![icon-webike.png](https://thimg-afcc.kxcdn.com/@wth-shop/assets/desktop/img/icon-webike.png)
Reviews
![Mirror Shield VAS-V](https://img.webike-cdn.net/catalogue/images/26266/mirror_shield_arai_TS.jpg)
Blue is this color.
I purchased Titaniumium blue in Semi-smoke.
I like that it is Mirror so it is hard to see the line of sight from the outside.
[Color] Because it is Smoke, it seems to look a little dark at night, but it is not a Level that is particularly bothersome.
I think it would be better to refer to the ManufacturerHP, as the appearance seems to vary quite a bit with respect to the exterior color.
However, it seems that Blue and Orange are reversed on webike's product page compared to the ManufacturerHP ….
View detail
![Mirror Shield CNS-1 Pinlock](https://img.webike-cdn.net/catalogue/images/119308/mirror_r3_c1-02_TS.jpg)
Fits: Others GT-Air II, Others GT-Air, Others NEOTEC
Image differs from the image.
Buy Titaniumium blue
From the inside, the color is not as blue as the picture, and there is almost no color at the center.
From the outside, you cannot see the face from both ends because of the Mirror effect, but you can recognize the face as it fades toward the center.
I'm a little disappointed because I was expecting an overall Mirror!
View detail
![Mirror Shield CNS-3 Pinlock](https://img.webike-cdn.net/catalogue/images/119308/mirror_r3_c1-02_TS.jpg)
The Helmet will make Parenthesis even better!
[Base color [Color] Clear
Mirror coating color Titaniumium silver
BaseShield is fine with OEM; OEMPin lock can be installed, of course.
Clear base, but you can't see my face and it's not too dark. As for my usability, I am very satisfied with this product.
View detail
![TSI-002 Cool Max Cooling Inner Cap](https://img.webike-cdn.net/catalogue/images/49957/uv_003_TS.jpg)
Surprisingly, this is a product that is difficult to find the right time to use. But if you are in Japan from now on, you can use this as a Standard...
It is hard to tell from the photo, but the hanging part in the back is designed to retain a little water and seems to contain Polymer. So if you wet it beforehand, it will be much cooler by vaporization heat.
In mid-summer, the most annoying thing about riding a motorcycle is the sun shining on your back.
Neckline protruding from the helmet (nape) I know that NeckTube burns very hard. I was not interested in wearing NeckTube in the middle of summer, so I bought this product because I had been interested in it for a while.
By the way, I also use Cool max inner without droop. I definitely recommend this type of Inner Cap because it prevents dirt, etc. on the interior to begin with.
Just a little embarrassing when taking it off and on! The effect is immensely Large and I recommend it for everyone. I use it year round in my case. (Although the interior is sometimes washed as well.)
This product combines the Inner Cap with sun protection for the nape of the neck. It can be said that the extreme heat is Target's product.
The appearance is well, I think it is acceptable with Helmet on, but the problem is non-Guard for the sun from the side....
However, there is no other good product, and if I could do it, I would have to use NeckTube together.
This product is to be used for water retention and as an Inner Cap.
One thing to note is that it will retain water, but depending on the amount, it will drip, so Color like the one in the picture where the edge hits:Note that if you are wearing a gray cotton shirt or something like that, it will look sweaty and wet.
The best would be something like BlackInner, a quick-drying Material.
Riders in Japan should try various things to prepare for the coming hot summer and have an enjoyable motorcycle life!
View detail
![Mirror shield CWR-F2Pin lock](https://img.webike-cdn.net/catalogue/images/119308/mirror_r3_c1-02_TS.jpg)
Fits: Others X-Fifteen, Others Z-8(Standard Shield)
It is a convincing coating.
Dare to be visible within Tunnel "Mellow Smoke. I chose to use the "I" option, and the visibility was excellent when I looked through it outdoors.
If I had to say so, I would have preferred not to have coated the inside, but upon closer inspection, it appears to have been lightly coated.
When the Helmet arrives, I would like to install it and check the light reflection.
In the past, I purchased another Manufacturer's product, BaseShield. [Color] It was Smoke, but I am a little bit worried because it was hard to see my face reflected by the inner coating, but I have high expectations for this product.
View detail
![Mirror Shield VAS-V](https://img.webike-cdn.net/catalogue/images/26266/mirror_shield_arai_TS.jpg)
Good visibility
The previous Mirror shield was replaced with a small scratch that was noticeable.
Cleaning with Chemical is not a good idea.
From now on, I will consider it a consumable item and replace it immediately.
