Reviews
It can not be used for GSX 1100S
It is explained that it corresponds to most Motorcycle, but it was not usable for GSX 1100S. Because the position of the vehicle's Stem hole is high, Front tire will not float even if the STAND is the longest.
I am using only genuine to keep the state as it is after the Tire is removed, without ginger, Tire is floated to remove Tire using Jack.
We need a little more polite explanation.
View detail
Firm making
When I lost color of Front stand and I was at a loss, I found out the existence of this item and purchased.
Can be used without problems, quality is better than the original one. Lineup of such Parts is appreciated.
View detail
There is no choice because there is only this!
While thanking you for making it exclusively for DREAM 50, some points.
I am using it when exchanging Oil or Maintenance of Chain, but I need a little courage and hang to be able to ride alone.
After that, according to other people 's Review, Spolcket' s Bolt interfered quickly, Plating half Pipe (Protective Pipe?) It is easy to peel off.
But I am thankful that you have sold it with exclusive items after all.
View detail
Hang may be there
I feel a little unstable when I raise it compared to receiving L-Type.
It will stabilize once it goes up,
If you do not plug straight in to the car body
It may be dangerous.
Texture etc etc. Is very nice.
View detail
Convenient if there is one. And it can be used for a long time
CBR600RR (Racer) & CLEVERWOLF made Cowl
I am using it in the above-mentioned vehicle.
It is essential item for using Tire warmer in Circuit.
Rear also unified with STAND of Ethos Design. Plating is beautiful!
Because of the Cowl shape, the Upper Cowl lower part was slightly interfered.
Personally I do not mind Level.
Compared to J - trip like STAND,
Self-reliance is solid when folding without using it. (It can not open and fall)
I think I am a Good Point!
View detail
Easy to use!
J-Trip etc was also a candidate, but I liked Chromium Plating and liked Ethos Design's items so select this.
It can not be used within my narrow Transporter because of Long Type, but it is very easy to use other than that.
It is cool to use together with Front stand of the same color!
View detail
For light weight
When we diverted it to heavy-duty cars by other manufacturer's FSTAND, Adapter bent.
Up to 400? Class may be the usage limit. (Adapter diameter : 13mm)
So, let's avoid diversion. Let's keep using FSTAND of Body's Ethos to a light vehicle.
View detail
Best product
I'm using Color type, build is same.
Small Space. (It can be lifted by hand with one hand support)
Thanks to Caster I can move and I can cut Handlebar.
Quantity : Pair (for Left and Right) Because Arm has high degree of freedom of direction, positioning is also easier.
View detail
Withstand load
Although the product loading capacity is indicated as 330 kg load resistance
The manual is written with load capacity of 250 kg.
I have not actually used it yet, but I feel uneasy.
View detail
![[Spare Parts] Rear Stand Arm](https://global.webike-cdn.net/photo/article/37/1456572236937L.jpg)
Stabilize
I used the old STAND of ETHOS, but because of Swingarm shape of Motorcycle, the hook was sweet and unstable in Rubber reception, so I made it a combination of V order Arm + Hook bolt.
Truly OEM. Fixed part is perfect.
It will also stabilize when it is set to V, and since it will not escape when making a STAND-UP, it is easier to work.
View detail
Work efficiency increases to Large width!
I use an old model, but it is handy because I can very easily do Lift up.
Actually alone, I'm Lift up ZEPHYR 1100, but until now there is no failure. However, because Roller does not turn when used on the ground, some power is required.
View detail
Without Center Stand car necessities
Chain Maintenance, Wheel Cleaning, Appearance Fun - - - I am variously active in Large. Actually I was looking for Y's Gear made, but I made a choice with production ended.
The Pipe diameter of Body is good from the viewpoint. I think that the rigidity is perfect. By the way it is a combination of Hook bolt + VHook.
As soon as I come up with it, I will run it as soon as possible, so I'm typing, so I do not think about time and work in the middle of the night, but I'm hanging on by myself alone. But if you prepare a little thing, it is very easy. In the case of my author, I lay a wooden board under the Side Stand and hang the car body in a state close to horizontal. When unloading, put Side Stand out and put the board on the bottom, so that the Side Stand will ride on the board as soon as the STAND goes off. If you get used to it you will not have to worry about knocking down the car.
Because it is VHook, in addition to having less contact surface with Hook bolt, there are things that Bearing is used for Caster, so there is no need for forces to take off and it is possible to do Smooth. Body has a reasonable weight, if you dare say that degree.
