Reviews
No problem, no problem, no problem
There is no wobble and no problem. View detail
Classic color and cool!
I installed it on my JA07SUPER CUB and it looks great with the classic color! And the Yellow Bulb is easy to see even in the rain! I like the durability and the fact that it doesn't break easily! I am very pleased with the durability of the bulb and the fact that it doesn't get damaged easily! View detail
Racer is the face of TRAIL
I purchased the Racer to make it a public road Spec.
To secure it in place, it is fastened to the front fork using the included band. The overall texture is good, and the wiring and detailing are sufficient.
If I had to say so, I would have preferred not to put the Poly sports sticker on the Number Plate side. If it is attached separately, I can put it wherever I want.
View detail
USB Socket plugged in...
I think the slide style cap is great in terms of both gimmick and operation. However, since the SocketBody and the middle box are of a certain size, I could not pass through the small space around the Handlebar to hide the Wiring, and I had no desire to make it all Rose, so I ended up compromising. In this respect, it might be better to have an intermediate connector like other manufacturers, but it might cause contact failure, so it is a win-win situation.
The included parts are sufficient for most motorcycles, but a plain type terminal would have been a nice addition.
Test after installation is completed (using Anker USB Cable) After repeated unplugging and plugging several times, we were able to confirm that the device was energized. There was a feeling of being stuck until the device was energized, so there may have been something wrong with the molding of the USB Socket.
In any case, we are satisfied that the system is currently fully operational.
View detail
Fits: HONDA SUPER CUB 50Standard, HONDA SUPER CUB110, HONDA SUPER CUB110Standard
Easy installation for everyone
The point that anyone can easily install is good. However, when removing the body of the SUPER CUB, the part that comes in contact with the SUPER CUB is
If you cure with tape in advance, you can avoid putting wounds on the surface.
View detail
6Vfor VehicleHorn with few options
YamahaCHAPPY (CHAPPY) I purchased this one because the Horn of
I preferred the look of the long-hole Type instead of the round hole, but I bought this one because it was in stock and I could work on it right away.
It is easy to remove and replace the Horn that was previously attached when it arrived.
The OEM had two bolt fasteners, but since they could not be installed horizontally, they were fixed vertically with a single bolt.
No special Bracket modification or Wiring extension was required.
After installation, I tried playing Horn and it sounded fine.
The voltage is not very stable at 6V and the sound varies depending on the engine speed, so the sound quality cannot be evaluated in any way. (Lol)
"Pi" rather than Bee." It sounds like "I'm not sure.
It's not something I would ever use, but I'm glad I was able to get it to work in case of an emergency.
View detail
Horn.
I purchased the Racer to make it a public road Spec.
Quantity of electrical components:I could have bought it as a Set, but I bought this one because I can reconfigure it in various ways.
If you energize it and turn on the Switch, you can use it normally.
The volume is also sufficient.
View detail
Relief
I bought it because it was inexpensive. It is a good product and easy to read for a small size. View detail
Should be originally equipped with OEM
It is a must have item for a beginner of Rotary Mission. I used Seiran Kobo's Meter Holder for the Handlebar Post because it is too far away from the Meter and not very visible. The instruction manual is easy to understand with color photos. Sometimes when I put it in first gear... "0" Neutral on the Meter side disappears, so I judge it by that. View detail
cracked glass
I purchased the Racer to make it a public road Spec.
We were looking for something not too expensive, but not too fragile and with good performance for off-road use.
I bought this one because Lens is resistant to cracking, and it looks pretty good.
The size is small so as not to spoil the silhouette of the car body, and above all, at this low price, even if the Lens is broken, there will be no damage.
View detail
![Tail Lamp Hologated (Rear Light & Stop Light)[HOMOLOGATED TAIL LIGHTS(rear light+stop light)]](https://img.webike-cdn.net/catalogue/images/13445/8569500001_TS.jpg)
Fits: Others
Space under Light is ….