View detail
![Mirror Shield VAS-V](https://img.webike-cdn.net/catalogue/images/26266/mirror_shield_arai_TS.jpg)
Cool lens
This T's helmet mirror lens purchased on webike is for ARAI RX-7X. Although it is not the original lens, the effect is good enough to match the helmet completely. It has 99% UV blocking and waterproof coating. The visibility is higher in rainy days. The disadvantage is that it is not suitable for use at night and will affect safety. In short, it is highly recommended to buy, and the price is very affordable. -------------------------------------------------- -------- This T'S helmet mirror lens purchased at Webike is used for ARAI RX-7X. Although it is not the original lens, the effect is good enough to fully match the helmet. It has 99% of ultraviolet barriers and waterproof coatings. It can be higher in rainy days. The disadvantage is that it is not suitable for use at night to affect safety. In short, it is recommended to buy and the price is very affordable. Powered by Google Translator View detail
![Mirror Shield Super Adjust I](https://img.webike-cdn.net/catalogue/images/26266/mirror_shield_arai_TS.jpg)
Is it too dark in some scene?
I was using ARAIOEMSemi-smoke, but I had a complaint that it was quite transparent from the outside, so I rolled the Helmet and replaced it with this one by Timing, which has scratches on the guts and Shield.
Mirror processing is applied to the ARAIOEM, so [Color] If you make it to Smoke. [Color] The darkness of the Mirror process is added to the darkness of the Smoke process, so the streets are visible when driving at night. [Slightly] It is really too dark to see in front of you even in the few scenes.
It is really scary in places where there are no streets. I use it to commute to work and come home late at night, so I think the light smoke processing would have been better for me. 。 I think it is Exactly for those who only use it during light hours or in situations where there is a firm street presence.
View detail
![TSI-003 Cool Max Inner Cap](https://img.webike-cdn.net/catalogue/images/49957/uv_005_TS.jpg)
A summer must!
Looser than I thought!
When I take off my Helmet, sometimes it comes off with me.
Ideal for Touring in midsummer.
Even if it absorbs sweat, it dries quickly.
Quantity:1 Set of 2pcs. with good cost performance!
View detail
![TSI-001 Anti UV Arm Cooler](https://img.webike-cdn.net/catalogue/images/49957/uv_001_TS.jpg)
short
Size:The fit is small, perhaps because it is a free product, and when worn, it feels very tight. The length is short, and when worn around the wrist, the upper arm comes out of the sleeve of the T-shirt.
As a shopping experience, it was a failure. As a result, I bought other products.
Incidentally, the length is 30 cm when laid flat. no matter how elastic it is, it's still a little short...
View detail
![TSG-48B Mesh Glove](https://img.webike-cdn.net/catalogue/images/96254/tsg48b-01-zoom_TS.jpg)
costa-perfect
I can wear FOR JAPAN MODELBrand gloves in XL without any problem, so I bought XL again this time.
The length and width are JUST right, but I don't like the fact that I can't take them off easily.
However, CE Standard fist Protector, Finger protector, Reflectoretc.etc.
I think it is a good cost performance because it is less than 6,000 yen for a complete set (Protector is Soft Type).
The phone is also compatible, but I don't mess with it with Gloves on, so accuracy is unknown.
View detail
![PINLOCK Mirror Shield CWR-1](https://img.webike-cdn.net/catalogue/images/26266/mirror_shield_shoei_TS.jpg)
fashion-conscious
Unlike the NORMAL Clear shield, the appearance is completely different.
Aside from looking very cool, they also block out the sun and reduce glare.
Items very effective in many ways.
View detail
![TSI-003 Cool Max Inner Cap](https://img.webike-cdn.net/catalogue/images/49957/uv_005_TS.jpg)
Convenient
It is useful to have for summer Touring.
It can be worn before wearing the helmet to protect the inner helmet from steam and perspiration.
It is a thin fabric that dries quickly and is comfortable to wear.
Quantity:1 Set of 2pcs. so it can be used alternately.
View detail
![TSI-001 Anti UV Arm Cooler](https://img.webike-cdn.net/catalogue/images/49957/uv_001_TS.jpg)
sunblock
It can also be used to prevent sunburn on the arms and
If you wear it under a mesh jacket, it will be smooth in the arms.
The cooling effect makes it cool and comfortable when the wind hits it.
View detail
![Mirror Shield VAS-V](https://global.webike-cdn.net/photo/impression/2e/2eb6340c679a498d235efe668b2d200fL.jpg)
I like the Titaniumium coating!
What made you decide to buy?
I installed it on my recently purchased ARAI:RX-7X PedrosaDesign helmet. When I started riding motorcycles, most of the shield replacements were Smoke Shield replacements. As time goes by, there are more and more options to replace the shield, and the helmet is one of those items that allows you to express your individuality. In case you are wondering, I am a shy person... I always replace the shield so that people can't see my face through the shield.
How was your experience with it?
