Reviews
This was a necessary upgrade from the original parts that were included in the 4 valve head kit
About quality and texture - The stopper plate and rocker arm shaft set from SP Takegawa is made from steel with an improved design over the original, the quality from the overall fit and finish is perfect. About the feeling of use - This was a necessary upgrade from the original parts that were included in the 4 valve head kit and I was lucky that the failure of the stopper plate did not lead to major engine damge. I did contact SP Takegawa about this issue but was ignored by their customer service which was disappointing. Products to buy together - A key product to purchase when freshening up the top end of the engine is a new gasket set as it is far from advised to reassemble this area with used gaskets. Difficulty of installation - The installation of the stopper plate and rocker arm shaft set is an simple task that took 0.5 of an hour to complete. Some mechanical aptitude and the use of assorted hand tools is what is required to disassemble this part of the engine, fit the the stopper plate and rocker arm shafts and then button the engine back up. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the stopper plate and rocker arm shaft set is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the stopper plate and rocker arm shaft set, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
Takegawa Power Filter!!
Takegawa Power Filter!! There was some difficulty in unpacking and installing the pieces due to limited space, but it is easy to install!! The product quality is extremely excellent and I am very excited about its performance!!! I don't know the output, but I have high expectations as the exhaust sound will be louder. Delivery is very fast and I really like the product -------------------------- -------------------------------- Takegawa Power Filter!! There was some difficulty in unpacking and installing the pieces due to limited space, but it is easy to install!! The product quality is outstanding and I am very excited about its performance!!! I don't know the output, but I heard the exhaust sound will be louder, so I have high expectations. Delivery is very fast and I really like the product. Powered by Google Translator View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Great kit!
This gave the crankcases a really proffesional finish! I was really happy with how it went during the install and all the bolt lengths seemed to match the OEM View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
High quality
Great item, it was very handy that it came with the new washer to suit the bolt. Great quality item and was packaged well. Very happy and would buy again. View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Great kit!
This is a great kit! Looks great on the bike, it fitted really well and gave the engine casings a really proffesional finsih which is what i was after! View detail
Fits: HONDA BENLY50CD90, KAWASAKI D-TRACKER125, KAWASAKI KSR110, KAWASAKI KLX125, KAWASAKI KLX110, SUZUKI ADDRESSV125, HONDA CBR250R, HONDA DREAM50, HONDA DAX, Others , HONDA MONKEY, HONDA GORILLA, HONDA CRF50F, HONDA MAGNA50, HONDA Ape50, HONDA Ape100, HONDA XR50R, HONDA XR50 Motard, HONDA XR100 Motard
Great option
This product is a great idea to warm your engine oil up properly! I was super happy with it and felt the bike warmed up alot quicker to operating temperature, easy to fit and install View detail
Look Great!
I built a twin cam head for my gorilla and was worried about getting crank case damage from the extra power so this was a great option as it installed and fitted really well View detail
Made the oil cooler lines look really tidy
I was super happy to see this product arrived, it kept the oil lines from hitting the exhaust and also made them look very orginised as it was super easy to install View detail
Fits: HONDA GROM125, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
great aftermarket option
My original item was U/S so was good to be able to get a high quality repalcement part that fitted really well! Would recomend to anyone to buy! View detail
Great replacement item
My original item was U/S so was good to be able to get a high quality repalcement part that fitted really well! Would recomend to anyone to buy! View detail
That's the way it's supposed to be.
Mounted on KATANA
It's like something else.
That's what I'm talking about.
View detail
Fits: その他 FCR Single Carburetor Horizontal (H/Z) Large, その他 FCR Multi-Carburetor Horizontal (H/Z) Large, Others FCR Carburetor Body Single carburetor Horizontal(H/Z) Large type, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Large type
the expendables
The rips were not improved by replacing the lip seals, and I finally replaced them because I was afraid of damaging the body as the wear had progressed considerably. The operation noise became quieter, but the problem of the rotation not slowing down improved or did not improve, so I think I need to work on the tuning a little more. View detail
Parenthesis good. The price is ….
Looks nice Parenthesis of course.
Since the OEM is a fish grill, the replacement effect is excellent, along with the Oil cooler below.
However, I wonder if it is expensive for a product punched out of a thin Stainless steel plate.
