Reviews
![RearShaft protector[Rear axis protectors]](https://img.webike-cdn.net/catalogue/images/41365/PK1_pict_00_web_TS.jpg)
Fits: SUZUKI GSX-R 1300 Hayabusa
RearShaft protector
I installed it in case of an accident. I don't know how effective it is yet, but I think it is good for drive shaft protection. I think you can enjoy customizing it to match your motorcycle. View detail
Fits: HONDA CBR1000RR FIRE BLADE ABS
Axle Slider
Installation was easy. It looks … not cool. View detail
Fits: YAMAHA MT-09, YAMAHA MT-09 ABS
Better made than I expected.
Purchased from WeBig.
It was an order item but arrived earlier than originally scheduled.
ProtectorBody is Quantity:Pair (for Left and Right) If you don't make a mistake, you will get it right because there is a difference between the two.
However, the PenetratingShaft is Stainless Steel, but the Washer and Lock nut are Steel.:Stainless Steel was purchased separately.
View detail
Good cost performance and one point color options
Good product at a relatively low price.
It is an overseas product, so the delivery time is about one month? It takes time.
For installation, the Nut inside the DURACON must be
Clearance is narrow, so 13 deep sockets are Quantity:2pc. Set required.
View detail
![RearShaft protector[Rear axis protectors]](https://global.webike-cdn.net/photo/impression/31/31c8dcdd6574680a594e5e3e7f80cd4cL.jpg)
Cost performanceGood
Good product at a relatively low price.
It is an overseas product, so the delivery time is about one month? It takes time.
I received a different Size to begin with, but they replaced it properly.
For installation, the Nut inside the DURACON must be
Clearance is narrow, so 13 deep sockets are Quantity:2pc. Set required.
View detail
There's gonna be an exchange.
I don't know if it's because I haven't experienced the effect yet, but it seems to play a role well in case of emergency because the Slider is sticking out widely.
The installation is a little Habit, and the position of Nut is Quantity because Shaft is a little long.:Pair (for Left and Right) The shaft is not even, etc., and the shaft is long on the left side in the tightened position.
Because of that, the NutCap of the Left Side was not loaded tightly, and it came off and lost by vibration. I noticed it was missing about 2000km after I installed it, and there was no replacement, so the Nut was left exposed and a little awkward.
No complaints except that it is easy to lose the Cap.
View detail
Costa is good, but...
Super easy to use Instruction Manual and simple package of parts only. (Bagged) It is
I also bought the product for Rear, and it is almost the same content.
It is natural, but because screw is cut on both sides, it is not easy to install by yourself.
It can be difficult, especially if it's your first time.
One Side Only Quantity:I wish it had been set.
I couldn't turn the nut well, so I gave up the installation once.
Socket for now (Wrench) I'm going to try again to install them because I was able to secure two
If I can't install it, I might ask a shop to do it for me.
POM-CMaterial is said to be resistant to abrasion, but it is a flammable material.
It is not clear if it can withstand the terrible friction that sparks are produced.
It's just a matter of being careful not to knock them over...
View detail
![RearShaft protector[Rear axis protectors]](https://global.webike-cdn.net/photo/impression/23/23fcad704f8379937f7f28bedc3e5388L.jpg)
I love it!
I'm using it on a '15 cbr600rr. for Front's and I put it on my rear! I don't know about the effect as I haven't fallen down yet, but I like it as a dress-up part. View detail
I like it.
I installed it on my 2015 reverse car and purchased it as a guard in case it tipped over. I don't know how well it works as it hasn't tipped over yet, but I like the Design. View detail
Costa Rica!
I bought it with Front.
It's like a walking stick that you can't fall on.
It's a good thing you don't have a chance to play an active role, but if you get a scratch on your Front fork or Swing Arm, it's not easy to fix.
The same product is also available at the Manufacturer of the FOR JAPAN MODEL, but the quality is better. It's very expensive!
This one is inexpensive and the quality of the look and feel is perfectly fine.
It's hard to say how much protection it offers until it's mossy.
View detail
Costa Rica!
I bought it with Front.