I purchased the Racer to make it a public road Spec.
Quantity of electrical components:I could have bought it as a Set, but I bought this one because I can reconfigure it in various ways.
A License Plate is attached under this plate, but the area seems to be a little narrower. Perhaps it is the difference in shape between the Japanese number and the European number.
The performance of the Light itself is fine and bright enough.
Also, the size is more compact than expected.
View detail
bright
I think it is more crisp and clear than OEM. View detail
I was able to replace it by simply popping it in.
I replaced the Low beamValve and the light spread and brightness are fine.
The built-in fan is barely audible.
I don't know about durability yet, but I expect it will last a long time if it can survive the summer first.
View detail
Double Bulb included is a nice touch.
The OEM stop-lamp ran out, so I replaced it with this Smoke Type product as a change of pace. It looks better than it does in the picture. [Color] Smoke feel." The "M" is a little bit smaller than the "L" and does not look bad even if an old man rides on it! View detail
It is quite convenient to have it in Single Body.
I purchased the Racer to make it a public road Spec.
Quantity of electrical components:I could have bought it as a Set, but I bought this one because I can reconfigure it in various ways.
This will bring together the electrical system for the time being.
The terminal connections are in good condition and are securely fastened with Heat Shrink Tubes, so they appear to be water resistant.
View detail
Fits: HONDA Dio (DIO), HONDA Dio cesta (DIO CHESTA), HONDA Dio SR (DIO), HONDA Dio ZX (DIO), HONDA Dio ZX (DIO)
This is usable!
My father's LIVEDio was stolen and the key hole was destroyed while he was parked on his bike, so I installed this product. It works fine, and he is happy because the old key is now new and easy to turn! View detail
For retrofitting electrical systems
I purchased the Racer to make it a public road Spec.
Quantity of electrical components:I could have bought it as a Set, but I bought this one because I can reconfigure it in various ways.
It was a little bit difficult to wire the unit because it was installed from scratch in a vehicle with no safety components. 6V MONKEY/GORILLA Main Harness is connected to the main harness, which switches the supply from the power source on and off.
View detail
Large capacity
[How is it used?
Bullet Type Terminals are required for USB power supply and other wiring processes, but of course Bullet Type Terminals are used up.
Quantity:I bought a set of 30pcs. or something like that, but I found that I had no Bullet Type Terminal on hand and had to stop working on it, so I bought Quantity:1 Set of 100pcs.
How was your experience with it?
It is an ordinary Bullet Type Terminal made by Emon, which can be easily obtained at Home center.
100pcsQuantity:Set is not readily available around there, so I purchased it on Webike.
How did it compare to other products?
No specific comparisons were made.
[Points to note]
Sleeve for waterproof is not included, so you need to prepare it separately if necessary.
【Review】
The Large capacity is recommended for those who do a fair amount of DIY Wiring work.
It is better to store them in a 100x box because they may be lost if left in the bag.
View detail
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, HONDA CRM80, HONDA XR230, HONDA CRF230F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW250, YAMAHA XG250 TRICKER, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRM50, HONDA CRF250M
I'm not sure about the electrical system, but ….
I purchased the Racer to make it a public road Spec.
Quantity of electrical components:I could have bought it as a Set, but I bought this one because I can reconfigure it in various ways.
These are the Parts that are required when using LEDs with DRC's Kit.
View detail
An accessory should be mounted on the vehicle
With 125cc models produced by Hona in recent years. The vehicle's display clock often does not show engine rpm or battery voltage. These two things lead to disadvantages when using a motorbike, especially the voltage problem when the battery is weak, we cannot monitor the exact voltage index at that time. With this OPMID meter, the above disadvantages are resolved, the meter clearly displays rpm as well as the current voltage of the battery. The special thing about OPMID compared to other watches is that it has a touch screen that can interact very sensitively. From there, it makes adjusting parameters much easier and faster. View detail