for money! I am happy to get CarbonHelmet at a reasonable price.
Air ventilation is quite good. It did not cause my hair to steam. The Inner Shield is so close to my face that if I lower it fully, it hits my glasses and cheeks, so I try not to lower it all the way. I am satisfied with the CarbonHelmet because it is inexpensive and looks good for a carbon helmet. It is hard to evaluate the strength of this helmet because I don't want any situation to occur. View detail
Lightness and cosmetics
This is the third Helmet from WINS, and it is quite good in terms of comfort, lightness, and appearance!
I used to use the Mat color of all the MODELS of this one, and the chinstrap is a little shorter than that, but no problem in use!
View detail
GlassesNG
good
The basic construction is solid.
It is smooth to put on and take off, and the head feels held firmly in place.
The chinstrap length is just right and the D Ring is easy to use.
Shield height can be set freely, and raising and lowering is smooth and easy to use.
bad
The ear area is a little tight.
No space for the glasses, making it difficult to wear them smoothly and causing ear pain.
I don't have Sun visor, so it's hard in the evening, especially on long distances.
Vent hole at the mouth was broken (no problem, so I continued to use it).
It is good for those who do not use Glasses and want an inexpensive, solid full face for short distances.
View detail
Terribly light.
【good point】
It is terribly light.
M Size cap weighs 1,380g (±50g) but you can use the Inner Visor as a
The lightness of this product is amazing even though it is equipped with a
We are no longer satisfied with other Helmets in the same price range.
I am not tired at all.
Combined with the lightness mentioned above, it is almost impossible to wear it for more than half a day.
You will not feel fatigue.
Income is easy to install.
I use B+COM ONE, but also Base plate for Body
The Speaker can be installed without any difficulty and the Speaker is mounted over the mounting recess.
The interior material, Mesh fabric, covers it and makes it comfortable.
It is inexpensive.
Material with Inner Visor:CarbonFull face helmet is
The cost performance of less than 50,000 yen is excellent.
Is there any?
[Lamentations.
Wind Cutting noise is too loud.
Income hearing is hindered at 60 km/h or more.
It lacks a sense of ... Fit.
I tried to get used to using the MSlim because I felt loose in the M Size,
The discomfort is only increasing as if a finger is pressing down on my cheek.
The Sponge in the Cheek pad can be adjusted by removing and cutting the Sponge.
It is said to be for sale, but on the contrary, it is a revenge and Sponge's position and shape cannot be determined.
I feel as if it is.
【Review】
It is a good cosmetic product.
If you like the design, you can't go wrong with it, but you need to choose the right size.
It is better to pay attention.
View detail
So-called Lee Vise or Fender's Replica
The spec. of STAR II for RepairPivot kit has been changed and it is no longer usable at all. (This is the Size XL version of the company's 100R, which is different from the 200R.)
The head is about the same size as GramStar's XL, and the cheek pad is slightly tighter.
When it is lined up with STAR II, the logo of "O-Decoration" (it is a seal, so it is claimed that it can be peeled off) and the overall forme show a lack of confidence, and the chinstrap has a One Touch Buckle and the edge rubber is in a strange position, which are not so nice in accordance with the price. The jaw strap is One Touch Buckle, the edge rubber is in an odd position, and so on.
View detail
I will never buy LS2 again.
Was the one you received as per Image?
I bought it because I fell in love with it at first sight when I saw the picture on the product description Page.
But the product I received was Black, unlike the picture.
I would not have bought it if it was this color.
Manufacturer claims that there is no problem because of the light and individual differences.
Perhaps it would be Silver like the description Page if it were shot using a photographic Light stronger than the direct sunlight of mid-summer noon.
However, this is a motorcycle helmet. Naturally, it is supposed to be used outdoors.
And this looks like Black even in direct sunlight at noon in midsummer, no matter how anyone perceives it. Helmet in Black. Id.
I doubt the good sense of the manufacturer to sell a product with a picture that looks like silver, using excuses such as individual differences and the sensitivity of the light.
For the guests (at least for me). I've been duped." I can only feel that this is the case.
[How did you feel about the Fit?
It is not AsianFit, so the top and back of my head is too much on the side of my head for my typical Asian head.
Moreover, the cushion on the side of the head is thin, and there is a groove carved into the liner in that area, and the protrusion of the groove hurts when it hits.
The narrow frontage makes it hard to put on and take off, and the cheek pad is tight.
On the other hand, if it is covered, Quantity:Pair (for Left and Right) The Fit feeling of the "Fit" is not bad, and the advantage is that the Income speaker is also close to the Plus for quietness and improved sound quality.
How was your experience with it?
Upper Ventilation is useless.
As shown in the attached photo, the head interior is fully covered.
Therefore, the head is completely separated from the wind path from Ventilation by the interior.
This would not allow the head under the interior to feel the wind, even if the wind did pass through.
In addition, if you are a person who fits your head, the Cushion on the top of your head could completely block the passage of the wind.
For now, we'll just drill holes in the cap and the liner." I have to wonder if this is the idea.
Ventilation at the mouth, on the other hand, has a large opening for better airflow.
In addition, while helmets with Inner Visor generally do not have an air inlet from the forehead due to their structure, this product has a structure that allows air to flow from the forehead to the inside of the Inner Visor, which is a notable advantage (although the effect was not felt).
What are the specifications of the product?
The Microphone storage space for Income at the mouth is kindly designed.
[Was there anything that disappointed you?
Interior sewing was shoddy, with some gaping from the center and some forgotten stitches. The interior sewing was shoddy, with some gaping from the center and some forgotten stitches.
The Speaker of Income is covered by a Chin strap.
Income mounting is not well considered, as evidenced by the Inner Visor Slide in a position suitable for Income mounting, and there is no suitable flat surface for taping (inevitable floating edges).
How did it compare to other products?
Motorcycles and wears are popular among overseas manufacturers, but when it comes to helmets, they are treated as third-rate products and not even looked at by many people, which is strange until now.
If this is the case ... Helmet of Foreign Manufacturer is no good." It is only natural that this would be the case. I learned a lot.
View detail
light
ARAIZ-7 is getting tired, so I bought a new one.
The cap is also small and lightweight, which is appreciated by large-headed people.
Wind Cutting sound from the vicinity of the Inner Visor moving lever is loud.
I have another MODEL of the old Inner Visor, but as for the Inner Visor, I think the old one is better because it shielded the light well enough.
New Model is a little uncomfortable because it hits the head of my nose. It will not be bothersome after running for a while.
Not that I have no complaints, but it is a product I would buy again.
View detail
Highly visible
I usually use LEAD's Jet helmetFLX.
I looked around to buy a full face, but I decided to go with LEAD because of its cost performance. The soft interior gives a good fit. I think it is perfect for daily use plus occasional touring.
At 1/3 the price of SHOEIARAI, I have no complaints about this construction.
View detail