Reviews
Dream rear stand
Very well made rear stand. Easy to use. Unfortunately due to tight construction, rear wheel can't be turned while bike on stand. Otherwise I'm very happy with this product View detail
I think it looks sturdy and has good cost performance.
The pipe is thicker than I expected from the picture, and it looks sturdy enough that I don't feel uneasy at all when I straddle Seat while lifting it with this.
I'm thinking of buying another set for one vehicle or so, since all I have are motorcycles that don't have center stands.
View detail
Unexpectedly necessary! It's so handy to have!
Grom For maintenance.
I think it's a solid product.
Plating is Cool
View detail
It's a must if you're going to do the maintenance yourself
First, look for a Type that has a Bobbin attached to a Swing Arm and lifted by a Y-shaped Arm But I couldn't find anything to fit the groms This Rubber arm lifted Type is simply a Square Type bar with Rubber is wrapped around the Swing Arm (which is also square like a grommet) You only need to lift it up by hooking it on the It is not
In terms of actual use, Quantity:Pair (for Left and Right) You don't have to worry so much about positioning the Once it's up there (if the ground is hard and flat, we're concrete), it's very stable and First of all, stand upright so that you don't feel like you're going to fall down, and then you can do the usual things like cleaning the Chain and lubricating it It is already useful for maintenance and installation of custom parts I'm there We're still very new to the process, but if you're going to start working on it, this is the kind of Rear You should definitely get a stand, I think you should get a STAND to lift your car upright and keep it upright It's kind of nice just looking at them!
View detail
Satisfaction over function
It had been wanted for some time, but Motorcycle was knocked down by the typhoon and Large repairs were required I took the plunge with Timing that I needed and bought a front and rear STAND
It's not surprising that the ease of maintenance is improved A sense of doing is a great way to get upset
HondaCBR250RR (MC22) 、GROM (JC75) It is used in
What made you decide to buy?
In addition to the above, we selected Plating because of its appeal
Image to match if the color is a Manufacturer vehicle that has drilled The Plating was the most appealing to me, although it seems to lift my mood with
How was your experience with it?
The ability to easily jack-up and maintain at any time is even better than I expected
The ease of washing the car alone makes a huge difference
Chain cleaning and grease up is now easier, so I have to do it more often than before Maintenance
The ease of maintenance and the range of maintenance that can be performed is increased It was very satisfying to see a motorcycle on the stand
That's what the Motorcycle hobby is all about!
View detail
It's a must for maintenance
Of course, the oil exchange is used in HondaGROM It is useful in Maintenance, Chain exchange, and Sprocket exchange
The stability is also safe to use
View detail
Why did not you buy it soon!
Purchased like Hara 2.
Until now, I used Side Stand and stayed on the wall
Let me hang it and remove Rear tire
I wish I could buy it sooner.
Large type has for Hook bolt, but it does not match
So it was impossible.
I use mind more than HookBolt type,
If Hara 2, the car body is also light, there is no problem even for one person.
To do.
Pretty Maintenance has become easier.
In addition to tackle Front and Rear suspension
Is it Jack?
View detail
Ideal for Maintenance
I think that I did a good shopping.. Cost performance is also good, even though Side Stand has no problem, I use this easily and are using it for Maintenance and Custom easily. View detail
Easy to use!
J-Trip etc was also a candidate, but I liked Chromium Plating and liked Ethos Design's items so select this.
It can not be used within my narrow Transporter because of Long Type, but it is very easy to use other than that.
It is cool to use together with Front stand of the same color!
View detail
Best product
I'm using Color type, build is same.
Small Space. (It can be lifted by hand with one hand support)
Thanks to Caster I can move and I can cut Handlebar.
Quantity : Pair (for Left and Right) Because Arm has high degree of freedom of direction, positioning is also easier.
View detail
Work efficiency increases to Large width!
I use an old model, but it is handy because I can very easily do Lift up.
Actually alone, I'm Lift up ZEPHYR 1100, but until now there is no failure. However, because Roller does not turn when used on the ground, some power is required.
