Reviews
Repair Parts is too expensive.
Purchase at the same time as the vehicle with the Option of a new car
I ordered Repair Parts the other day because I had a scratch from a standing accident.
You pick up a box of parts at the store and open it at home.
ProtectorBody was not included.
I contacted the store and they said that the included parts were correct.
The price is 15,000 and includes only silver-colored ornaments, bracket, and bolt nut.
Moreover, it is One Side.
It was a terrible experience and I am sharing it here.
Other than that, both OEM Engine Guard and Side Protector are attached.
In a standing strike, the Side Protector was grounded first and the Engine Guard was not scratched.
View detail
Repair Parts' pricing is bad.
Purchase at the same time as the vehicle with the Option of a new car
I ordered Repair Parts the other day because I had a scratch from a standing accident.
One Side with 15,000. That's expensive." I thought that Y's Gear products would be safe, so I bought it.
You pick up a box of parts at the store and open it at home.
Included was a Silver colored decorative Cover, flat Bracket, Bolt, and Color!
ProtectorBody was not included.
Huh?" I asked the store about it, but they said that the included parts were correct.
Please be careful.
This product looks good, but its Repair Parts are a rip-off, as if to undercut people who have had accidents.
The price is 15,000 and includes only Silver colored ornaments and Bracket.
Moreover, it is One Side.
It was a terrible experience that made me so angry that I felt I would never buy Y's Gear products again, so I will share it here.
Other than that, both OEM Engine Guard and Side Protector are attached.
In a standing strike, the Side Protector was grounded first and the Engine Guard was not scratched.
View detail
Fits: HONDA CB400SF VTEC, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR REVO, HONDA CB400SF VTEC REVO
Mounted on NC39
I am satisfied with the OEM color, so there is no sense of discomfort after installation.
Since the paint can be scratched off by stepping stones while driving, it is a good idea to put a protection film or the like on the front end of the car so that you can go touring with peace of mind.
View detail
_TS.jpg)
Recommendation for those who want Rear under cowl on GSX-8S,8R
Although it is an overseas product, the precision and quality are high, as if it were a manufacturer of for-race parts.
The GSX-8S and 8R have only a thin rubber plate as a partition between the tire and the rear suspension, so if you are concerned about splashing mud on rainy days or dirt on the rear suspension, this is a recommendation.
The shape is also cool, with an accent near the center, and the Matte Black color gives a sense of uniformity, as if it had originally come from the OEM.
View detail
Circuit support
I bought it to run Circuit with MOTARD.
Gasoline spillage can be prevented in the event of a fall.
The aluminum bubbles are anodized and well designed.
View detail
Grip is good
Grip is good and can be held properly.
Double-sided tape does not have a bad bite, but the resin part tends to peel off easily due to temperature changes, etc., even if the tape is degreased properly.:When applying to Unpainted resin, it is better to use strong Double-sided Tape for Vehicleetc.
The Cut surface is standing up and may catch on the seams of the Pants. I used Cutter to cut off the corners.
View detail
Fits: GASGAS 515 EC 09, GASGAS 515 SM 09, GASGAS 450 SM FSE 09, GASGAS 450 SM 09, GASGAS 400 SM FSE 03/04, GASGAS 400 EC FSE 02, GASGAS 450 EC FSE 03-11, GASGAS 300 EC 00, GASGAS 250MC 02, GASGAS 250 ENDURO 01-04, GASGAS 250EC ENDURO 97-00, SUZUKI DJEBEL250, SUZUKI DJEBEL250 XC, SUZUKI COBRA, SUZUKI WOLF250, SUZUKI RGV250 (Gamma), SUZUKI DR-Z400S, SUZUKI DR250S, SUZUKI DR350, SUZUKI DR350
FinalLong adjustment
I installed it on HUSQVARNA's 2014 SM250R and had to adjust it to Long with Rear Sprocket only due to difficulty in sourcing anything other than Number of teeth on the OEM for this year.
There is a lineup for up to 40 guns in a separate BRAN, but the lineup for 39 guns and below was only in XAM.
I purchased and installed it to drive on the SUGOCircuit and was able to reach a maximum speed of about 160 km/h without overrevving.
