Reviews
Excellent visibility
This one is used for CRF250RLY50 MOTARDSpec.MD44 and my car Swift Sports31s
It is inexpensive, highly visible, and the cap is easy to remove, so it is great for Small students who check their air pressure frequently.
My only regret is that when I purchased this item from Webig, it was somehow shipped as a Single Item, even though I requested that it be combined with an order that was waiting for another item to arrive.
I was very irritated that I had to pay a ridiculous shipping fee for an item that cost less than 100 yen.
View detail
Fits: YAMAHA XG250 TRICKER
Tire that does not decrease.
[How is it used?
The XG250 TRICKER tires we purchased used had cracks on the surface due to age-related deterioration, so we decided to purchase this product to replace the tires.
The cost of a tire is much cheaper than the expensive repair cost of a slippery tire that falls over.
I feel a sense of security as if it were my parents' home since I have been using this Tire for many years in my Dual PurPass car in the past.
How did you like it?
This is a tire that can be driven happily on everything from city streets to winding and flat forest roads.
It is not a heavy tire like the Block tie ya, so it is not easy to ride on muddy surfaces or on hard attack roads (depends on the rider's skill?). However, it is rather fun to ride on a little forest road if you understand that the limit point is low at the beginning of the slide.
Personally, I really enjoy winding, and with 4st single cylinder power of around 20hp, it is hard to break down (except on low μroads) and can be driven with full throttle fun, just like Radial's high grip tires. Grip feels like it sticks to the road surface." However, if the rider is conscious of the weight transfer, the tire has a good ground contact feeling, and even at the limit, it does not suddenly start to slide with a "Span!
And it doesn't decrease.
The rear side also lasts longer, but the front tire wears even less, so unless you ride frequently to work, the tires will last so long that they will harden first.
[Points to note]
From Manufacturer Precautions for use." As mentioned in the previous section, unexpected use will increase the risk, especially at the beginning of the cold season.
How did it compare to other products?
Tires of the same etc. are sold by Bridgestone and Dunlop in Japan, but both products are not as good as the Large Kina Difference There is no
One of the Merit of this Tire is Low prices." Webike's Tire is often offered at more Reasonable prices than the above-mentioned Manufacturer's Tire (except when the above-mentioned Manufacturer is on Sale), so it is always easy to get your hands on it.
Other items that would be helpful
Point and hang of installation
DIYers can use the detachable Tube bite." Please work with great care to ensure that the
If you are anxious about the work for the first time, please check the procedure carefully in the video Site before attempting the work.
If you lose confidence after watching the video, rely on PRO or a friend who is familiar with the work, "I drilled too many holes in Tube, and as a result, it would have been cheaper to hire a PRO..." This is often the case, so please think carefully and choose the best method.
[ITEMS TO BUY TOGETHER
If you don't have all the tools. Tire Lever BEETWax." Rim Guard. etc., so the work will proceed Smoothly, and the Tube should also be replaced with a new one.
In addition, an air compressor will make the work easier.
[Opinions and requests to Manufacturer
forever and ever A friend to the common man." Please maintain the pricing that you have established.
View detail
Very good.
TE250 2024
Used with JX8 air pressure 0.3.
It is easy to apply traction and very good.
View detail
Good quality, good price
Old rim lock disintegrated and needed a new one. This is almost identical to stock and fit exactly as it should.DRC rim lock is as good as any other rim lock. It weighed considerably less than what I was expecting.I always choice zeta, really quality parts and the best price Easy install but make sure you balance you wheels. View detail
Anyway, it was hard.
The CT125 Rear tire GP-5 has 2,0mm left, so I'll change it after a few more runs, but I'm running a GWCampaign, so I'll buy the Tire while I can, and I'm in the On 9, Dirt 1 ratio here, so not completely On road, I decided to go Adventure oriented.
So, after much deliberation with the well-reputed Anakee STREET, I decided to go with D604, which has no Reviews at all, as I am a minority, and write my first Review.
In a review by a certain Large River in South Brazil, the only negative image was that it was hard and vibrated.
After touching the one that arrived at my house for a bit, I was prepared that it would be hard and tiring, as it reminded me of the T63 thing from company M.
Now, when I got it in my hands with the usual Pattern, I already wanted to replace it, and I had planned to replace it next month, but I started to do so (laughs).
As you might expect, there is a direction of rotation for installation, so we carefully checked the direction of rotation before starting work.
This is my first time to replace Tire on CUB, but I will follow the theory here.
The GP-5 has a soft bead and was relatively easy to remove.
Now, let's start the assembly.
