Reviews
Blue is this color.
I purchased Titaniumium blue in Semi-smoke.
I like that it is Mirror so it is hard to see the line of sight from the outside.
[Color] Because it is Smoke, it seems to look a little dark at night, but it is not a Level that is particularly bothersome.
I think it would be better to refer to the ManufacturerHP, as the appearance seems to vary quite a bit with respect to the exterior color.
However, it seems that Blue and Orange are reversed on webike's product page compared to the ManufacturerHP ….
View detail
Fits: Others GT-Air II, Others GT-Air, Others NEOTEC
Image differs from the image.
Buy Titaniumium blue
From the inside, the color is not as blue as the picture, and there is almost no color at the center.
From the outside, you cannot see the face from both ends because of the Mirror effect, but you can recognize the face as it fades toward the center.
I'm a little disappointed because I was expecting an overall Mirror!
View detail
The Helmet will make Parenthesis even better!
[Base color [Color] Clear
Mirror coating color Titaniumium silver
BaseShield is fine with OEM; OEMPin lock can be installed, of course.
Clear base, but you can't see my face and it's not too dark. As for my usability, I am very satisfied with this product.
View detail
Fits: Others X-Fifteen, Others Z-8(Standard Shield)
It is a convincing coating.
Dare to be visible within Tunnel "Mellow Smoke. I chose to use the "I" option, and the visibility was excellent when I looked through it outdoors.
If I had to say so, I would have preferred not to have coated the inside, but upon closer inspection, it appears to have been lightly coated.
When the Helmet arrives, I would like to install it and check the light reflection.
In the past, I purchased another Manufacturer's product, BaseShield. [Color] It was Smoke, but I am a little bit worried because it was hard to see my face reflected by the inner coating, but I have high expectations for this product.
View detail
Good visibility
The previous Mirror shield was replaced with a small scratch that was noticeable.
Cleaning with Chemical is not a good idea.
From now on, I will consider it a consumable item and replace it immediately.
View detail
Cool lens
This T's helmet mirror lens purchased on webike is for ARAI RX-7X. Although it is not the original lens, the effect is good enough to match the helmet completely. It has 99% UV blocking and waterproof coating. The visibility is higher in rainy days. The disadvantage is that it is not suitable for use at night and will affect safety. In short, it is highly recommended to buy, and the price is very affordable. -------------------------------------------------- -------- This T'S helmet mirror lens purchased at Webike is used for ARAI RX-7X. Although it is not the original lens, the effect is good enough to fully match the helmet. It has 99% of ultraviolet barriers and waterproof coatings. It can be higher in rainy days. The disadvantage is that it is not suitable for use at night to affect safety. In short, it is recommended to buy and the price is very affordable. Powered by Google Translator View detail
fashion-conscious
Unlike the NORMAL Clear shield, the appearance is completely different.
Aside from looking very cool, they also block out the sun and reduce glare.
Items very effective in many ways.
View detail
Convenient
It is useful to have for summer Touring.
It can be worn before wearing the helmet to protect the inner helmet from steam and perspiration.
It is a thin fabric that dries quickly and is comfortable to wear.
Quantity:1 Set of 2pcs. so it can be used alternately.
View detail
sunblock
It can also be used to prevent sunburn on the arms and
If you wear it under a mesh jacket, it will be smooth in the arms.
The cooling effect makes it cool and comfortable when the wind hits it.
View detail
I like the Titaniumium coating!
What made you decide to buy?
I installed it on my recently purchased ARAI:RX-7X PedrosaDesign helmet. When I started riding motorcycles, most of the shield replacements were Smoke Shield replacements. As time goes by, there are more and more options to replace the shield, and the helmet is one of those items that allows you to express your individuality. In case you are wondering, I am a shy person... I always replace the shield so that people can't see my face through the shield.
How was your experience with it?
Installing the Shield is much easier on the RX-7X than on the other ARAIHelmet, the Quantum Compared to the other ARAIHelmet, the Quantum -J, the RX-7X is very easy to install. I purchased the Mirror shield in Base Color:Smoke/Mirror coatingColor:It is blue. Since it is a Titaniumium color, the appearance of the shield color will change if the viewing angle changes. If I were to use a metaphor, I would say that it looks like a Titaniumium Exhaust or Titanium Exhaust Manifold. I don't think you can see my face even from the outside. I am a shy person, so this is perfect for me.
Next is the Impression from Shield, where the Base color is [Color] This is the DARKSmoke that I installed on my SHOEI Z-7 Helmet. According to the manufacturer's website, the Titaniumium blue shield that I purchased is the best choice for me because it looks brighter than the Shield. A slightly blue tint to the vision. Less color change and easier to see." It is described as follows. I'm looking forward to seeing how the seasonal changes of spring sky, mid-summer sunshine, autumn sky, mid-winter sky, etc. will look like through the shield. Here are some images of how the mirror shield I purchased looks. The photos were taken indoors under fluorescent lighting. I took pictures of the object without the shield and through the shield. (There is a difference in the way it looks depending on the monitor environment, so please consider this as a reference.)
Before installing the shield, apply a small amount of silicone oil to the sliding part of the shield. The instruction manual says, "Do not get silicone oil on the surface of the shield. Do not get it on the shield surface! Also, the Mirror shield is a delicate piece, so be careful when handling it.
View detail
Parenthesis good is the best.
When it comes to Full face Helmets, you can't go wrong with the Mirror shield, it's the same precision as the OEM shield, installs flawlessly, looks great and gives you great visibility. View detail
MADE IN JAPAN
I bought these gloves because the cowhide leather short glove made by LEAD Industries that I had been using for the past 6 years became quite tired and the seam of the thumb part was torn.
The sewing is firm only in JAPAN, and leather is not too thick and supple, and I am satisfied because it is easy to move a finger. I always wear Glove in L Size and Large body is just right, but this Glove is just a little small. I think it will stretch a little while using it, so it will not be a problem.
I think the price within 6000 yen is cheap for this quality of JAPAN cowhide short glove.
View detail
very happy with this shield
I have owned four previous Arai helmets and bought tinted shields for each. The is the best I've owned. The fit is good as is the quality. View detail
It's neat
I bought it with a pinlock and put it in right away. There are no flaws and no flaws, so it was my first time, so I didn't know how to put it on, so I was a bit confused, but I saw it on YouTube. admit it? I bought it with Pinak and put it right there. No scratches, no let's. I did not know how to play it because it was my first time. Helmet writes Arai xd Oriental m Please buy it by referring to ~ Oki? Recognition? Accreditation translated by Google Translator View detail