View detail
There is a heavy feeling, it seems to last long.
I got lost by Ethos, Battle factory, JTrip, but decided to Ethos with a solid feeling with Stainless Steel. As a result, there was no regret. Because R25 is light, you can put a STAND on alone while fixing Tail cowl with Left hand. Exclusive Design's Battle factory looked nice, but given the latter things, I thought that it would be preferable to use width adjustment because I could also use it for my friend's Motorcycle.
JTrip is not bad, but as I looked at other people's reviews it seemed rusty. Lever is long, Lever is easy to work up, Race ish looks as well, but be careful as passing through the back of Motorcycle as it blurs, as it may stumble (Lol)
View detail
It purchases in order to maintain by itself. It becomes easy to give cleaning, adjustment, etc. of the Chain to this [ this ] by using the Maintenance stands. hanging from the J Trip's thing, since V character Hook of the Ethos
It purchases in order to maintain by itself.
It becomes easy to give cleaning, adjustment, etc. of the
Chain to this [
this ] by using the
Maintenance stands.
hanging from the
J Trip's thing, since V character Hook of the
Ethos has short one side although compared also using the
J Trip's thing -- easy --
-- further -- a Caster's favor --
-- the Lift up was able to be carried out easily.
--
-- I think whether since the result of goods is beautiful, there is also any pleasure to
see again.
--
-- it was a dramatically satisfying article.
View detail
Since the center stand was not attached to its own motorcycle, it mainly purchased to care and cleaning of the chain. Although it wavered with the J trip's thing, it became a conclusive factor that the stand here was strong plating processing. It
Since the center stand was not attached to its own motorcycle, it mainly purchased to care and cleaning of the chain.
Although it wavered with the J trip's thing, it became a conclusive factor that the stand here was strong plating processing.
It was surprised for it to be too light when a stand was applied for the first time.
There is also no necessity of also applying weight and it will carry out lift up lightly only by the power of a hand.
It becomes touch that a stand is hidden for having carried out the car body, without a motorcycle also moving forward and backward, since it is a model at the time of a caster.
It is convenient, if it is Colet even if there is only the last space.
I regard what does not have a fear of coming off as treatment somewhat coarsely since it is plating processing too in it as it being the merit which chooses this.
View detail
The stand of RIA is a thing of ethos. If it gets used, a stand-up can be carried out comfortably alone. By the favor of this stand, maintenance called attachment and detachment of a chain or a tire can be performed comfortably. It is what now
The stand of RIA is a thing of ethos.
If it gets used, a stand-up can be carried out comfortably alone.
By the favor of this stand, maintenance called attachment and detachment of a chain or a tire can be performed comfortably.
It is what now is indispensable.
Since V character hook will be metal nakedness if allowed to say one avarice, there are a swing arm and a possibility of in addition to this damaging the circumference of rear one.
It is ~ [ if ] if rubber coating is carried out (>_
View detail
It purchased in order to carry out maintenance of the circumference of rear one by itself. Is it really found useful to work alone? Cleaning of the wheel also became easy, it also came to reach the circumference of lower and work became easy.
It purchased in order to carry out maintenance of the circumference of rear one by itself.
Is it really found useful to work alone?
Cleaning of the wheel also became easy, it also came to reach the circumference of lower and work became easy.
Although other you are writing, since height adjustment etc. are possible and the roller is also attached, user-friendliness is dramatically good.
It is the recommendation !.
View detail
He thought that he would carry out maintenance of the circumference of a rear tire at home, and it purchased. The thing which the height control of is possible while many maintenance stands have come out, and can also perform adjustment of width, and
He thought that he would carry out maintenance of the circumference of a rear tire at home, and it purchased.
The thing which the height control of is possible while many maintenance stands have come out, and can also perform adjustment of width, and also the thing with a roller were chosen.
It could use, could work very comfortably and is satisfied.
We recommend it especially to those who work alone in many cases strongly.
I thought that it was a disadvantage thing which is not.
View detail