Reviews
Expect to see improvements with Up dates.
I used it for Touring about 12 hours, 200 km down the road. I think it looks good, has a good battery capacity, and fits well in the helmet. I had two mysterious power downs during the touring and the doughnut shaped ear pad was too thick to fit my ears properly and bent inside the helmet, causing pain. Once the Ear Pad was removed, the ear pad fit my ears with no problem at all, and I didn't notice much difference in sound quality. The Mesh connection is convenient once you get used to it. As others have pointed out, I was very disappointed that the power supply turned off by itself. I was worried that it would turn off at any moment because I didn't know the reason. I hope this will be improved. View detail
Limited installation methods for back camera
Wiring length of the back camera is halfway; 1m on the Camera side and 1m on the Extension Cord,
The Camera side should be about 30cm and the Extension Cord should be about 2m.
Unlike a driver's camera, the Body's mounting position is near the with handle, so the current wiring length requires a connector connection at the halfway point, making wiring difficult.
The Cable that connects to the Body also has a 4-point screw on the Body Reverse side, but this is troublesome to install.
With this structure, even if the BodyMount base can be removed with One-touch, when the Cable is inserted again,
Since the connector is fixed with a rubber band to prevent 4-point tightening, it is necessary to use a precision driver to remove the screws and insert the cable before fastening the screws, so the screws are left attached after all.
The four screws on this base are not designed to be detached, so if they are completely removed, the screws may be dropped and lost.
The back camera can only be mounted on the upper side of the base in the direction from which the camera is suspended, and cannot be flipped up and down in the body settings.
The position of the Fixing Screw between the Base and Camera is not in the Center, so changing the mounting direction of the CameraBody is necessary,
Difficult to set the adjustment angle downward because the angle of the Camera is Up.
I tried attaching it to the Fender, but it could only be adjusted slightly Up from horizontal.
View detail
Fits: KAWASAKI Ninja ZX-4R SE
M820WDController CT110 HUNTER CUB Brake folder Exactly for mounting
[How is it used?
MiVue M820WD Drareco Controller mounted in the Right SideBrake folder of the CT110 HUNTER CUB2BJ-JA55.
Although the name of the folder is Clutch folder, as shown in the product description photo, the folder can be attached to the Right Side Brake folder as well, effectively and securely.
Was the one you received as per Image?
Yes
Was the installation difficult?
It is easy. The angle of the brake lever changes when the brake folder fixing screw is loosened for installation. If you mark the current position before loosening the screw, you will not have to readjust it when assembling.
How was your experience with it?
It can be mounted securely, making it easy to work with Switch operation.
[Included Parts:were they on?
Yes. Matching mounting Bolt and collar are included and ready to install.
[Was there anything that disappointed you?
There is none. As expected.
▼ Requests
It would be easier to find a Brake folder if the name of the product listed is "Clutch holder...".
View detail
Fits: Others , YAMAHA SEROW250, YAMAHA TMAX500, YAMAHA RZ250R, TRIUMPH TRIDENT 660, YAMAHA MT-09, SUZUKI RF900, SUZUKI GSXS1000F, SUZUKI GSX-S750, SUZUKI GSX1100S KATANA, SUZUKI GSX-S1000, SUZUKI B-KING, SUZUKI GSX-R750, KAWASAKI zephyrχ, KAWASAKI NINJA 1000 (Z1000SX), KAWASAKI ninja250, KAWASAKI ZX-9R, KAWASAKI ZX-6R, KAWASAKI ZEPHYR400χ, KAWASAKI ZRX1200
Great product for the price
Sometimes a backpack is not enough.I use it for daily trips ..After reviewing several different tail bags, the Tanax seemed to be the perfect size.the Trails End bag attached securely and the excess length of the strap ends, tuck away cleanly. It looks well made, and I especially like the fact that the bag keeps it shape when empty.It is waterproof and the fabric is durable.Additional pockets are very functional.really great price, good and quality from many known brands.highly recommend. View detail
![Service Manual [Japanese Translation]](https://img.webike-cdn.net/catalogue/images/111384/service_manual_yamaha_TS.jpg)
It's good to have it
All Data is here.
When something is broken, something is modified, or some parts are added, it is possible to isolate from electrical drawings, tightening torque, and error codes, and to perform pass/fail tests for each part.
If you do your own maintenance, there is a LARGE difference between having it and not having it.
Service manual for YZF-R1 RN20 4C8 is very expensive but I am glad I bought it.
View detail
Smartphone Folder to be expected to be durable in the future.
I had heard that attaching a smartphone to a motorcycle would damage the camera's autofocus, so I did not install one even after purchasing a motorcycle. However, recently I have been touring more and riding on unfamiliar roads, so I decided to install a folder. It is easy to install and holds the phone firmly. The parts that are subject to force are made of aluminum parts, and the durability of the Folder itself seems to be promising. I installed it on the Left Side of the Handlebar, but since the eye movement while driving is Large, it would be safer to put it in the Center. Whether this product is really good or not depends on how long it will protect my phone. View detail
Fits: YAMAHA YZF-R25, SUZUKI Hayabusa, SUZUKI GSX-S750, SUZUKI SV650X, SUZUKI Gixxer 250, SUZUKI V-STROM250, KAWASAKI Z900RS, KAWASAKI ZX-10RR, KAWASAKI Z650, KAWASAKI Ninja250, KAWASAKI W800, YAMAHA YZF-R3, YAMAHA Tenere700, YAMAHA XSR700, YAMAHA SR400, YAMAHA TRACER900, HONDA rebel1100, HONDA VFR800F, HONDA CB1100, HONDA CRF250 RALLY
It is compact and practical.
