Reviews
Fits: KAWASAKI GPZ1100, KAWASAKI GPZ900R, KAWASAKI NINJA250R, KAWASAKI NINJA400R, KAWASAKI NINJA650, KAWASAKI NINJA650R, KAWASAKI Z750, KAWASAKI Z750S, KAWASAKI Z800, KAWASAKI ZEPHYR1100, KAWASAKI ZRX1100, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZX-7R, KAWASAKI ZX-9R, KAWASAKI ZX14R, KAWASAKI ZZR1100, KAWASAKI ZZR1200, KAWASAKI ZZR1400
There is an effect that can be seen in the "Hadrill
Vibrations at highway speeds are noticeably reduced, at 80km I don't feel it at all, at 90km it's just a little bit bothersome. Motorcycle is the New Model Eliminator. View detail
Changed from a fixed system to inner weight when handlebar was replaced.
The STD Handlebar uses a type that is fixed to the Inner Weight at both ends of the bar, but the Weight itself is only fixed by the Rubber, eliminating the Stress that causes the Guard to move due to vibration while riding. View detail
Replace OEMHandlebar
Separate Handlebars are too aggressive; Swallow handle is too short
Therefore, it becomes Condor Handle.
However, in the reverse position (where the Grip is lower than the Clamp), there is too little Clearance between the bar and the Blinker.
View detail
Used with Continental handle
I bought a Chromeplating type.
Short Type is suitable for going through narrow places. I have a Continental handle and the rearward visibility is good for a Short Type. I think the blurring that everyone is concerned about is at a practical level even at high speeds.
I've driven about 200 km, mostly down the road, and it was comfortable.
I don't know yet if it is resistant or weak to Rust. I think this kind of plating mirror needs to be cleaned frequently because it rusts easily if left unattended.
View detail
Fits: KTM RC250, KTM RC390, KTM DUKE250, KTM DUKE390, YAMAHA MT-25, YAMAHA MT-03, YAMAHA NMAX, YAMAHA YZF-R3, YAMAHA YZF-R25
Effective in vibration reduction
It is a Single Body and quite heavy. It is certainly effective in reducing vibration. View detail
Thank you very much
I have just received the product.
Thank you for your very good response.
I hope to have a good shopping experience next time.
View detail
Thank you very much
I have just received the product.
Thank you for your very good response.
We look forward to working with you again next time.
View detail
I am satisfied
We would like to thank Advantage for setting up the product despite the small number of units sold, while the OEM Product has been discontinued. View detail
For a slight change in position
[How is it used?
To improve posture
Was the one you received as per Image?
Well, it's Handlebar.
Image
Was the installation difficult?
It has already been drilled for switches and other devices,
If you have experience in Oil replacement, I think you can pimp it out.
How was your experience with it?
It fit my physique.
[Was there anything that disappointed you?
Cable replacement is unnecessary. but I have the impression that it is quite tight and there is no room.
I think you would need to change the handling if necessary,
It may not be easy with W wiring.
View detail
Delicate product!
The Ideas is very nice but too moronic. The Torque wrench is specified for tightening, but would you use a Torque wrench to tighten it if it comes loose on the road? Ideas is good, but please improve it! View detail
Parenthesis is good, but ….
The OEM grips were a little too thick for me, so I bought the thinner domino grips. The product itself is Wow, Parenthesis is good. The tension was raised like this, but the feeling of use is very thin, so the handling of the motorcycle is very large and I even feel that the motorcycle has become heavier by about 10%. When I am running the bike, I can feel the weight of the bike. Maybe a little too thin." It was like that.
Roughly speaking, a Grip that is too thin with a body that weighs about 190 kg will simply be difficult to ride.
View detail
Fits 23-year 400X
I've been trying to find out and inquire if it will fit a 23 nc56 400X.
I could not confirm it, but I was able to install it.
It seems that the brake master is different from the previous generation SingleDisc brake models.
Installation was easy.
View detail
A little Custom
Used for DL1000 V-STROM250.
I wanted to customize it a bit, so I decided to make an affordable Mirror replacement.
It looks different, but weighs less than Normal mirror.
So there may be some changes in Handling.
