Reviews
Easy Dress-up
I installed it in the edge of Tank.
I was able to do Dress-up easily with just work pushed into the gap.
Even if it is peeled from now, I think that this price is appropriate.
View detail
Withstand load
Although the product loading capacity is indicated as 330 kg load resistance
The manual is written with load capacity of 250 kg.
I have not actually used it yet, but I feel uneasy.
View detail
![[Spare Parts] Rear Stand Arm](https://global.webike-cdn.net/photo/article/37/1456572236937L.jpg)
Stabilize
I used the old STAND of ETHOS, but because of Swingarm shape of Motorcycle, the hook was sweet and unstable in Rubber reception, so I made it a combination of V order Arm + Hook bolt.
Truly OEM. Fixed part is perfect.
It will also stabilize when it is set to V, and since it will not escape when making a STAND-UP, it is easier to work.
View detail
I chose Large young.
When I made STAND, I thought that Size should be Large, I thought it would be better if I looked at photos and made this product looking like Large.
I feel that the STAND is hard to come off as the level difference of the Hook part is also Large..
Because Anodized is also pretty, it has not been peeled off so far as I made a STAND call several times.
Large It is easy to hang and is cheap so it was good.
By the way, the 2014 DAYTONA 675 is M8Size.
View detail
Work efficiency increases to Large width!
I use an old model, but it is handy because I can very easily do Lift up.
Actually alone, I'm Lift up ZEPHYR 1100, but until now there is no failure. However, because Roller does not turn when used on the ground, some power is required.
View detail
Design excels
Ethos' Gasoline Carrying Can is 1 L, 2. There are 3 types of 5L, 5L, but eventually I bought 3 kinds. I am choosing Gasoline cans to be loaded on the car according to the situation to use. View detail
Without Center Stand car necessities
Chain Maintenance, Wheel Cleaning, Appearance Fun - - - I am variously active in Large. Actually I was looking for Y's Gear made, but I made a choice with production ended.
The Pipe diameter of Body is good from the viewpoint. I think that the rigidity is perfect. By the way it is a combination of Hook bolt + VHook.
As soon as I come up with it, I will run it as soon as possible, so I'm typing, so I do not think about time and work in the middle of the night, but I'm hanging on by myself alone. But if you prepare a little thing, it is very easy. In the case of my author, I lay a wooden board under the Side Stand and hang the car body in a state close to horizontal. When unloading, put Side Stand out and put the board on the bottom, so that the Side Stand will ride on the board as soon as the STAND goes off. If you get used to it you will not have to worry about knocking down the car.
Because it is VHook, in addition to having less contact surface with Hook bolt, there are things that Bearing is used for Caster, so there is no need for forces to take off and it is possible to do Smooth. Body has a reasonable weight, if you dare say that degree.
View detail
There is a heavy feeling, it seems to last long.
I got lost by Ethos, Battle factory, JTrip, but decided to Ethos with a solid feeling with Stainless Steel. As a result, there was no regret. Because R25 is light, you can put a STAND on alone while fixing Tail cowl with Left hand. Exclusive Design's Battle factory looked nice, but given the latter things, I thought that it would be preferable to use width adjustment because I could also use it for my friend's Motorcycle.
JTrip is not bad, but as I looked at other people's reviews it seemed rusty. Lever is long, Lever is easy to work up, Race ish looks as well, but be careful as passing through the back of Motorcycle as it blurs, as it may stumble (Lol)
View detail
I am mostly satisfied..
Since Leather Gloves became old, I found it for 3Season and found it. Because Motorcycle is 400ccSingle and oscillation is Large I am interested in the utility of AssistPad and purchased it.
Product making is solid, Design also follows Image, Size set to L, but I think that LL was better, but there is no problem in practical use.
I used it once for Day Touring, but the effect of AssistPad is not clearly felt, and as the picture is, the total length is short and the wrist is not covered, so I think that preference is divided for this point. Because Velcro is also solid, the feeling of Fit is good.
Overall, I am generally satisfied.
View detail
Ideal for Off-road vehicles
I also entered XR 250 with 4 cm LOWdown.
Until now it was a beer Case, but the stability feeling during maintenance around the Front and Rear is quite different.
It was easy if you did it like a center stand.
It was good enough to make me think that I should have bought it without failing from the beginning.
Height adjustment is a little troublesome, but once you match the height, it is so clear that you do not mind later.
Recommendation for those who maintain themselves.
View detail
Red Small makes me cute w
As I arrived, I pasted this sticker with myself, so I painted it only with black w
Basically I bought it thought that I should use it for storage of mixed Gasoline which could not fit in the truck.
