Reviews
Fits: YAMAHA XSR 700, YAMAHA MT-07, YAMAHA XSR 700
Precautions
I am embarrassed to say that I have been standing around a few times since purchasing the MT07
Fortunately, there has been no damage to Large so far, but I bought it for the future!
It is easy to install with the Rear Stand
The installation itself is not particularly difficult
It uses a Hexagonal Wrench, so if you don't have one, you need to purchase one in advance
It is safe because it can protect the water pump area under the waist of the engine, especially on the Right Side Is?
View detail
Cost performance good
It guards the lower part of the tank from falling down
I never thought I'd be able to experience its effects within a round of purchase
I never imagined it would happen Crying
It's easy to price
A cheap Fog light was also installed
View detail
Cospa is expensive, but I'm not so sure about the price
With the attached Bolt, it is a little short and cannot be installed I thought about returning it, but I bought a little long Bolt at the nearby home center and installed it is just one more thing, two longer, and the installation is Smooth, but I wonder why View detail
I'm not happy with the installation
To go ahead with the results, it seems to have come off while driving and was lost
The pedestal and the Slider are separated However, the engine mounting bolts hit the engine mounting bolts before the seat surface and cannot be completely tightened Mm
I think this is because of the design of this product, but I think the design is wrong
If you use it, don't forget to apply Screw Lock and check for looseness on a regular basis
View detail
Rdmoto engine guards
Excellent product, easy enough to install with basic tools, looks good. Shipping took a while, but webike communicated very well. View detail
Fits: YAMAHA XSR 700, YAMAHA MT-07, YAMAHA XSR 700
I don't know about the Crash performance because I haven't crashed it yet
It took me about an hour to install it, and it looks great It is refreshing and I'm happy with it, I don't know how strong it is at crashing yet View detail
![RDMOTO Center Stand [Center Stand RDMOTO -]](https://global.webike-cdn.net/photo/impression/48/4896330a6e5d6f56118d2a46d00a2e5bL.jpg)
I am satisfied
I've been wanting a Center Stand on my poorly maintained TDM 850 They were all over $3,000.00 I would recommend this product as it is cheap and easy to install
The method of installation is to put STANDBase between the Footpeg Plate and STANDBody Just use Split Pin to hold it in place
The work took about 30 minutes
View detail
If you're looking for a good costumer, this is it
I don't know how effective it is because I haven't fallen over yet, but it seems to protect me well because of the large size It is
I don't mind, but it also comes with a Bolt cap, so if you can see the head of the Bolt, it looks tacky You might be happy with the way you feel
Best of all, it's cheap
View detail
Almost satisfied
For the installation, I translated it (although there were no instructions for typing it in here, I can see it in the picture We managed to get it installed, and it's solidly accurate, so we shouldn't have any problems with it, except for the fall-guard I have a feeling the Handlebar will be grounded first, but I won't know how far I can go until I roll over Because Protection only 3 points
It seems to be less expensive than the other products, but it's a good quality, so it seems to be a good value for money
The long screwdrivers are attached with lock nuts from both sides, but I don't know where they are attached It was hard to tell. We'll just have to balance the screw out and see how it comes out
View detail
I bought it at a special sale, so it was a great costumer!
I had the Motorcycle shop put it on before delivery It was 2km from delivery and it was the middle of winter + Brand new Tire + Left turn + crosswalk White Line SlipDown in combination with White Line SlipDown (xox)
In combination with the Engine Guard, which is installed separately, it did a good job It was not able to reach Large Clutch lever bent, but (^^;
In terms of the amount of gold purchased, the costumes are not too bad
However, according to the motorcycle shop, it seems to have been installed to the Limit, so be careful about looseness and such It's only subtle to the point that I was asked to put it on
View detail
![Upper + Lower Crash Frames [Upper + Lower Crash Frames]](https://global.webike-cdn.net/photo/impression/d2/d26495501ce6cf5604137be96b85b447L.jpg)
Fits: HONDA CRF 1000L Africa Twin DCT - black
Very good
I have not fallen yet, so I do not know the strength, but I think Cospa is good.
However, if you wear OffBoots and step on Brake pedal you surely interfere with the Guard below.
Of course, Brake can stepping on, but it will be interfered one by one.
Ordinary Boots may be Large sturdy.
View detail
Fits: DUCATI MONSTER1100, DUCATI MONSTER696, DUCATI MONSTER796
I think that it is a very good product if it judges by the price.