Installing the Shield is much easier on the RX-7X than on the other ARAIHelmet, the Quantum Compared to the other ARAIHelmet, the Quantum -J, the RX-7X is very easy to install. I purchased the Mirror shield in Base Color:Smoke/Mirror coatingColor:It is blue. Since it is a Titaniumium color, the appearance of the shield color will change if the viewing angle changes. If I were to use a metaphor, I would say that it looks like a Titaniumium Exhaust or Titanium Exhaust Manifold. I don't think you can see my face even from the outside. I am a shy person, so this is perfect for me.
Next is the Impression from Shield, where the Base color is [Color] This is the DARKSmoke that I installed on my SHOEI Z-7 Helmet. According to the manufacturer's website, the Titaniumium blue shield that I purchased is the best choice for me because it looks brighter than the Shield. A slightly blue tint to the vision. Less color change and easier to see." It is described as follows. I'm looking forward to seeing how the seasonal changes of spring sky, mid-summer sunshine, autumn sky, mid-winter sky, etc. will look like through the shield. Here are some images of how the mirror shield I purchased looks. The photos were taken indoors under fluorescent lighting. I took pictures of the object without the shield and through the shield. (There is a difference in the way it looks depending on the monitor environment, so please consider this as a reference.)
Before installing the shield, apply a small amount of silicone oil to the sliding part of the shield. The instruction manual says, "Do not get silicone oil on the surface of the shield. Do not get it on the shield surface! Also, the Mirror shield is a delicate piece, so be careful when handling it.
View detail
![PINLOCK Mirror Shield CWR-1](https://global.webike-cdn.net/photo/impression/45/455d26e40e9f5d2f633da9aee84bb129L.jpg)
I'm too shy to go to ・・・・ (laughs)
What made you decide to buy?
SHOEI:Z-7 Marquez Design Helmet Image Chain and my shyness... I replaced the helmet with a mirror shield so that people can't see my face through the shield (lol).
How was your experience with it?
Compared to the ARAI, the SHOEI is super easy to install. I think even women can install it easily. The appearance of the bike is great, and the parenthesis is so good that I wish I could see myself riding the bike with my own eyes.
until now [Color] I've been using Smoke's Shield, and while I was able to run with it in the Tunnel, I purchased the Base Color:Dark Smoke、CoatingColor:This is Orange. My impressions of the test run... Date:January 15, 2022, 2:00 p.m. Weather:Cloudy conditions. As mentioned in another user's review, the middle of the shield seems to be darker in color.:Pair (for Left and Right) I am using the ARAI Helmet with a blue mirror shield. When I installed the ARAI mirror shield, I felt uncomfortable, but I got used to it as I used it, so I am sure I will get used to this mirror shield as well. I also found it interesting to see how the different coating colors look differently.
This time, I'm looking forward to seeing how it will look like on a cloudy midwinter afternoon... or mid-summer afternoon sunshine. I just purchased the Shield Base Color:Dark Smoke. I think it might be dangerous at night, and it might be difficult to see inside the tunnel. I would like to drive safely with this in mind.
View detail
![PINLOCK Mirror Shield CWR-1](https://global.webike-cdn.net/photo/impression/0e/0e8d46576f8abaacd0f0e353bc717000L.jpg)
Parenthesis good is the best.
When it comes to Full face Helmets, you can't go wrong with the Mirror shield, it's the same precision as the OEM shield, installs flawlessly, looks great and gives you great visibility. View detail
![TSG-19A Leather Gloves](https://global.webike-cdn.net/photo/impression/07/078e18f6f091f1f327c9a76e15031fd5L.jpg)
MADE IN JAPAN
I bought these gloves because the cowhide leather short glove made by LEAD Industries that I had been using for the past 6 years became quite tired and the seam of the thumb part was torn.
The sewing is firm only in JAPAN, and leather is not too thick and supple, and I am satisfied because it is easy to move a finger. I always wear Glove in L Size and Large body is just right, but this Glove is just a little small. I think it will stretch a little while using it, so it will not be a problem.
I think the price within 6000 yen is cheap for this quality of JAPAN cowhide short glove.
View detail
![TSI-001 Anti UV Arm Cooler](https://img.webike-cdn.net/catalogue/images/49957/uv_001_TS.jpg)
Large in the summer
If you wear it when you wear a mesh jacket in summer, you will feel smooth when you put on and take off the jacket. It also has a cooling effect that makes you feel cooler when the wind hits you, and it has antibacterial and deodorant processing, so it is useful in the summer. View detail
![TSI-003 Cool Max Inner Cap](https://img.webike-cdn.net/catalogue/images/49957/uv_005_TS.jpg)
Quantity:It is cheap in 1 Set of 2pcs.
The Inner Cap is ideal for summer touring, it can be worn before wearing a helmet to prevent the Inner Pad from getting dirty and has a cooling effect to prevent steam. The quick-drying, thin fabric is comfortable to wear and has a quantity:1 Set of 2pcs. is a great value. View detail