As usual, apply a generous amount of Bead wax.
Unlike off-road vehicles, we do not want to scratch the rim, so we use rim protector while working.
It's already hard even to fit the first time!
Fit the One Side and put in the Tube. These are not so fiddly.
Turn it over and put the other side in, but it is hard anyway!
After fitting half of the wheel, I held it down with my foot and lever it in, but the remaining 20cm or so was tough!
The installation was done carefully, boldly, and by brute force.
We managed to complete the work without any holes in the tube and with a clean rim.
I ran the car for a while, and it is true that the slight vibration from the Rear has increased, but it is not at a Level that bothers me that much.
Grip is often seen as such and such, but well, it is a CUB, so it can run and stop normally.
We don't ride in the rain, so as long as the dry grip is good, it's fine!
The groove is somewhat larger than GP-5, and the block is also larger, but the tread surface and SIDE are harder, so I think it is easy to be played on the dirt.
Muddy terrain is likely to Stack if not driven well, but the CUB does not have that kind of driving ability to begin with.
If you are used to working on CUBs with Spoke wheels, and if you are used to working on them, and if you drive in an adventurous manner, recommendation.
I thought that GP-5 would be easier to work with when Puncture was done, and that in the end the standard Tire would be the best. I thought that the standard Tire would be the best in the end.
View detail
DUNLOP Dunlop Rim Band [17in.
The one that was installed when the car was delivered was replaced for the first time.
If the Rim Band is damaged, it can lead to puncture, and since it is not expensive, it seems to me that it should be replaced every time the Tire is replaced.
View detail
Without this guy, the air….
With this, you can easily inflate the air at the service station!
It is very useful because without it, the Inflator's large size can be unexpectedly strange!
Attach to CUB!
View detail
Used for Tire Replacement
Anyway, it's cheap!
I recommend it because it is a price that makes Tire replacement easy!
It's properly three for the price!
I am going to try to replace the Tire on the CUB110.
View detail
Cheap! Cheap anyway!
Anyway, it's cheap!
It is the cheapest Rim Band and fulfills the functions!
When replacing the Tube, the price is low and the replacement is safe!
View detail
Just the Right Quantity for Tire Replacement:Set
[How is it used?
I purchased this product to replace a SUZUKI/CHOINORI Tire.
This is the first time for me to exchange Tire by myself.:Set.
Was the one you received as per Image?
It was just as Image.
This Quantity:In addition to the Set, Air Valve Puller and Tire wax were additionally purchased.
How was your experience with it?
It was my first time to replace the tires.:Thanks to Set, we were able to successfully replace the Tire.
Lever was also Simple and easy to use, but Quantity:2 pcs is a little short, so I wanted to get another Lever with an irregular shape.
[Points to note]
I was careful not to damage the rim with the lever when replacing the tire.
How did it compare to other products?
There was also a Tire Lever from another manufacturer, but I thought this product would be sufficient since the frequency of tire replacement is not that frequent.
View detail
Replaced with Tire Replacement
Used on front and rear Tire of ADDRESSV125GLIMITED.
In particular, Front tire is now at L because NORMAL is Straight, and Inflator is easier to use.
View detail
Fits: YAMAHA Spark R, YAMAHA Spark 135, YAMAHA RZ50, SUZUKI WOLF50, SUZUKI RG50γ, SUZUKI RAIDER R150, HONDA SUPERDREAM110, HONDA SUPER CUBC125, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA WAVE125, HONDA CT125 CT110 HUNTER CUB, HONDA WAVE110, HONDA CBR150R, HONDA CBR125
Introduced this time with the understanding that it is Overspecifications (Rear ed.)
[Exchange history].
The SUPER CUB110 is 10 years old, but the mileage is less than 5000 km, and of course the tires had never been replaced yet, so this was the first time to do so.
I have only ridden sports type motorbikes, so I don't rely on tires for business motorcycles, and I know they are overspecifications, but I chose Bias' strongest tires for this project.
Rear is also implementing Chain exchange at the same time this time.
Comparison with the condition of increased weight and resistance since the Chain was replaced from Chain without Seal to Chain with Seal.
Cautions for exchange
I had prepared to replace the 10 year old Tube just in case it needed to be replaced, but did not use it this time.
The hand-assembled Image is a Tire that is slightly stiff on the side wall and very soft on the ground surface.
Bead seems to rise easily even without much air pressure, giving the impression of softness overall.
FirstImpression
The weight of the Tire has been increased, and the weight of the push/pull feels larger, but on the other hand, it feels lighter once it is pushed out, or perhaps it is a sense of resistance. Is it inertia?