View detail
There is a heavy feeling, it seems to last long.
I got lost by Ethos, Battle factory, JTrip, but decided to Ethos with a solid feeling with Stainless Steel. As a result, there was no regret. Because R25 is light, you can put a STAND on alone while fixing Tail cowl with Left hand. Exclusive Design's Battle factory looked nice, but given the latter things, I thought that it would be preferable to use width adjustment because I could also use it for my friend's Motorcycle.
JTrip is not bad, but as I looked at other people's reviews it seemed rusty. Lever is long, Lever is easy to work up, Race ish looks as well, but be careful as passing through the back of Motorcycle as it blurs, as it may stumble (Lol)
View detail
Ideal for Off-road vehicles
I also entered XR 250 with 4 cm LOWdown.
Until now it was a beer Case, but the stability feeling during maintenance around the Front and Rear is quite different.
It was easy if you did it like a center stand.
It was good enough to make me think that I should have bought it without failing from the beginning.
Height adjustment is a little troublesome, but once you match the height, it is so clear that you do not mind later.
Recommendation for those who maintain themselves.
View detail
I do not have such a useful thing.
I regularly used Ethos' Maintenace Stand. Until now, there have been cases where the mistakenly defeated Motorcycle.
When Lift up, the STAND Hook will be out of Swingarm.
Knowing that there is a STAND of the Penetrating formula, while thinking that I should replace STANDBody, I will display the site color.
How! There is a hole in my STAND to use PenetratingShaft!
Thanks and thanks for your continued support.
View detail
Is it just for keeping it a little?
I am thankful just to have made MaintenanceSTAND for DREAM 50
As pointed out by the former person, the receiving Rubber sheet and Plating's half Pipe can be removed immediately
Still useful for maintenance around the back
Is it for the people who decorate the making?
By the way, the thing made by Honda access is the same thing that the width is a little narrow and turning the rear wheel and Sprocket's Bolt hit and it is difficult to turn around
View detail
The Shirabe degree was able to use for the Chromoly axle shaft (rear) of JB Power.Since the diameter or die length of the Shaft were not writing to description of item, it was gamble.It is about 60 cm for a long time with die length bein
The Shirabe degree was able to use for the Chromoly axle shaft (rear) of JB Power.Since the diameter or die length of the Shaft were not writing to
description of item, it was gamble.It is about 60 cm for a long time with
die length being unexpected.The
diameter is about 8 mm.
Since it has not measured, an exact numerical value is not known.
View detail
a Rear stand -- 々 -- although it is used for 3~4 years, there is no dissatisfied point in particular. Even if using it deducts a saying to a lightweight Machine point, a Lift up can be carried out lightly. Feeling of purity may also suit finishing
a Rear stand -- 々 -- although it is used for 3~4 years, there is no dissatisfied point in particular.
Even if using it deducts a saying to a lightweight Machine point, a Lift up can be carried out lightly.
Feeling of purity may also suit finishing of the
Plating.
If it covers with the mat for Maintenances, from a crack or a Rust, grounding with the
ground surface is also unrelated, and it can require it.
-- it uses ten years or at least 20 years as it is -- there is admiration firmly --
-- I think that good shopping was made.
View detail
It purchases in order to maintain by itself. It becomes easy to give cleaning, adjustment, etc. of the Chain to this [ this ] by using the Maintenance stands. hanging from the J Trip's thing, since V character Hook of the Ethos
It purchases in order to maintain by itself.
It becomes easy to give cleaning, adjustment, etc. of the
Chain to this [
this ] by using the
Maintenance stands.
hanging from the
J Trip's thing, since V character Hook of the
Ethos has short one side although compared also using the
J Trip's thing -- easy --
-- further -- a Caster's favor --
-- the Lift up was able to be carried out easily.
--
-- I think whether since the result of goods is beautiful, there is also any pleasure to
see again.
--
-- it was a dramatically satisfying article.
View detail
If compared with the product made from the ducati performance which was being used before, he will have a light and cheap feeling. however, this one is solid and the motion of a roller is also good -- it comes out by carrying out and is a good point.
If compared with the product made from the ducati performance which was being used before, he will have a light and cheap feeling.
however, this one is solid and the motion of a roller is also good -- it comes out by carrying out and is a good point.
Since this general-purpose stand is not a vehicle type exception, a lug worries it dramatically.
Although it is unavoidable one since it becomes high in case of a vehicle type exception, if it uses for a long time, the recommend of the type according to that vehicle type will be carried out to the make of the other company.
View detail