Reviews
Black
Since the bracket is black, I bought it to unify the Fixing Screws with black as well.
Black is good in rust-resistant Stainless Steel, but not cosmetic in terms of the price of two pieces for sale.
View detail
If it fits with Screwhead.
The OEM RubberWasher of MRAScreen was cracked, so we replaced it with an aluminum one that looks and does not crack. I could not tell that it was BlueAnodized. View detail
attachment
I tried to replace it with a new one when I installed ChamberBand and Rubber cushion, but because I installed Rubber cushion, the band part was too tight and it was too large to tighten the bolt, so I gave up on Spring installation. I thought I didn't have to worry about loosening even if I didn't install it.
It is an ordinary Spring seat. The price is not that high.
View detail
Spring
The bolt related parts were replaced with new ones in conjunction with the installation of the chamber band and rubber cushion.
The band was too tight, probably due to the rubber cushion, and we gave up on the Spring installation.
It is an ordinary Spring seat. The price is not that high.
View detail
attachment
When the band and rubber cushion are installed in the chamber section, they are replaced together with the bolt replacement.
It is an ordinary flat seat.
View detail
Exchange together
Rubber cushion is attached to the chamber section and replaced together with bolt replacement.
It is an ordinary flat seat.
View detail
World's Strongest Loosening Washer
I bought this one after mistakenly buying a Nut with a locking nut without a locking nut, and was thinking of replacing it with a Spring Seat Gold or Nylon locking nut, but they deteriorate and can only be reused about 5 times. I was thinking of replacing them with Gold or Nylon type Nut, but they deteriorate and can be reused only about 5 times. I tried it because it seems to be reusable.
Nord-lock washer:The world's first friction-independent, non-loosening product is the non-loosening Washer developed by Nord-Lock."
The "WedgeLocking effect" caused by Cam makes it physically impossible for Bolt to spontaneously return and rotate to loosen. according to what someone said Physically impossible." That's a great thing, isn't it?
Check the bolt length and clearance something.
Run it and it doesn't loose at all. It's awesome.
View detail
V125 K5 Fork Bottom Bolt Gasket as
V125 K5 Fork Bottom Bolt Gasket as
Cheaper than buying OEM Product
View detail
I wanted something thin.
I purchased these for the Rear Fender and to absorb vibration of the car body.
I put it on an area where there would be a lot of vibration, and it feels better to have it than not to have it.
I like that it's not too thick and not too wild.
View detail
For Screen Fixation
I was wondering if it could be used to fix the Screen? I was wondering if it could be used to fix the screen, and since the price was reasonable, I decided to purchase it.
The thickness did not seem to be long enough to be subtle,
Length difference eachQuantity:It is nice that the selling price is not that much for 5pcs., with Washer.
It will be used in other fixed components.
View detail
Fits: Others 35mm diameter for Front Fork
Used for NSR50 front fork
There was an old fashioned method of putting a 10-yen coin in the front fork to harden the spring of the front fork, but instead of that, I put this in.
I wasn't sure if the damping was stiffer or not from a tactile point of view, so I feel that two or three cards should be included.
View detail
Real Carbon's pattern is beautiful.
I used this when installing TSR's Radiator guard on my CB1300SF.
Since we chose black color Radiator guard, the OEM screws (silver) looked floating, so we combined black dyed Button bolt and CarbonWasher. The black-dyed button bolt has a small diameter, so we tightened it with the CarbonWasher.
I am satisfied with the high quality of Carbon.
View detail
Fits: KAWASAKI Z1000 MkII, KAWASAKI Z750FX
Now you're safe.
Exactly. mk2 was in this
I bought a lock washer for z1-z1000 a while ago and it was a failure, so this is a relief!
View detail
Expensive but worth it!
[How is it used?
OEM Washer Rustetc. Rustproof Material as Repair Parts as it deteriorates over time.:I changed it to Stainless Steel.
Was the one you received as per Image?
High Quality and Rust-Free!
Was the installation difficult?
It is easy to replace an old Washer.
How was your experience with it?
You can use it without worrying about Rust as well as Nut.
[Included Parts:were they on?
Nothing else is attached as shown in the image.
[Was there anything that disappointed you?
Expensive is a regrettable Point in Neck.
I am not sure if they are not sold in Single Item, but I have a mid-Quantity:It is subtle that you have purchased 1 Set of 3pcs.
View detail
Purchased to replace Oil
[How is it used?
Bought this to replace oil on my PCX125, used it between drain bolts to seal them.
How was your experience with it?
It was Exactly 12mm! It was a size larger than the Washer that was originally used, but it worked fine. I don't know about durability, but I don't need to buy more for the time being since there are several in the package.
I will make sure to change it every time when I change Oil.
How did it compare to other products?
[Points to note]
It comes in a lot, so if you think you don't need that much, you may prefer other products. However, it is a consumable product, so I don't think it would be a problem to have a lot of it.
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
For places where you don't want to stand out.
This is the best choice for a washer in an inconspicuous location.
It is inexpensive and safe to use.
View detail
It came with your new Banjo. (Lol)
It came with the new banjo bolt, but will be a spare. View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750 (air-cooled), KAWASAKI Z900 (KZ900), KAWASAKI Z1000 (air-cooled)
Essentials when replacing Sprocket
I use it all the time when replacing ChainSprocket.
I tighten the DriveSprocket with pure STD nut without using lock nut, but if you use this lock washer and bend it neatly, the nut will not come off or loosen so easily.
Naturally, each time the Sprocket is replaced, the lock washer is also replaced with a new one.
View detail
Oil Check Bolt Sealing Washer for the Monkey 125
About quality and texture: I am happy with the quality of the oil check bolt sealing washer from K-Pit, the washer is made from copper and for the M6 sized bolt that are used for blocking the oiler port for the tensioner push rod. About the feeling of use: The OEM Honda sealing washer had been reused a few times and now had a minor leak, the replacement sealing washer is a perfect fit into the port on the left crankcase cover. Products to buy together: The 14mm sealing washer fort the tensioner push rod bolt would also be desirable to purchase along side the oil check bolt sealing washer to ensure zero oil leaks after performing maintenance on the cam chain tensioner system. Difficulty of installation: The process to install takes about 5 minutes, make sure oil is in the tensioner push rod oiler port before installing the sealing washer and torquing down the bolt. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting a quality part from K-Pit that was in stock and ready to ship unlike the Honda sealing washer but the K-Pit sealing washer is slightly more expensive. About shipping and packaging: Sea frieght was my preferred method of shipping due to the lower cost but currently this service is unavailable from Japan Post, EMS is much faster which is nice. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: View the Kitaco engine tuning and maintenance parts catalog to see what other maintenance parts K-Pit have to fit the Grom and the Monkey 125. View detail
Mounted on a Brembo oiler
Because the rubber mat I bought elsewhere was too thick to fit on the oil pot, I bought this rubber mat, which is relatively thinner. It is just right to install on Brembo's large oil pot. It is used with the galespeed oil pot bracket. One thing is that the metal gasket is a bit thick and cannot be fully screwed in place when screwing the bolts. -------------------------------------------------- -------- Because the rubber pads I bought elsewhere were too thick and installed on the oil pot, I bought this rubber pad, which is thinner than it. Installed on the big oil pot of Blabo, it is just right .It is used with the GALESPEED oil pot bracket. One thing is that the metal pad is a bit thick. It cannot be completely screwed in place when the bolt is twisted. Powered by Google Translator View detail