Please note that in the conformance chart described in the Catalog, MONSTER S2796 is not fitted together with Shaft length both before and after.. Since Front interferes with Axle, Shaft length is not enough in reverse. View detail
Included Parts : Shortage
MT-07 (2018) A ride. There was no problem with the installation of this product. However, the cap cover of the hexagonal screw that fixes and fixes the product was not included. Inquiries, about 3 weeks waited for the answer "Although the front has a cap, since the size of the left and right screws are different, the cap is not originally attached because it is the rear" And.... Hmm?... It was that kind of feeling. If my eyes are decent, the product picture has a cap attached. What's more, what's included in the same product for the front for accessories and for rear for not included? "Takaka cap is about" Did it seem so?. There is no item that is supposed to be there.... Although there was sense of incongruity in answer content, I thought that there was no decent answer, no correspondence, I give up more than this. Even if it is a product made in a foreign country, how about just passing along the answer received from the manufacturer.... However, indeed I am sorry if there was no cap for the rear, so I think if you can post the presence or absence of the screw cap cover included with other MT-07 rides purchased this product. I think the product itself is a good one. View detail
If the structure is similar Motorcycle ? ? ?
It is Xake Wash with XSR 900 (RN 46J type) I used it. Since Base is MT - 09, it can be attached without any problem.
As for the effect, it can not be confirmed because it is the product whose true value is demonstrated only after falling over. As much as it does not happen to the extent that it exerts its effect ^ ^;
If it raises the difficulty strongly, the Nut for installation is 13 mm Nut which is not much used in domestic cars. I hope I had it, but some people do not have it ~.
View detail
It is lengthy
The length of Shaft? Is not at all (Lol)
There are around 35, but in fact it is 30?.
I bought only Shaft at the nearby Home center
It looks like Fashion
View detail
Fits: YAMAHA XSR 700, YAMAHA MT-07, YAMAHA XSR 700
Installation precision Highly likely to work I do not want to take care of me
Radiator Water pump, etc. It seems to be protected if it is a minor fall, but it is not uncommon though Engine Guard ... I personally recommend it View detail
![Upper + Lower Crash Frames [Upper + Lower Crash Frames]](https://global.webike-cdn.net/photo/impression/0a/0a817932181b55f12d3a313366d1fd73L.jpg)
Fits: HONDA CRF 1000L Africa Twin DCT - black
The cheapest in Set of Upper Lower for DCT
There are few alternatives for DCT.
Installation is not difficult, but anyway Engine Mount's Bolt is hard!
Since it is burned by heat and fixed, we recommend spraying penetrant beforehand
Double-end WrenchQuantity : I pushed with limbs using 2pc and got relaxed
Temporarily assembled and noticed but close to Filter lid for DCT
Circular Rubber is attached but Rubber can not be turned on as Filter lid can not be removed.
Although there are pictures in the instruction manual, Bolt which removes it because there is no instruction particularly with arrows
It was hard to understand.
It is more efficient to leave NORMAL's Under Guard first.
I watched it in other people's videos but because the wall thickness of the overhang of the engine is thin
It seems that there is a hole in SlipDown at the riverbed gravel.
It was helpful for LowerGuard selection criteria this time.
It is Large enough that you can go home and move home. The price is also cheaper than other manufacturers and it is saved
View detail
![Upper + Lower Crash Frames [Upper + Lower Crash Frames]](https://img.webike-cdn.net/catalogue/images/41365/CF68KD_pict_1487323627846841_web_TS.jpg)
Fits: HONDA CRF 1000L Africa Twin DCT - black
The cheapest in Set of Upper Lower for DCT
Choice this product because there are few options for DCT
I installed it myself. Please refer to the following
Instruction Manual is Large miscellaneous photo so trial and error on installation position
NORMAL's Engine Mount and LowerFrame's Bolt, Nut are hard anyway
It was the hardest penance.
It is irritating with a miscellaneous tool. Let's use chitin and Double-end Wrench!
Rubber is attached near Oil Filter for DCT
I removed it as it disturbs the removal of Filter cover.
Surprisingly the hole position fitted perfectly as it was overseas goods It is almost nice feeling
View detail
I think that Design and features are also good products
Since there was a point, I bought it at almost half price
Since it is an overseas product, it was reported that it was waiting for 3 months but it was handy in about 1 month ,,,
Because it is made abroad, Instruction Manual was sloppy,
While referring to the small number of parts and installation of other products on youtube
Work ends in about 10 minutes.
Screw was a bit long, but no problem.
It seems that you can expect better functions as well.
View detail
Fashionable and practical
Speaking of Frame slider is a simple color Material : Where there are many DURACON items, various colors can be selected with the combination of Body and Cap?.
My Motorcycle is a type 2 R1 and a little old SS, and while compatible items are disappearing from Lineup of Aftermarket parts manufacturers companies, this product was a wonderful existence.
Although I do not know the original effect unless it overturns, I think that it is not bad as insurance meaning and Dress-up.
View detail