"Mixed" And I also pasted my own Sticker
Small volume with volume 5 Liter, as well as small spout of pour spout and distinctive protrusion are very cute w w
I can not see the rugged ruggedness like the 10 and 20 Liter carrying cans I normally use, it is pretty cute w
I think that it will be active in the future w
View detail
Excellent operability!
As expected Trial Gloves. Lever, Throttle can operate with a feeling close to bare hands.
Since it was made by the manufacturing method which can not do Wrinkle in the palm of hand when it grips, it has become possible to perform delicate Throttle operation.
I tried to use some other Manufacturer's Gloves, but TRY-1 was familiar with first hand and each operation was easy.
I also believe that you will probably last long because the fabric is solid and the sewing method is also polite.
Also, around the Magic tape part of the wrist has become a material like Towel land, sucking sweat well, the circumference of the wrist is very comfortable compared to other Manufacturer Gloves.
Probably I think I will also buy this Gloves next time.
View detail
I do not have such a useful thing.
I regularly used Ethos' Maintenace Stand. Until now, there have been cases where the mistakenly defeated Motorcycle.
When Lift up, the STAND Hook will be out of Swingarm.
Knowing that there is a STAND of the Penetrating formula, while thinking that I should replace STANDBody, I will display the site color.
How! There is a hole in my STAND to use PenetratingShaft!
Thanks and thanks for your continued support.
View detail
A bit expensive but
I installed it in Tank.
Tank I did not want to get scratched by rubbing on desorption, but now the mall is doing good work as scratch prevention.
The installation of the mall was easier to put in several steps than the mall dealing in the market. I am satisfied because I was clumsy quickly even I was clumsy about my hands.
I felt the price a bit high, but I think whether it is a reasonable price considering labor.
View detail
Is it just for keeping it a little?
I am thankful just to have made MaintenanceSTAND for DREAM 50
As pointed out by the former person, the receiving Rubber sheet and Plating's half Pipe can be removed immediately
Still useful for maintenance around the back
Is it for the people who decorate the making?
By the way, the thing made by Honda access is the same thing that the width is a little narrow and turning the rear wheel and Sprocket's Bolt hit and it is difficult to turn around
View detail
The Shirabe degree was able to use for the Chromoly axle shaft (rear) of JB Power.Since the diameter or die length of the Shaft were not writing to description of item, it was gamble.It is about 60 cm for a long time with die length bein
The Shirabe degree was able to use for the Chromoly axle shaft (rear) of JB Power.Since the diameter or die length of the Shaft were not writing to
description of item, it was gamble.It is about 60 cm for a long time with
die length being unexpected.The
diameter is about 8 mm.
Since it has not measured, an exact numerical value is not known.
View detail
The last Impression was a lie. With the Bolt of M10P=1.25, it was unprocessed and has equipped. He was Daque who the Bolt passed and was hateful. -- a fixing position (direction of rotation) probably because the core of an attache
The last Impression was a lie.
With the Bolt of
M10P=1.25, it was unprocessed and has equipped.
He was Daque who the
Bolt passed and was hateful.
-- a fixing position (direction of rotation) probably because the core of an attached Bolt however does not suit -- surroundings
-- there was a hateful place, and in total, when hateful [ the surroundings ], there was the necessity of
taking in search of the place which turns a bearing and around which it turns lightly, and attaching.
Merit that's right [ method / of
which put in an about 10-mm Spacer since
left-hand side was worn a little to the Swing arm ].
View detail
I use in the case of exchange of a Brake fluid. If it is sampling of such liquids, it is still good, but if it is called exhaust air omission, he will have a feeling which has leaked a little. If it thinks so, I will feel that it is high for t
I use in the case of exchange of a Brake fluid.
If it is sampling of such liquids, it is still good, but if it is called exhaust air omission, he will have a feeling which has leaked a little.
If it thinks so, I will feel that it is high for this price.
Rather than
exhaust air omission, I consider that it is better to use as Oil omission.
View detail
I think that it is clearly known if the Bolt of P1.0 the Screw standard practice of the Hook bolt is [ 1.0 ] the appearance of M10P1.0 is under arrangements and it receives although it is Versys650 with few somethings and amounts of information.
I think that it is clearly known if the Bolt of
P1.0 the Screw standard practice of the
Hook bolt is [ 1.0 ] the appearance of M10P1.0 is under arrangements and it receives although it is Versys650 with few somethings and amounts of information.
View detail
It is dramatically convenient for Plug exchange. If it tries to use a tool besides , buying it, it will be too long and will hit a Battery, and he is Ore Mai Ge (-_-)!! There was a good tool and it was good.
It is dramatically convenient for Plug exchange.
If it tries to use a tool besides
, buying it, it will be too long and will hit a Battery, and he is
Ore Mai Ge (-_-)!!
There was a good tool and it was good.
View detail