It is small in size and easy to carry.
If you park outdoors during a long-distance tour, dew will form in the morning and the sheets will often get wet.
Especially in the spring, when pollen gets mixed in and gets messy, it can be really useful.
Lastly, since the material is thin, it is easy to fold and store. -------------------------------------------------- -------- It is small in size and easy to carry. If you park outdoors during a long-distance tour, dew will form in the morning and the sheets will often get wet. Especially in the spring, when pollen gets mixed in and gets messy, it can be really useful. Lastly, because the material is thin, it is easy to fold and store. Powered by Google Translator
View detail
Shame about the cross section.
It is lightweight and strong, only real Carbon, and the price is about the same as the price of Gold or leather shoehorns, so Material:I think this price for Carbon is also cosmetically pleasing.
On the other hand, the cut edges are not rounded and the wall is precipitous. [Color] Too bad it is not Clear painted as well.
In the product photo, it looked like it was treated roundly.
It looks like it's left uncut and looks cheap, and it's easier to use as a shoehorn if the edges of the cut surface are rounded off.
View detail
![Taffeta Motorcycle Cover with Rear Box [TYPE3]](https://img.webike-cdn.net/catalogue/images/124540/TBC-RB_1_TS.jpg)
It's cheap, so it's good.
I purchased this for a DL1000 V-STROM 800 vehicle with Rear box.
I have the impression that the sewing quality is not so good and the fabric is thin, so I am concerned about its durability, but since it is inexpensive, I will use it as if it were a consumable item.
Although it has a buckle for wind protection, it cannot be tightened until it is firmly attached to the body, so it will flap around. This is a cause of concern, as it can lead to body wounding.
View detail
![[Repair Parts] Universal Base Repair Parts](https://img.webike-cdn.net/catalogue/images/129441/31335_TS.jpg)
Those who use one Case for multiple car models.
I purchased this product to convert a GIVI Mono-lock case to another vehicle. It is easy to install and can be installed in most carriers without any modification. The price is also inexpensive, so I think it is the best choice. View detail
It's convenient to use without any problems.
The only complaint was the startup time, but this has been improved with the May 2024 Up date.
The screen is easy to read, and there are no problems operating it with the Gloves on.
Merit is more Large-like, which allows you to control Navigation and music without leaving your phone in the Bag, than the fact that you can no longer control your phone in Insta360.
View detail
250TRSide Back
The rotating mounting shaft is great for adjusting to fit the type of car, bag, and application. Even if the price is a little high, we recommend the inconspicuous black color. View detail
A must-have for Overhaul
I know the price is high since it is a new OEM product, but I would have expected more detailed instructions on how to remove and assemble it.
The essentials, tightening Torque, and limits of consumables are detailed and useful.
Is it difficult for a layman to use just the Service manual without knowledge of maintenance?
View detail
Good visibility
It is easy to see and use even during the day. It is also good that USB can be used for power supply. View detail
FirstDisplayMonitor
Installation was done by Dealer.
The hardness of the USB port, the problem of breaking if the USB port is not facing the right way, and the hardness when removing the USB port from the Slide, etc., give the impression that the product is not made with frequent connection and disconnection in mind, although it is possible to remove the USB port.
So it is basically to be used with it attached all the time. It is possible to put Wire through it to prevent theft, so I recommend using it.
I feel Merit to have a wired connection as well as a wireless connection, but you need to be careful not to lose the USB Cap!
I have not used it that much yet, but the screen is large, visibility is high, and Response is not bad.
View detail
![MONOLOCK Universal WIDE Base [MP70N]](https://img.webike-cdn.net/catalogue/images/29606/94540_01_TS.jpg)
rebuying (e.g. a loan)
Purchased the exact same one I was using before.
Previously used at E43NTL-ADV
E43NTL-ADV was removed and disposed of with it when it was disposed of.
This time, I bought a GIVI B45+, so I had to repurchase it.
The standard UniversalPlate that comes with the box rattles around.
I still feel safer with Wide.
View detail
Fits: HARLEY-DAVIDSON Universal
Used to secure Tool Bag
If you use it with a Carrier, you need to be creative when installing it because it interferes with the Carrier's legs. View detail
Quality control or packaging issues
Installation is Level, which is fine for Beginner.
No special problems with the feel of the product.
However, there is a relatively noticeable scratch on the base plate section….
Was the shipping check lax, or was the packaging messy and damaged in transit?
It's not a practical problem, but ….
The mood is lowered by the relatively expensive components.
View detail
Fits: KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, KAWASAKI W800
เคยสั่งมาแล้ว 1 คู่ แต่รถแรงเกิน ทำให้หล่นหายไป 1ข้าง เลยต้องกลับมาสั่งใหม่ เพื่อให้ครบทั้ง2ข้างเหมือนเดิม คุณภาพสินค้าดี แพคสินค้ามาดี จัดส่งรวดเร็วเหมือนเดิม ระยะเวลาจัดส่งจากต่างประเทศ ประมาณ 10-14 วัน บวก ลบ ชอบครับ ++++ View detail
Daytona spool nut
Fits perfectly! View detail