Reviews
Bag Support
Used as support for DEGNER's Waterproof Bag during touring View detail
![Carrier [SR1190]](https://img.webike-cdn.net/catalogue/images/98119/23946_TS.jpg)
Fits: HONDA PCX160, HONDA PCX150, HONDA PCX125, HONDA PCX Hybrid, HONDA PCX e:HEV
If you want to put GIVI on PCX, this is the one.
Remove the GIVI E43NTL-ADV that was used last time.
Removed and discarded when returning to HondaOEM Rear box.
But this time, I'm changing the box to GIVI B45+.
Buy again (What is he doing?)
I was wondering if I should use a different product this time.
This product is still reliable and easy to install.
I bought it back.
View detail
250TRSide Back
The rotating mounting shaft is great for adjusting to fit the type of car, bag, and application. Even if the price is a little high, we recommend the inconspicuous black color. View detail
![MONOLOCK Universal WIDE Base [MP70N]](https://img.webike-cdn.net/catalogue/images/29606/94540_01_TS.jpg)
rebuying (e.g. a loan)
Purchased the exact same one I was using before.
Previously used at E43NTL-ADV
E43NTL-ADV was removed and disposed of with it when it was disposed of.
This time, I bought a GIVI B45+, so I had to repurchase it.
The standard UniversalPlate that comes with the box rattles around.
I still feel safer with Wide.
View detail
Fits: HARLEY-DAVIDSON Universal
Used to secure Tool Bag
If you use it with a Carrier, you need to be creative when installing it because it interferes with the Carrier's legs. View detail
Quality control or packaging issues
Installation is Level, which is fine for Beginner.
No special problems with the feel of the product.
However, there is a relatively noticeable scratch on the base plate section….
Was the shipping check lax, or was the packaging messy and damaged in transit?
It's not a practical problem, but ….
The mood is lowered by the relatively expensive components.
View detail
The Right Side took 4 hours to install and the Left Side took about 30 minutes.
It is a Minor old for Vehicle, so it is understandable if it takes more than a month to receive the product from overseas. There is no instruction manual, and the accuracy is subtle, but that is perfectly expected. The weld marks are clean and the plating looks sturdy. However, please don't engrave part numbers ending with "~L" on the "for Right" and "~R" on the "for Left". View detail
Parenthesis is good
The look is nice, the texture is nice, and it has Logo and Parenthesis.
It is small in size, but sufficient as a side bag support.
View detail
Fits: HONDA PCX160, HONDA PCX150, HONDA PCX125, HONDA PCX Hybrid, HONDA PCX e:HEV
If you want to put GIVITop case, this Carrier
Mounted on PCX JK05.Corresponds to all models. Some PCX models require modification, but JF81 and JK05 can be installed by removing the cover.
I bought it because I planned to install GIVI's Top case (Mono-lock) from the beginning.
It is Small and is the cheaper of the Carriers.
If you want to install GIVI's Top case, this is the CarrierRecommendation. You can even order it from authorized dealers.
View detail
Fits: KAWASAKI ELIMINATOR SE, KAWASAKI ELIMINATOR
expensive
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy
How was your experience with it?
Nothing to use, just Screw.
[Was there anything that disappointed you?
price
View detail
Easy to install, easy to use, but ….
It is easy to install and easy to use, but it looks tacky when the Bag is not attached. Also, the gap between the bag and the car body is wide, so it looks tacky from the back.
Also, the price of the separate installation kit for the OEMRear carrier is too high.
View detail
Helmet lock and Quantity:Set so very SMART!
After purchasing DAX125, I wanted to do something about the luggage space and helmet lock, so I installed DAYTONA's side bag support. If I use a larger bag, the Helmet lock will not work without a wire or something. View detail
For Side Back installation.
I tried to install it from the Left Side as a trial because I heard that it was designed for Side Back installation. The back is not visible when the back is installed, but it is solid and secure. View detail
Fits: KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 650, KAWASAKI Ninja 650, KAWASAKI Ninja 650, KAWASAKI Ninja 650, KAWASAKI Z650, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 650 KRT EDITION
Purchased to install Top case.
I have purchased a GIVI TRK52N TREKKER,
Carrier is now needed.
Carrier made by GIVI, because it is set to Fender Eliminator,
I can't use it, so I thought it was a thing that could be used with Fender EliminatorSpec,
OEM Carrier was the only choice.
View detail
DAYTONASaddlebag Support
It would have been better if the Support bar was a little shorter, but this was the only size available, so I had no choice.
Often bumps his leg when he straddles the Motorcycle.
The function is not gated at all.
Overall, we are satisfied.
View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB 50, HONDA CROSSCUB110
It's solid
We are getting bummed for the CUBCampingDebut.
I have considered and compared various side bag supports from various companies, but I chose Nana Company's side bag support.
I have decided!
It is a solid and firm installation kan tan.Quantity:Pair (for Left and Right) Therefore, it is a good value.
View detail
Fit perfectly
easy to install , just need to know how to open the left side cover so that you can plug & play the wiring which is already there , only need to remove the dummy cover View detail
Purchased without hesitation!
Purchased to add a top box.
Since we plan to install another company's top box, we could have originally purchased another company's inexpensive rear carrier, but we chose this one because of its heavy construction and design. However, considering that the Plate (sold separately) must also be purchased, the price is higher, and the cost performance is not as good as I would have liked.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS
Nice looking
They fit fairly easily with the Kijima pillion rail. The overall appearance is really good, definetly not strong enough to carry a pillions weight-so make sure your pillion understands this first rime they get on the bike. I originally had a different grab-rail installed, but it simply wasn't compatible with this product despite first appearances. Hence why I switched to the Kijima pillion rail. View detail
One Tank Bag can be used for many different motorcycles with SEA BASS
I have several SEA BASS Motorcycles and can use one Tank Bag. View detail