It's like a walking stick that you can't fall on.
It's a good thing you don't have a chance to play an active role, but if you get a scratch on your Front fork or Swing Arm, it's not easy to fix.
The same product is also available at the Manufacturer of the FOR JAPAN MODEL, but the quality is better. It's very expensive!
This one is inexpensive and the quality of the look and feel is perfectly fine.
It's hard to say how much protection it offers until it's mossy.
View detail
Satisfied with Cospa
I was worried because the AxleBolt hole diameter of the CB650R only allows for M5 to pass through, but I was worried that the hole diameter of the CB650R together Large Bolt is Quantity:Because it was set, it becomes possible to set only by replacing the OEMBolt and the worrying matter is [Color] Clear. however, the BoltScrew thread of the Set is inaccurate, so if you screw it in as it is, it will not be a good fit for the Screw It felt like it was going to cause a bite
So, unless you are able to finish the screw pile with a modified Dice or Precision File, be careful!
View detail
I'd say it's an 80 (^^)
Initially, two months' waiting time for the order (>_<) In response to Ue-Big's reply, (do I have to wait that long? I'm giving up.) I'm not sure what to think However, it arrived today, June 10th, and I'm relieved to hear that it's arrived today I'm so relieved that it arrived so quickly! 。 Well, it was the end of an early day of work today, so I installed it while painting it, which was easier than FRONT I put it on once to try it out, checked it out and painted it What's inside is SliderGuardQuantity:Pair (for Left and Right) WheelShaft PenetratingBolt (one piece each) Bolt cap (one piece) One of each, Quantity:Pair (for Left and Right) (Wrong dimensions) This is the English version of the instruction manual 。 Put PenetratingBolt in from the Exhaust System side and Tighten on the Chain side (with SliderGuard of course) de re-tightening I used two Ratchets, one side was 13mm and the other side was 10mm After that, put the Cap on and that's it If you don't paint it, it will be done in 10 minutes I will do the test run now View detail
Fits: YAMAHA MT-07
I don't know if it's the right year, but it's 58 points
My MT-07 is a 2018 model, but the installation (which seems to be common to ALL MODEL) is It's very simple, but it has a drawback:you have to put one of the wheels from the Left into the WheelShaft SliderGuard and co-tightening Shaft together, and Right I apply SideSliderGuard and tighten the Shaft, but I don't know why Do you think that the Right Side is tightened at an angle...? Is the pie in the wrong place? The point is, Guard's pie is too big,...do you want him to bite the gold in the seat? Or do you want to cut it down, or...? I chose the latter, and I sharpened it I used electric tools for the time, so it's not so bad It's a perfect fit It was fixed perfectly I tightened both bolts, and then covered with the catsuit The test run was done, but it is OK When the mileage increases, I want to tighten the bolts View detail
It is cheaper than FOR JAPAN MODELManufacturer
It's cheap to buy both front and back, which is the FOR JAPAN MODELManufacturer I'm not sure if you can afford it, but I think you can buy it, and the large size of the protector part is good Material also seems to be strong
As for the installation, both sides of the Shaft are cut in a groove, so tighten them up equally You need a hang to I welded a nut on one side to prevent it from turning
View detail
If the structure is similar Motorcycle ? ? ?
It is Xake Wash with XSR 900 (RN 46J type) I used it. Since Base is MT - 09, it can be attached without any problem.
As for the effect, it can not be confirmed because it is the product whose true value is demonstrated only after falling over. As much as it does not happen to the extent that it exerts its effect ^ ^;
If it raises the difficulty strongly, the Nut for installation is 13 mm Nut which is not much used in domestic cars. I hope I had it, but some people do not have it ~.
View detail
It is lengthy
The length of Shaft? Is not at all (Lol)
There are around 35, but in fact it is 30?.
I bought only Shaft at the nearby Home center
It looks like Fashion
View detail
Reliable feeling in case of emergency.
Rear's Axle Slider Guard probably thought that it had no effect as I expected, but I thought it was better than not attaching it pleasantly. I think that it is good to refresh the appearance. View detail