Rear visibility is fine while driving.
View detail
Great cost performance!
I was looking for a Grip to install on my WhiteBlueGLADIUS650400 and found this.
The straight line design fits well with GLADIUS 650.
The grip is nice and moderately soft.
I have not run the distance yet, but I think it could be compared to PROGRIP.
This is a satisfying experience for a purchase price of a little over $1,000.
I can recommend it
At any rate, I have ordered another pc. in a different color.
View detail
Parenthesis good!
The grip is also easy to grip, and even if you buy it for its design, Large is very sturdy!
The texture and quality are totally good.
View detail
It can also be used on the lower road!
I bought it on impulse, thinking that it would be good if I could use it mainly on downhill roads. Surprisingly, my right hand became very comfortable. I have heard some people say that they can't use it because it slides too much, since the grip varies depending on the large size and texture. In my case, it was just right. So, if you feel it is going down, you can easily put it back up. It almost never comes down, though. This is a great buy! I wish I had tried it sooner! View detail
Fits: HONDA CRF250L, HONDA CRF250M, KAWASAKI D Tracker, KAWASAKI KLX250, SUZUKI DR-Z400S, SUZUKI DR-Z400SM, Others
Sporty TRAILHandlebar
Mounted on SEROW225. I used to use a Narrow Handlebar to attack the woods, but it was difficult to control and the form did not look good. The SEROW225 has less of the SEROW's "TRIAL" feel, but it is still great for situations such as Black Cannon and Motocross courses where you are standing still and driving at relatively high speeds. The texture is good, and the color is also very appealing, so I would like to repeat this every time I bend it in the future. View detail
Fits: HONDA FTR223, HONDA GB250 CLUBMAN, HONDA CB400SS, HONDA MAGNA(V-TWIN MAGNA), KAWASAKI 250TR, KAWASAKI W650, KAWASAKI W400, KAWASAKI VULCAN400, SUZUKI GRASS TRACKER, SUZUKI ST250, SUZUKI RV200 VANVAN, SUZUKI VOLTY, YAMAHA SR400, YAMAHA SR500, YAMAHA TW200, YAMAHA TW225E, YAMAHA DRAGSTAR250, YAMAHA VIRAGO250(XV250), YAMAHA SRV250, YAMAHA RENAISSA
unique quality products
I bought this years ago. I love the clean and simple look of the handlebars. I shortened the length a little. I had a little accident. The bracket was broken, I repaired it by welding. That's why it started to rust. I love the way it looks. The mirror is very easy to use, the viewing angle is sufficient. I disassembled the fork for oil change, I will clean the rusty. I will buy another one again for my Xs 650 project. I definitely recommend it. View detail
Fits: HONDA Monkey Limited (MONKEYLIMITED), HONDA SUPER CUB 110 (SUPER CUB), HONDA Monkey (MONKEY), HONDA ZOOMER (ZOOMER), HONDA ZOOMER, HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA SUPER CUB 110 (SUPER CUB), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA LITTLE CUB (LITTLE CUB)
MR-A8S
My friend was worried about thread protection in the consoles of his SUPER CUB CUSTOM, I offered him these spacers. As expected, there are no complaints about the product, the installation went without problems, everyone was satisfied. If you are thinking about protecting the threads in the remote control and placing some additional equipment (windshield, phone fasteners or additional light), this is an excellent solution. View detail
Fits: YAMAHA DT230LANZA, YAMAHA TW200, YAMAHA TW225, YAMAHA TRICKER, YAMAHA XT250X, YAMAHA XT250, YAMAHA TTR250, YAMAHA SEROW250, YAMAHA SEROW225, YAMAHA WR250X, YAMAHA WR250R
Turning blue
The short lever of the RALLY50 I have been using since the XG250 TRICKER rattled, so I decided to go out on a limb and replace it with this one.
You can see it shining Blue when you get on it, but you can't see it from the front because of the hand guard.
I don't think there is any difference in operability between the Short lever and the Large lever I was using before, but the range of adjustment is increased.
The OEM rubber cover cannot be installed as is and requires modification.
I kind of cut along the Bellows and it looks like the picture.
View detail