View detail
You'll feel better acceleration, but the embracing will not work.
[How is it used?
Commuter Main
Was the one you received as per Image?
Yes
Was the installation difficult?
it's simple
However, the included instruction manual is WhiteBlack and halfway detailed, so it is difficult to find the orientation.
Also, the arrows were reversed.
When in doubt, try breathing in and out. (Mouth) is the Engine side.
How was your experience with it?
As others have said, the Response and acceleration feel is something better.
Embellishments will not work lol.
For those who use a lot of embellishments, it will be weird until you get used to it.
It is not suitable for driving on a mountain pass or something like that because the embellishments will not work as well.
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900
It was helpful
[How is it used?
As a secondary Cover.
The OEM engine slider only protects above the waist, and the Generator Cover and Clutch Cover are usually grounded.
Was the installation difficult?
It is easy, but since it is a Bolt around Engine, Torque management is recommended.
How was your experience with it?
Fortunately, thanks to the OEM Slider and this MotorArmour product, the engine did not crack or spray oil.
The Clutch cover had some paint peeling off, but after touch up and polishing, the scratches were not noticeable.
The clutch cover is about 15,000 yen, and if you want to replace it, the cost for the parts alone, including the gasket and bearing, is about 20,000 yen, which is not much different from Armour's cost.
It is not a perfect defense, so be careful if that is what you are looking for.
If you are driving on a circuit, you must have a secondary cover because it would be a nuisance to Large if you spread Oil all over the circuit.
[Request to Manufacturer
As for Trickster's products in general, I wonder if Rose sales could be a little cheaper.
View detail
DAX125 T-REV installed.
Smooth acceleration. Acceleration is better, View detail
Fits: KAWASAKI Ninja H2, KAWASAKI H2 SX, KAWASAKI H2 SX SE
??Flexible
??Material of the enclosure of the Air cleaner itself is,
The material is moderately resilient, so it can be used with Motorcycle air cleaner box.
The new system can ensure further adhesion to the
H2SX is equipped with Super charger,
In the sense of avoiding Charger's Filter exchange.
We plan to address this issue through frequent FilterMaintenance.
Also,
The price is high, but it is an excellent product that can be cleaned and reused.
View detail
Genuine GBRacing Engine cover set for Ninja 650
This is a set for the Ninja 650 of a customer who wanted to add a little more protection to the casing of their bike. I have personally used GBRacing many times in the past for both my bike and customers bikes and know they are second to none for protection of you beloved. Finding the correct set was really easy as Webike do list all the models these kits fit. I also cross checked this with GBRacing website just to be sure I did not write the wrong number down. Really good price for this set from Webike and pretty much the same as I could source locally here in the UK. Yes, you can get other manfacturers who make sets like these but I have my own experience of how well these perform in the event of an off. They do take a good beating but essentially, these are to protect you casing. They also look really cool too. For all you get in this kit, the value for money is brilliant, 3 pieces in total and one of the best set of bolts you could ask for. There is the alternator cover and clutch cover and finally the pulse cover. Great price for a 3 piece set. The composite is not just plastic like some of the other kits you can buy, they have a percentage of fibre too for strength and durability. GBRacing have really done their homework here and I can confirm the durability is epic. All was packed out really well and even the small pieces were protected during transit. Upon opening the set box, I was really happy to find all was present and correct, the right amount of bolts etc is always a bonus. Having had previous experience in fitting these, it was a piece of cake. It's pretty much the same for each model anyway. Take your time, set out the individual covers and allocated bolts and it's alot easier than fumbling for the right bolt. The customer is really pleased with this kit and to be honest, I am too. Looks great. Thank you Webike, awesome services. View detail
Looks great and matched the allen key engine bolts
Was really happy that i could buy a set of these bolts as they looked great and matched my allen key engine bolts, they fitted really well and the nuts were very tight so they couldnt vibrate loose. View detail
Fits: HONDA CD50, HONDA MONKEY, HONDA KITACO MONKEY series Bore Up Kit (Standard/Standard Type2) Cylinder head, HONDA GORILLA, HONDA DAX, HONDA CHALY 50, HONDA CHALY 70, HONDA DAX70
Great power mod for the price
This ws an awesome power mod for price, gave the bike a nice grumble and felt like it had some more power down lov in the rev range, fitted really easily View detail