Reviews
Casually add Accent to Wheel
Since the wheel color was originally Bronze, the area around the tires and wheels looked rather plain. We also had a hard time choosing a color for the rim stripe that would go well with the Bronze color. As a result, we applied Mirror Bracket's exclusive type of Silver, and it became an image like the shine of cutting rather than the accent of the color, accent of the genus Gold or Plating. It is not flashy, but I like it because it adds accent like a large person.
Paste is a dedicated Gauge, Squeegee, and soapy water (Mist spray) Anyone can apply it beautifully if they have it.
View detail
easy to stick to
The front and rear set of 18-21inchQuantity is a great deal for hiding the wound of the rim and for dress-up.:I bought the set
I degreased the parts with Parts Cleaner according to the Instruction Manual, and started applying the parts with diluted detergent water.
However, it floated right away, so I wiped it off with Tissue and applied it dry, using the Sticking Gauge that I had purchased and prepared at the same time.
The result was easier to work with and better looking.
The Sticker itself is easy to apply both in terms of firmness and thickness, so all that remains is durability.
View detail
Vulgarly gaudy
First of all, it is expensive.
Combined with the color of the Wheel, it became vulgarly gaudy. Also, the Rim was pear-shaped and peeled right off.
Adhesion appears to be weak.
View detail
No need.
Bend the product to make it look like a Rim, but use it as such.
I didn't feel the need to do so.
The point is, if you can make a nice circular shape, you can do it by hand.
I used the circular marks in Rim as a guide when pasting.
I was able to apply it by hand.
It might be useful to have such a landmark, since it should not exist in normal Rim.
However, it is a product of Level that may.
There are two types, one for 4 and 6mm and one for 10mm, so be careful when purchasing.
If you don't like to put it on, it's not expensive and you should buy it.
View detail
Yoshimura rim sticker
No doubt that the Yoshimura rims stickers can make your bike in sharp and stylish. I have been trying to make more Yoshimura products to improve my bikes on performance then , not only for good looking. View detail
It is GOOD if you apply it while pulling.
[How is it used?
I'm running Enduro on my Motocrosser, and I got a Wheel for Enduro, so I put this product on it.
Normally I would use Rim tape, but due to the way I change my tires, Tape is more convenient for me, so I chose this one.
Was the one you received as per Image?
As per Image
Was the installation difficult?
Just put it on after degreasing with Parts cleaner etc. firmly.
How was your experience with it?
When I change the tire, I put in the tube with the bead stopper after putting in only one side of the tire, and put in the other side of the tire. I don't have to worry about Rim Band anymore.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
If it's winter, I think you can stick it more strongly if you warm it up a little in front of the Stove.
View detail
easy to stick to
[How is it used?
I got a Wheel for Enduro, so I attached this product to it.
Normally I would use Rim tape, but due to the way I change my tires, Tape is more convenient for me, so I chose this one.
Was the one you received as per Image?
As per Image
Was the installation difficult?
Just put it on after degreasing with Parts cleaner etc. firmly.
How was your experience with it?
When I change the tire, I put in the tube with the bead stopper after putting in only one side of the tire, and put in the other side of the tire. I don't have to worry about Rim Band anymore.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
If it's winter, I think you can stick it more strongly if you warm it up a little in front of the Stove.
View detail
The important thing is the last Dryer.
I'm getting bored with the pure black Rebel and am slowly adding color.
I was going to use White for the Rim sticker, but I thought it would be better to use the same color as Honda's Emblem, which is a bit raw and silvery, so I chose Light gray, which seems to be the closest color on the Catalogue.
The actual color that I received was a little darker Titanium-like color (but not Gun meta) and I thought it was darker than I expected, but when I put it on, it fit well.
The Rim width of the OEMWheel of REBEL250 is 14mm, so I chose 10mm which seems to be the thickest among the compatible ones.
I wanted to use the special Attachment, but it doesn't support 10mm, so I had to apply it by hand.
With the 10mm Rim sticker, depending on the angle, it looks like the entire Rim is colored, which is cool.
What can I say, the angle is difficult. It's hard to make a circle.
It's a little off, but I'm going to Challenge again when it comes off, so I'm not going to let a little thing get in the way this time.
Degrease it and wet it thoroughly with a thin piece of neutral detergent before applying it.
I match the whole somehow, and when I finish pasting, I adjust it slightly, and finally dry it with Dryer. Or rather, I fix it.
This Dryer was very important.
By applying the Dryer firmly, the Sticker tightens up and absorbs the messy part. I was able to apply the Dryer while tracing it with my finger, and was able to put it on beautifully.
When the Sticker is cooled down, wash it with water to remove the detergent from the Wheel. Now it is completed.
The whole process took about 30-40 minutes.
View detail
It goes up nicely.
I have been using MDF Rim stripe for a long time.
It is durable and can be easily and cleanly applied using the Gauge.
View detail
It's so much cooler now.
I have been using Green OEM Rim sticker on my Z400 since I bought it new, but recently I got tired of it, so I was looking for a good one, and I found MDF Rim sticker. I also bought a special gauge for sticking, and did it while watching the procedure of Site of MDF, and I was able to make it good. View detail
GoldMirror Bracket Exclusive Type (6M) Installation
I used to have these on my V-strom and was satisfied with the quality, so I chose the MDF ones without hesitation.
I thought it would stand out with GoldMirror Bracket exclusive Type, but it's not so flashy and it matches well.
In the beginning, I used a special attaching gauge, but is it not suitable for the Small diameter wheel? It was difficult to adjust the position, so I applied it without using the gauge. There is a place where the matching surface is a little off, but it is not a problem for me because it is not understood unless I look closely.
The effect is Large for a little dress-up.
View detail
what on Earth is this?
I gave the car a proper wash and degreased it and got to work.
No adhesive like.
I couldn't paste even one lap and went to Garbage bin.
The stickiness was Garbage.
View detail
What the hell is this?
I washed the car properly, degreased it and set to work, but the adhesive was as good as gone.
I couldn't even stick it on for one lap.
I immediately went to the Garbage bin.
View detail
A little pricey for what it is.
The quality is Level with no problem.
If you paste it according to the Instruction Manual, you will not have too much or not enough Tape.
I was able to attach it without any problems.
I think it is better to use Maintenance Stand for Rear to put it nicely.
View detail
Imitation Chain
I'm trying to up-date a 30 year old Motorcycle to 2020s style...
I've heard about NS-1 suspension, but if it's CBX, it must be ComStar.
Spice up your ComStar! That's why I put it up.
Yeah, something about Impact and Parenthesis is good!
View detail
It's a little plain.
It was easy and clean to apply. I don't know how durable it is yet. The color was a little plain. View detail
It looks pretty different.
It looks better than without Sticker. I think this is a good price. View detail
The sooner you put it up, the better.
It's not only for dress-up, but also for wheel protection after you buy a new car. It's a great idea to have it on your custom bike. View detail
This is for the off car.
I put it on my CRF250RALLY50.
I've been wearing the Manufacturer's Rim stripe on all my motorcycles for the past 10 years, and using it with the SpokeSkin makes it even more flashy and custom, and it's a Recommendation!
View detail
At the same time as Tire replacement. I used it for the first time.
[How is it used?
I worked with them when I changed tires before the 8 hour Endurance Enduro endurance race.
How was your experience with it?
It's no different than TubeBand and works fine.
How did it compare to other products?
This is a comparison with TubeBand, but the work is more laborious here.
but it is good to use for various Size.
View detail