View detail
Fits: YAMAHA XSR900, YAMAHA MT-09 SP, YAMAHA MT-09
Dissatisfied
I purchased this product to prevent Small scratches.
It floats from the edges, either because the size is not right or the adhesion is weak.
After pasting, Meter was difficult to see.
After a few Touring, I felt that Small scratches were better and removed them.
View detail
The classic European Blinker
This is a replacement for an OEM Blinker. I am satisfied with the stylish look. View detail
It's hard to take off even though they're on
They do not have side zippers like regular lighting boots, but rather a tubular opening. In my case, I had a hard time taking them off after putting them on. View detail
(too) early
It is normal because it is a replacement part.
The response was fast and helpful.
View detail
Price is high but desire to own is satisfied
If you ignore the price, it's great.
However, the Risk of theft is now clearly higher when you are out and about etc.
5,900 yen for a mere ArmParts
Texture is the best
It also satisfies the desire for ownership.
Anyway, it's expensive.
I'm ordering from Manufacturer, but I don't mind if it's sold separately, so I can get a Screw with anti-theft measures later.
I wish they would release it.
I changed to Screw Tightening with Hexagonal Wrench
View detail
Quality is top notch
If you ignore the price, I don't think you can find a better quality ClampBase than this one.
It satisfies my desire to own one.
View detail
Eliminates string flapping
I bought this bag because when I bought and installed the MOTO FIZZ MP-295 Seat Bag, I had a lot of extra belt and it was inevitable that it would flop around while driving. I thought that the size of the Option product from the Manufacturer was more suitable for my needs.
As a result, I have no regrets and use it comfortably.
View detail
Reliable Filter
I bought it two years ago and this is the second time. It was not badly stained,
Replaced to prevent carburetor clogging.
It has magnets on it so it will remove rust, etc.
View detail
Difficulty in operating the phone.
As for summer Gloves,
It is well ventilated and there are no problems.
The operation of the phone is,
The thumb responds occasionally, but it was difficult to operate correctly. For comparison, the RSThailand Chi Gloves.
View detail
Buying on webik is not a good idea.
It tore easily, or rather frayed from the seam. Webig has a 30 day return policy, so I cried myself to sleep. You should definitely buy from Amazon. I wanted to buy from Amazon in the first place, but they didn't have the size, so I had no choice but to buy from WeBig. I was wrong...DAYTONA Gloves suck too much. View detail
Good texture
I locked the Saddle Bag and tried to put the Wire through the Belt on the Back Support, but the loop of the Wire was too thick and did not go through. However, I have no complaints because a thin wire would make the security weaker. I just bought it, so I don't know how durable it is, so I give it 3 stars. View detail
Fits: Others Universal, HONDA CB1300 SUPER FOUR, HONDA CB1300 SUPER BOLDOR, HONDA HAWK11, HONDA CB1100EX, HONDA CB1100RS, HONDA REBEL1100, HONDA CBR1000RR-R FIREBLADE, HONDA CB650R, HONDA CB1000R, HONDA VFR800F, HONDA CBR650R, HONDA CB1000 SUPER FOUR, HONDA CBR900RR, HONDA X11, HONDA VFR, HONDA X4, HONDA CBR1000RR, HONDA CBR600F, HONDA VRX
It is a regular replacement.
I have been using it for almost 2 years now and it is starting to get holes in places, so I decided to replace it. I always buy cheap ones, but this time I chose Black. I am glad that it is not noticeable at night. I wonder if the color will change after another 2 years or so due to tanning. I used black once before, but the color of the black one changed considerably due to tanning, so I will see how it goes this time. The cheap ones are good enough to use. I have used Black once before, but the color of the Black one changed a lot after tanning, so we will see how it goes this time. View detail
![[Repair and Optional Parts] Tear-Offs for ARMEGA Goggles](https://img.webike-cdn.net/catalogue/images/102307/0000000009552_KNv4vD0_TS.jpg)
For Lens Protection
I purchased this lens for the primary purpose of protecting the Mirror Lens rather than to ensure visibility.
Without the Tear-off Film, the Mirror Lens gets scratched easily, and since the Lens is an expensive model called Al Mega, I wanted to use it as Large as possible.
The number of sheets is large, so it can be used without hesitation.
View detail