I am afraid of a situation where the Rear brake tends to lock up in a Rear brake-centered CUB because it causes the braking distance to increase, but to be honest, that has not changed.
However, since the grippy feeling is transmitted firmly, it is easier to clearly detect when braking from high speeds that the car is about to lock.
The Rear also has a pointed Profile that makes it light to lay down and easy to maintain posture during banking.
The OEMTire was not stable in the lying position, on the contrary, it would have been light and easy to handle at low speeds, but the Q-Lite is of course outstandingly stable when the pace is increased.
Life seems to be short, but I don't drive that many miles to begin with, so again, the time for replacement is likely to come in years.
View detail
Fit to Rim
Fit feeling to the rim is also good. It can be tightened.
I happened to find this product and bought it.
I think it was good.
Installation is no problem, just insert the Bolt when fitting it.
I hope it works for mud intrusion and such.
It looks beautiful and I recommend it.
View detail
D Tracker 125 rear tire replacement
I purchased this tire to replace the rear tire on my D Tracker 125. I always buy this tire because it is a special tire for D Tracker 125, and when I replace the tire, I also replace the Rim Band and Tube. I purchased the Tire, Tube, and Rim Band at the same time for the lowest price from Webig. (Free shipping too). View detail
D Rear tire replacement D for Tracker 125
I purchased the Rim Band and Tube at the same time to replace the rear tire on my D Tracker 125. Since I do the Tire replacement myself, I only have to pay Gold for the parts. I bought it from WeBig because they had the best price! 。 Discarded Tires are picked up at Motorcycle Parts stores for a fee. View detail
D Tracker 125 rear tire replacement
I purchased these tires and tubes for my D Tracker 125 when the time came to replace the rear tires. I don't know how durable they are, but when I replace the tires, I always replace the rim band and tube as well. I bought it because Webig's price was the cheapest for replacing them all together. I am replacing the tires myself, so it will be cheaper. View detail
Flexible and good
Used to replace front and rear Aluminum WheelTires on Addressv125g.
It is flexible, yet just the right thickness and large enough to replace the rim without damaging it.
The rim protector with a string attached that I bought from a certain NetShop broke after one use while installing a Brand New Tire, the string attachment part broke and fell inside the Tire, and I had to take the Tire off and on once more.
This product does not have such concerns.
Durability remains to be seen.
View detail
IRC MB10 3.50-6Tire Stable 6-inches Tire
I have been using this tire since I built my 6InchMONKEY about 20+ years ago. This time I replaced the Rear tire because of SlipSign. My 6InchMONKEY started with a 75cc Bore up, then 85cc, and now it is running on a Chinese 86cc engine. I don't feel any particular problem with the grip and rain performance. I feel that the grips are rather good, and due to the size, the wear is a little faster than the 8Inch, or maybe at the same etc. level. However, since it is lighter in weight, straight line stability tends to deteriorate a little. It is a little hard on the hips when touring more than 100 km one way. Above all, I just want to thank you for continuing to make this product and providing stable performance. Please keep up the good work. View detail
It can be used with confidence
I used it for my MONKEY.
Tubeless tires are installed by modifying KITACO's matching wheels. I wanted to use Straight Type, but it was difficult to inject air into the wheel due to the space.
Of course, there are no air leaks.
To install, instead of forcibly pushing it into place with a screwdriver, spray it with silicon spray, insert the HEXWrench into the hole on the reverse side of the rubber, and push it into place easily without damaging the rubber.
View detail
Thin Socket required
Used on Ninja ZX-25R.
In addition to replacing the Tire by hand, we replaced the Valve with an L-shaped Valve.
It may be just Kawasaki, but the installation is tough.
The hole diameter for the Valve of OEMWheel is too narrow to use the Socket of normal Tool.
I tighten a 14mm nut, but the wheel hole diameter is probably less than 19mm and the socket will not fit.
I measured the outer diameter of the Socket and it is about 20mm.
It is impossible to tighten without using a thin 14mm Socket with an outside diameter of 19mm or less.
I had no choice but to lightly fix the Nut with Spanner without turning the Nut and turn the L-shaped ValveBody to tighten it.
When tightening, a thin layer of silicon grease must be applied to the rubber portion of the valve, otherwise the rubber will be twisted and deformed.
Note that if the Rubber is twisted and deformed, it can cause air leaks.
I was forced to prepare a small socket with an outer diameter for the next work, so I looked around on the Net for a lot of things.
I had no choice but to purchase a 14mm plug socket with an outer diameter of 18mm because there are no normal thin sockets available.
View detail